Comparative study of carbon dioxide and nitrogen atmospheric effects on the chemical structure changes during pyrolysis of phenol-formaldehyde spheres

The effect of CO(2) atmosphere on the chemical structure changes of resol-type phenol-formaldehyde spheres during pyrolysis was investigated, in comparison with that of N(2) atmosphere, using FT-IR, TGA, and elemental analysis techniques. It was found that, in contrast to the expectation that CO(2) may act as an oxidizing agent at high temperature, it behaves very similar to N(2) during pyrolysis of PF spheres up to 700 degree C, but results in a somewhat different extent of some specific reactions. That is, although the reactions occurring up to 700 degree C were dominated by crosslinking and/or polyaromatization under both CO(2) and N(2) atmospheres, fewer alkyl-phenolic ether bonds were formed under CO(2) than under N(2). As a consequence, the samples carbonized under CO(2) at 700 degree C were found to have more pendant groups on the edge carbon atoms of carbon in the carbonized samples than those prepared under N(2) atmosphere.     

Repetitive determination of calcium ion and regeneration of a chromogenic reagent using chlorophosphonazo III and an ion exchanger in a circulatory flow injection system.

The spectrophotometric determination of Ca2+ with chlorophosphonazo III (CPN) has been carried out by a circulatory flow injection (FI) method. A cation-exchange mini-column for the on-line regeneration of the main reagent was incorporated in this FT system, allowing a repetitive determination of Ca2+. A solution of 4.0 x 10(-5) M CPN in a 0.05 M acetate buffer (pH 5.0) in a single reservoir (50 ml) was continuously circulated at a constant flow rate of 1.5 ml min(-1). Into the stream, an aliquot (20 microl) of a sample containing Ca2+ was quickly injected by means of a 6-way valve. The complex formed was monitored spectrophotometrically at 670 nm in the flow system. Then, the stream passed through a cation-exchange column, which was introduced after the flow-through cell. A successful ligand-exchange reaction of Ca2+ between the CPN reagent and a cation exchanger, as well as a simultaneous regeneration of the free reagent took place. The stream then returned to the reservoir. The regeneration and recycling of the CPN reagent allowed as many as 300 repetitive determinations of 2.5 mg l(-1) Ca2+ solutions with the same 50 ml circulating solution.     

Volumetric behavior and micelle formation of aqueous surfactant mixtures

A thermodynamic treatment of the volumetric behavior of surfactant mixtures in water have been developed on the basis of the thermodynamic treatment of mixed micelle by Motomura et al. Densities of aqueous solutions of mixtures of decyltrimethylammonium bromide (DeTAB) and dodecyltrimethylammonium bromide (DTAB) have been measured as a function of total molality at constant compositions. The apparent molar volumes of the mixtures have been derived from the density data and the mean partial molar volume of monomeric surfactant mixture V _t ^w , the molar volume of mixed micelle V^M/N _t ^M , the voluem of formation of mixed micelle _W ^M V, and the composition of surfactant in the mixed micelle have been evaluated. The V _t ^W , V^M/N _t ^M , and _W ^M V have been observed to depend on the composition. The linear dependence of V _t ^W and V^M/N _t ^M on the composition indicates that the mixing of DeTAB and DTAB is ideal both in the monomeric and micellar states. This has been confirmed further by the shape of the critical micelle concentration vs. composition curves.     

Clean analytical methodology for the determination of lead with Arsenazo III by cyclic flow-injection analysis

A clean analytical methodology, where the sample determined and the reagent used are both toxic, has been proposed. A cation exchange mini-column was incorporated after the flow-through cell for on-line regeneration of the main reagent and the accumulation of heavy metal ions. The method involves the spectrophotometric determination of lead with Arsenazo III, the accumulation of lead onto the cationic exchanger, and subsequent regeneration of the chromogenic reagent, which makes the system reversible and the reagents reusable. The developed method provides a satisfactory way to cut down on the toxic reagent consumption and the produced volume of waste, an important step towards the zero emissions research initiative concept. The excellent repeatability and reproducibility, and the simplicity of this method are well suited for continuous measurements. The method was successively applied to the assay of lead in high-octane gasoline.     

