Scientific investigations of the Imperial Gates from the Petrindu wooden church,Salaj County,Romania

In order to preserve and restore the Imperial Gates from the Petrindu wooden church, Salaj County, Romania, (map location—latitude, longitude: 46.97, 23.19), the scientific investigation of the wooden support and painting materials (ground and pigments) was performed, employing Fourier‐transform infrared spectroscopy (FTIR), X‐ray fluorescence spectroscopy, and 3D scanning. FTIR spectroscopy offered information about the wooden degradation stage, whereas X‐ray fluorescence and FTIR spectroscopic methods were employed for structural painting materials characterization. The structural data can be correlated with the artistic, theological, and historical analysis of this religious patrimony object. After obtaining information about the wooden support and painting materials, the Imperial Gates were 3D digitized using state of the art laser scanning technology. The digital 3D model obtained was restored in a virtual environment and converted into an interactive 3D model that can be used for Romanian cultural heritage digital dissemination.     

Numerical predictions and experiments on the free-plate edge mode

In this paper, te edge mode variation is studied with three different methods: the reciprocal work method, already used by Torvik [J. Acoust. Soc. Am. 41 (1967) 346] to model this phenomenon, the S-parameter method and a finite element model that are applied for the first time to the study of the edge resonance. Moreover, laser probe measurements of the edge mode have also been performed and compared to the numerical predictions. The good agreement between the numerical predictions and the experimental data allows full understanding of the resonant phenomenon. The edge resonance is linked to the strong increase in amplitude of two complex Lamb waves, and the edge mode is proved to radiate into the plate as the first symmetrical Lamb mode S(0). Displacements at the edge and away from the edge have been computed and measured to evaluate the spatial and temporal behaviour of the edge mode. The dependence of the edge resonance frequency and amplitude on the Poisson coefficient has also been studied.     

Elastic scattering from a sapphire microsphere placed on a silica optical fiber coupler: Possible applications to biosensing

Elastic light scattering is performed in the original band of optical fiber communication at 1300 nm for a 500 μm sapphire microsphere placed on a silica optical fiber half coupler. The morphology dependent resonances (MDRs) are observed in the transverse magnetically (TM) polarized and transverse electrically (TE) polarized 0^° transmission and 90^° elastic scattering obtained from the sapphire microsphere. The TE and TM MDRs can be detected selectively with the use of a Glan polarizer. The TE and TM polarization selectivity provides the ability to select relative MDR to BG levels. The TM polarization provides higher MDR signal to background ratio (SBR) and is suitable for optical monitoring, biological sensing or any other optoelectronic application that requires a high resolution optical filter. The polar angular mode spacing of 0.36 nm of the resonances correlates well with the optical size of the sapphire microsphere. The autocorrelation of the 90^° elastic scattering spectra also shows peaks at 0.36 nm. The spectral linewidths of the resonances are on the order of 0.1 nm, which corresponds to quality factors on the order of 10⁴. A sapphire sphere with a radius of 500 μm and relative refractive index of 1.31, resonances will red-shift by 1.01 nm (0.077%). This shift is on the order of 10 linewidths, making sapphire biophotonic sensors an interesting alternative to silica biophotonic sensors.     

An Extremal Problem Arising in the Dynamics of Two-Phase Materials That Directly Reveals Information about the Internal Geometry

In two-phase materials, each phase having a non-local response in time, it has been found that for some driving fields the response somehow untangles at specific times, and allows one to directly infer useful information about the geometry of the material, such as the volume fractions of the phases. Motivated by this, and to obtain an algorithm for designing appropriate driving fields, we find approximate, measure independent, linear relations between the values that Markov functions take at a given set of possibly complex points, not belonging to the interval [-1,1] where the measure is supported. The problem is reduced to simply one of polynomial approximation of a given function on the interval [-1,1] and, to simplify the analysis, Chebyshev approximation is used. This allows one to obtain explicit estimates of the error of the approximation, in terms of the number of points and the minimum distance of the points to the interval [-1,1]. Assuming this minimum distance is bounded below by a number greater than 1/2, the error converges exponentially to zero as the number of points is increased. Approximate linear relations are also obtained that incorporate a set of moments of the measure. In the context of the motivating problem, the analysis also yields bounds on the response at any particular time for any driving field, and allows one to estimate the response at a given frequency using an appropriately designed driving field that effectively is turned on only for a fixed interval of time. The approximation extends directly to Markov-type functions with a positive semidefinite operator valued measure, and this has applications to determining the shape of an inclusion in a body from boundary flux measurements at a specific time, when the time-dependent boundary potentials are suitably tailored. © 2022 Wiley Periodicals, Inc.     

Thermostable Trioxane-Dioxolane Copolymers Obtained with Boron Trifluoride: Acrylonitrile Complex as Initiator

Trioxane was copolymerized with small amounts of dioxolane in benzene in the presence of a boron trifluoride:a crylonitrile complex as initiator. The kinetics of reactions was expressed in terms of topoenergetic principles. The copolymerizations had no induction periods and the maximum reaction rate was found proportional to the square of both the initiator and monomers concentrations. A zwitterionic mechanism is suggested for initiation. The activation energy for the system with 5% dioxolane was determined as 18.3 kcal/mol. The melting behavior of the copolymers is briefly discussed as a function of the dioxolane initial content, and is indicative of the amorphous-crystalline coupling phenomenon. The copolymers with ～ 5% dioxolane are thermostable in air up to 250%deg; and are recommended for practical purposes.     

