Influence of the pore structure of MCM-41 and SBA-15 silica fibers on atomic layer chemical vapor deposition of cobalt carbonyl

Mesoporous high surface area MCM-41 and SBA-15 type silica materials with fibrous morphology were synthesized and used as support materials for the ALCVD (atomic layer chemical vapor deposition) preparation of Co/MCM-41 and Co/SBA-15 catalysts. Co/MCM-41 and Co/SBA-15 catalysts were prepared by deposition of Co2(CO)8 from the gas phase onto the surfaces of preheated support materials in a fluidized bed reactor. For both silica materials, two different kinds of preparation methods, direct deposition and a pulse deposition method, were used. Pure silica supports as well as supported cobalt catalysts were characterized by various spectroscopic (IR) and analytical (X-ray diffraction, Brunauer-Emmett-Teller, elemental analysis) methods. MCM-41 and SBA-15 fibers showed considerable ability to adsorb Co2(CO)8 from the gas phase. For MCM-41 and SBA-15 silicas, cobalt loadings of 13.7 and 12.1 wt % were obtained using the direct deposition method. The cobalt loadings increased to 23.0 and 20.7 wt % for MCM-41 and SBA-15 silicas, respectively, when the pulse deposition method was used. The reduction behavior of silica-supported cobalt catalysts was found to depend on the catalyst preparation method and on the mesoporous structure of the support material. Almost identical reduction properties of SBA-15-supported catalysts prepared by different deposition methods are explained by the structural properties of the mesoporous support and, in particular, by the chemical structure of the inner surfaces and walls of the mesopores. Pulse O2/H2 chemisorption experiments showed catalytically promising redox properties and surface stability of the prepared MCM-41- and SBA-15-supported cobalt catalysts.     

Experimental analysis, modeling, and theoretical design of McMaster pore-filled nanofiltration membranes

A side-by-side comparison of the performance of McMaster pore-filled (MacPF) and commercial nanofiltration (NF) membranes is presented here. The single-salt and multi-component performance of these membranes is studied using experimental data and using a mathematical model. The pseudo two-dimensional model is based on the extended Nernst–Planck equation, a modified Poisson–Boltzmann equation, and hydrodynamic calculations. The model includes four structural properties of the membrane: pore radius, pure water permeability, surface charge density and the ratio of effective membrane thickness to water content. The analysis demonstrates that the rejection and transport mechanisms are the same in the commercial and MacPF membranes with different contributions from each type of mechanism (convection, diffusion and electromigration). Solute rejection in NF membranes is determined primarily by a combination of steric and electrostatic effects. The selectivity of MacPF membranes is primarily determined by electrostatic effects with a significantly smaller contribution of steric effects compared to commercial membranes. Hence, these membranes have the ability to reject ions while remaining highly permeable to low molecular weight organics. Additionally, a new theoretical membrane design approach is presented. This design procedure potentially offers the optimization of NF membrane performance by tailoring the membrane structure and operating variables to the specific process, simultaneously. The procedure is validated at the laboratory scale.     

In Situ X-Ray Diffraction Study of the Initial Stages of Formation of MCM-41 in a Tubular Reactor

A continuous process for the synthesis of mesoporous silicates such as MCM-41 at room temperature has been achieved by employing a tubular reactor in which tetraethoxysilane was used as the silicate source (see schematic representation below). The formation of the hexagonal mesophase, which was monitored by using in situ XRD at different points of the tube, was completed in three minutes after mixing of the reactants. The product was stable to calcination, and N₂-sorption measurements confirmed the high surface area and narrow pore-size distribution.     

Novel Method for the Fabrication of a Charge‐Transfer Complex Crystal by Photoirradiation

A novel method for the fabrication of a charge‐transfer complex crystal was developed. Photoirradiation of a solution of TPP[Co(tbp)(CN)₂] and TPP[Co(Pc)(CN)₂] (tbp=tetrabenzoporphyrin, Pc=phthalocyanine, TPP=tetraphenylphosphonium) gave a molecular conducting crystal of a charge‐transfer complex TPP[Co(tbp)(CN)₂]₂, which was produced by the process in which the photoexcited electron in tbp was transferred from the LUMO of tbp to that of Pc.     