Cyclopolymerization. XIX. Effect of N-substituents on cyclopolymerizability of N-allylmethacrylamides

The effect of bulky N-substitutents of N-t-butyl- and N-phenyl-N-allylmethacrylamides (BAMA and PAMA, respectively) on their cyclopolymerizability was investigated. BAMA yielded an almost completely cyclized polymer while the degree of cyclization of poly (PAMA) was about 95%. The latter value indicates that the effect of phenyl group is comparable with that of methyl group, since N-methyl-N-allylmethacrylamide was reported to give a polymer with a degree of cyclization of 93%. Structural investigation on telomerization products of BAMA and PAMA permitted the assignment of the repeating cyclic units of these polymers to that of a five-membered ring. This structural characteristic was also supported by the observation of five-membered cyclized radicals on ESR measurements of these monomers. Rotation around amide C? N bonds of these monomers and related compounds studied by ¹³C-NMR was found to be strongly dependent on N-substitutents. The mechanism of the cyclization was discussed in terms of the structure of the ring formed and rotation around amide C? N bonds of these monomers. The reactivity of the methacryloyl and allyl groups involved in these monomers were compared based on the information obtained by structural investigation of polymers and telomerization products and by ESR studies. © 1993 John Wiley & Sons, Inc.     

Porous polystyrene microspheres having dimpled surface structures prepared within micellar assemblies of amphiphilic silica particles in water

Production of porous polystyrene microspheres having dimpled surface structures was demonstrated using amphiphilic and hydrophobic silica particles as structure-directing agents.     

Preferential partitioning of uncharged local anesthetics into the surface-adsorbed film

The surface tension and pH of aqueous solutions of three hydrochloric acid (HCl) - uncharged anesthetic (mepivacaine (MC), bupibacaine (BC) and dibucaine (DC)) mixtures were measured as a function of total molality and composition of local anesthetic in order to investigate the competitive surface-adsorption of uncharged and charged local anesthetics. The behavior of the surface tension versus total molality and pH versus total molality curves remarkably changed at the composition corresponding to an equimolar mixture. The pH measurements showed that uncharged and charged forms coexisted only at compositions more than the equimolar mixture. The partitioning quantities of respective uncharged and charged anesthetics into the surface-adsorbed film were estimated from their surface densities calculated thermodynamically. The greater quantity of uncharged anesthetics existed in the adsorbed film at the coexisting composition, that is, the uncharged anesthetics adsorbed more preferentially than charged ones. The relative ease with which uncharged anesthetics transferred into the surface-adsorbed film was proportional to the hydrophobicities and well correlated the anesthetic potencies. At compositions in the vicinity of physiological pH (ca. 7.4), the bulk solution is more abundant in charged anesthetics than uncharged ones, whereas the uncharged molecules is conversely more abundant in the surface region. The present results clearly imply that the surface-active molecule of local anesthetic in the physiological pH is the uncharged form and the partitioning is greatly dependent on the hydrophobicity among the anesthetics.     

Stereochemistry of the nickel-catalyzed cross-coupling reaction of Grignard reagents with olefinic halides: stereospecific versus nonstereospecific-stereoselective reactions

The nickel-catalyzed cross-coupling reactions of Grignard reagents with monohalo-olefins proceed stereospecifically, while with 1,2-dihaloethylenes they proceed nonstereo-specifically to form cis-olefins stereoselectively in many cases.     

Polyaddition reactions of bisethyleneureas and 1,1,3,3-diethyleneurea with polymethylene dimercaptans in LiCl-dimethylformamide

Polyaddition reactions of 1,1′-tetramethylenebis(3,3-ethyleneurea) (IIa), 1,1′-octamethylenebis(3,3-ethyleneurea) (IIb), 1,1′-p-phenylenebis(3,3-ethyleneurea) (IIc), 1,1′-(4,4′-diphenylmethane)bis(3,3-ethyleneurea) (IId) and 1,1,3,3-diethyleneurea (III) with polymethylene dimercaptans were investigated. 1,1′-Polymethylenebis(3,3-ethyleneureas) and polymethylene dimercaptans successfully reacted at 80–95°C. in the presence of triethylamine to give poly(urea sulfides) with intrinsic viscosities up to 1.1 in about 90% yield when dimethylformamide, dimethylacetamide, or N-methyl-2-pyrrolidone containing lithium chloride as a solvent were used. The other ethyleneureas, however, failed to give high molecular weight polymers.