Needle-free electrospinning of nanofibrillated cellulose and graphene nanoplatelets based sustainable poly (butylene succinate) nanofibers

Sustainable materials have slowly overtaken the nanofiber research field while the tailoring of their properties and the upscaling for industrial production are some of the major challenges. We report preparation of nanofibers that are bio-based and biodegradable prepared from poly (butylene succinate) (PBS) with the incorporation of nanofibrillated cellulose (NFC) and graphene nanoplatelets (GN). NFC and GN were combined as hybrid filler, which led to the improved morphological structure for electrospun nanofibers. A needleless approach was used for solution electrospinning fabrication of nanofiber mesh structures to promote application scalability. The polymer crystallization process was examined by differential scanning calorimetry (DSC), the thermal stability was evaluated by thermal gravimetric analysis (TGA), while the extensive investigation of the nanofibers structure was carried out with scanning electron microscopy (SEM) and atomic force microscopy (AFM). NFC and GN loadings were 0.5 and 1.0 wt %; while poly (ethylene glycol) (PEG) was employed as a compatibilizer to enhance fillers’ interaction within the polymer matrix. The interactions in the interface of the fillers and matrix components were studied by FTIR and Raman spectroscopies. The hybrid filler approach proved to be most suitable for consistent and high-quality nanofiber production. The obtained dense mesh-based structures could have foreseeable potential application in biomedical field like scaffolds for the tissue and bone recovery, while other applications could focus on filtration technologies and smart sensors.     

The Density Functional Theory Account of Interplaying Long-Range Exchange and Dispersion Effects in Supramolecular Assemblies of Aromatic Hydrocarbons with Spin

Aromatic hydrocarbons with fused benzene rings and regular triangular shapes, called n-triangulenes according to the number of rings on one edge, form groundstates with n-1 unpaired spins because of topological reasons. Here, we focus on methodological aspects emerging from the density functional theory (DFT) treatments of dimer models of the n = 2 triangulene (called also phenalenyl), observing that it poses interesting new problems to the issue of long-range corrections. Namely, the interaction comprises simultaneous spincoupling and van der Waals effects, i.e., a technical conjuncture not considered explicitly in the benchmarks calibrating long-range corrections for the DFT account of supramolecular systems. The academic side of considering dimer models for calculations and related analysis is well mirrored in experimental aspects, and synthetic literature revealed many compounds consisting of stacked phenalenyl cores, with intriguing properties, assignable to their long-range spin coupling. Thus, one may speculate that a thorough study assessing the performance of state-of-the-art DFT procedures has relevance for potential applications in spintronics based on organic compounds.     

Coordination polymers and a dinuclear complex constructed from zinc(II) ions and fluorescein: iodine adsorption and optical properties

Abstract

1-D coordination polymers, ¹_∞[Zn(fl)₂]·2EtOH and ¹_∞[Zn(fl)₂]·2MeOH, and a dinuclear complex, [{Zn(fl)₂}₂(dienpip)]·4H₂O·4EtOH (dienpip?= N,N′-bis(2-aminoethyl)piperazine), were obtained using Zn(II) ions and fluorescein anions (fl). Thermal analysis shows stability of the polymers after solvent removal up to more than 400?°C. Crystallization solvent molecules were removed under reduced pressure with the preservation of the polymeric structure, ¹_∞[Zn(fl)₂]. Desolvated crystals were exposed to I₂ vapors and the crystal structure determination by X-ray diffraction confirmed the presence of I₂ molecules in the channels generated in crystals by the metal-organic framework. The iodine content, evaluated by X-ray diffraction, corresponds to the overall formula ¹_∞[Zn(fl)₂]·0.3I₂. The optical properties of the coordination polymers and the dinuclear complex have been investigated.     

Fluorescent Flavin/PVP-Coated Silver Nanoparticles: Design and Biological Performance

A red-emitting fluorescent Riboflavin (RF)/Polyvinylpyrrolidone (PVP)-coated silver nanoparticles system, λ_em?=?527 nm, Φ?=?0.242, with a diameter of the metallic core of 27.33 nm and a zeta potential of ? 25.05 mV was prepared and investigated regarding its biological activity. We found that PVP has a key role in RF adsorption around the SNPs surface leading to an enhancement of antioxidant properties (～70%), low cytotoxicity (> 90% cell viability, at 50 µL/mL, after 48 h of incubation) as well as to an efficient process of its cellular uptake (～ 60%, after 24 h of incubation) in L929 cells. The results are relevant concerning the involvement of RF and its coenzymes forms in SNPs - based systems, in cellular respiration as well as for future studies as antioxidant marker system on tumoral cells for viewing and monitoring them, by cellular imaging.