Role of reaction atmosphere in preparation of potassium tantalate through sol–gel method

Potassium tantalate (KT) thin films and powders of both K₂Ta₂O₆ (KT pyrochlore) and KTaO₃ (KT perovskite) structures were prepared by means of chemical solution deposition method using Si(111) with ZnO and MgO buffer layers as a substrate. The influence of reaction atmosphere on reaction pathway and phase composition for both KT powders, and KT thin films has been studied mainly by means of powder diffraction and infrared spectroscopy. When an oxygen flow instead of static air atmosphere has been used the process of pyrolysis in oxygen runs over much narrower temperature interval (200–300 °C), relatively to air atmosphere (200–600 °C) and almost no (in case of powders), or no (in case of thin films) pyrochlore intermediate phase has been detected in comparison with treatment in air, where the pyrochlore phase is stable at temperatures 500–600 °C (powders). KT perovskite phase starts to crystallize at temperatures 50° and 150 °C lower compared to air atmosphere in case of powders and thin films, respectively. Microstructure formed by near-columnar grains and small grains of equiaxed shape was observed in films treated in oxygen and air atmosphere, respectively.     

Discovery of Potential,Dual-Active Histamine H3 Receptor Ligands with Combined Antioxidant Properties

In an attempt to find new dual acting histamine H₃ receptor (H₃R) ligands, we designed a series of compounds, structurally based on previously described in our group, a highly active and selective human histamine H₃ receptor (hH₃R) ligand KSK63. As a result, 15 obtained compounds show moderate hH₃R affinity, the best being the compound 17 (hH₃R K_i = 518 nM). Docking to the histamine H₃R homology model revealed two possible binding modes, with key interactions retained in both cases. In an attempt to find possible dual acting ligands, selected compounds were tested for antioxidant properties. Compound 16 (hH₃R K_i = 592 nM) showed the strongest antioxidant properties at the concentration of 10⁻⁴ mol/L. It significantly reduced the amount of free radicals presenting 50–60% of ascorbic acid activity in the 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay, as well as showed antioxidative properties in the ferric reducing antioxidant power (FRAP) assay. Despite the yet unknown antioxidation mechanism and moderate hH₃R affinity, 16 (QD13) constitutes a starting point for the search of potential dual acting H₃R ligands-promising tools for the treatment of neurological disorders associated with increased neuronal oxidative stress.     

Enzymatically Extracted Apple Pectin Possesses Antioxidant and Antitumor Activity

The biological activity of apple pectin extracted conventionally or enzymatically using endo-xylanase and endo-cellulase, was tested in vitro. The analyses were performerd in tetraplicates and the statistical significance of the differences were assessed using ANOVA, Tukey post hoc and LSD (the least significant difference) tests. Multivariate regression analysis was applied to determine the structural components that have a crucial importance for antioxidant and antitumor properties of pectins. The pectins extracted by enzymes contained up to four times more ferulic acid and showed twice as great ability to neutralize free radicals and Fe(III) reduction. The antiradical potential positively correlated with phenols, fucose and rhamnose content. In the assays performed on HT-29 human adenocarcinoma and B16F10 melanoma cell cultures, the “green” pectins, contrary to acid isolated ones, exhibited remarkable anti-neoplastic potential while being nontoxic to nontransformed L929 cell line. The pectins in the dose of 1 mg/mL were capable of inhibiting adhesion (max 23.1%), proliferation (max 40.4%), invasion (max 76.9%) and anchorage-independent growth (max 90%) of HT-29 cells (significance level p < 0.001). These pectin preparations were slightly less active towards B16F10 cells. The enzyme-isolated apple pectins may be useful as a functional food additive and an ingredient of the ointment formulas for post-surgical melanoma treatment.     

Novel Method for the Fabrication of a Charge‐Transfer Complex Crystal by Photoirradiation

A novel method for the fabrication of a charge‐transfer complex crystal was developed. Photoirradiation of a solution of TPP[Co(tbp)(CN)₂] and TPP[Co(Pc)(CN)₂] (tbp=tetrabenzoporphyrin, Pc=phthalocyanine, TPP=tetraphenylphosphonium) gave a molecular conducting crystal of a charge‐transfer complex TPP[Co(tbp)(CN)₂]₂, which was produced by the process in which the photoexcited electron in tbp was transferred from the LUMO of tbp to that of Pc.     

Sample Preparation Methods for Lipidomics Approaches Used in Studies of Obesity

Obesity is associated with alterations in the composition and amounts of lipids. Lipids have over 1.7 million representatives. Most lipid groups differ in composition, properties and chemical structure. These small molecules control various metabolic pathways, determine the metabolism of other compounds and are substrates for the syntheses of different derivatives. Recently, lipidomics has become an important branch of medical/clinical sciences similar to proteomics and genomics. Due to the much higher lipid accumulation in obese patients and many alterations in the compositions of various groups of lipids, the methods used for sample preparations for lipidomic studies of samples from obese subjects sometimes have to be modified. Appropriate sample preparation methods allow for the identification of a wide range of analytes by advanced analytical methods, including mass spectrometry. This is especially the case in studies with obese subjects, as the amounts of some lipids are much higher, others are present in trace amounts, and obese subjects have some specific alterations of the lipid profile. As a result, it is best to use a method previously tested on samples from obese subjects. However, most of these methods can be also used in healthy, nonobese subjects or patients with other dyslipidemias. This review is an overview of sample preparation methods for analysis as one of the major critical steps in the overall analytical procedure.     

Thermochemical analysis of native point defects and substitutional carbon and boron in GaAs crystal growth

The phase extent of GaAs has been analyzed and compared with published phase diagrams as related to total and partial point defect equilibria including charged and uncharged Frenkel, Schottky, antisite defects and substitutional carbon and boron on both sublattices. The well-known transition between semiconducting and semi-insulating behaviour at 300 K as a function of melt stoichiometry in LEC crystals can be reproduced in our model in which complete equilibrium exists above, only electronic equilibrium below a freeze-in temperature of 1100 K. The corresponding model standard enthalpy of formation of neutral Schottky defects is 4.0 eV, of a pair of neutral uncorrelated antisite defects 3.8 eV, of neutral Ga Frenkel defects 4.1 eV and of neutral As Frenkel defects 3.6 eV. Defect reactions in cooling processes after crystal growth are discussed and shown to be quite different for crystals with high or low dislocation density. Semi-insulating behaviour requires the existence of carbon acceptors if dislocations provide internal sources and sinks for point defects. For ideal crystals carbon would not be necessary. The possible site distribution of C and B is analyzed in its dependence on temperature and chemical potential of As. Constitutional supercooling is negligible in LEC growth. Macrosegregation is severe if the As fraction in the melt deviates more than ±0.02 from the stoichiometric value 0.5.     

Superhydrophobic polyolefin surfaces: controlled micro- and nanostructures

Superhydrophobic polyolefin surfaces were prepared by simultaneous micro- and nanostructuring. Electropolished aluminum foil was microstructured with a micro working robot and then anodized in polyprotic acid. The surface microstructure can be tailored by adjusting the settings of the micro working robot and the nanostructure by adjusting the parameters of the anodization procedure. Surface structuring was done by injection molding where a microstructured anodized aluminum oxide mold insert was used to pattern the surfaces. Structuring had a marked effect on the contact angle between the injection-molded polyolefins and water. When the optimized microstructure was covered with nanostructure, the static contact angle between polypropylene and water obtained a value of about 165 degrees and the sliding angle decreased to about 2.5 degrees. The superhydrophobic state was achieved.