One‐Pot Synthesis of 3‐Acetyl‐2‐aryl‐3,4‐dihydroquinazolines from N‐[2‐(Azidomethyl)phenyl]benzamides Utilizing Intramolecular Aza‐Wittig Reaction

A new and convenient method for the preparation of 3,4‐dihydroquinazolines 5 with aryl and Ac groups at C(2) and N(3), respectively, has been developed. The key sequence is the formation of aza‐phosphorane intermediates by the reaction of N‐[2‐(azidomethyl)phenyl]benzamides 1 with Ph₃P, followed by intramolecular aza‐Wittig reaction and 3‐acetylation, which can be conducted in one‐pot.     

Fluorescence imaging of intracellular cadmium using a dual-excitation ratiometric chemosensor

We described here a coumarin-based dual-excitation ratiometric probe for cadmium, CadMQ. This fluorescence sensor has high quantum yields of 0.59 and 0.70 in the metal-free and Cd2+-bound forms, respectively, and has a dissociation constant of 0.16 nM for Cd2+. CadMQ is cell permeable and locates within the acidic compartments of the cells. We further show that CadMQ is a useful tool to ratiometrically probe the change in the intracellular Cd2+ levels with the use of two excited wavelengths.     

Sample Preparation Methods for Lipidomics Approaches Used in Studies of Obesity

Obesity is associated with alterations in the composition and amounts of lipids. Lipids have over 1.7 million representatives. Most lipid groups differ in composition, properties and chemical structure. These small molecules control various metabolic pathways, determine the metabolism of other compounds and are substrates for the syntheses of different derivatives. Recently, lipidomics has become an important branch of medical/clinical sciences similar to proteomics and genomics. Due to the much higher lipid accumulation in obese patients and many alterations in the compositions of various groups of lipids, the methods used for sample preparations for lipidomic studies of samples from obese subjects sometimes have to be modified. Appropriate sample preparation methods allow for the identification of a wide range of analytes by advanced analytical methods, including mass spectrometry. This is especially the case in studies with obese subjects, as the amounts of some lipids are much higher, others are present in trace amounts, and obese subjects have some specific alterations of the lipid profile. As a result, it is best to use a method previously tested on samples from obese subjects. However, most of these methods can be also used in healthy, nonobese subjects or patients with other dyslipidemias. This review is an overview of sample preparation methods for analysis as one of the major critical steps in the overall analytical procedure.     

Early stages of ZnS growth studied by stopped-flow UV absorption spectroscopy: effects of educt concentrations on the nanoparticle formation

The growth of ZnS nanoparticles by precipitation from supersaturated aqueous solution is studied by stopped-flow UV absorption spectroscopy. The average size, size distribution, and concentration of the particles are monitored within the sub-second time regime with a resolution of 1.28 ms. Particle growth at these early stages is governed by pronounced ripening. The UV absorption data strongly suggest that growth occurs by preferential adsorption of HS- anions relative to Zn(2+) or ZnOH(+) cations. Correspondingly, the initial sulfide concentration has a much more pronounced influence on the growth kinetics than the initial zinc concentration. These findings are verified by zeta-potential measurements which confirm that the particle surfaces are negatively charged under near-neutral pH conditions.     

4-(Pyrrolidinyl)methoxybenzoic acid derivatives as a potent, orally active VLA-4 antagonist

A novel series of benzoic acid derivatives as VLA-4 antagonists were synthesized. Optimization, focusing on activity and lipophilicity needed for cell permeability, resulted in the identification of 15b and 15e with good activity (IC50 = 1.6 nM each) and moderate lipophilicity (Log D = 2.0, 1.8). Furthermore, 15e demonstrated efficacy in murine asthma model by an oral dose of 30 mg/kg.