Gas separation membranes plasma-polymerized from perfluoromethylcyclohexane/methane mixture

Plasma-polymerizations of perfluoromethylcyclohexane (PFMCH)/methane (CH₄) mixture were investigated by elemental analysis, infrared spectroscopy, and ESCA; and gas transport characteristics of the plasma-films formed were studied. The addition of CH₄ molecules to PFMCH accelerated defluorination to form plasma-polymers poor in fluorocarbon units. The surface energy of the plasma-polymers increased with increasing the CH₄ concentration. The oxygen and nitrogen permeation coefficients (P_O2 and P_N2) and the P_O2/P_N2 ratio for the polymer films formed from the PFMCH/CH₄ mixture depended on the CH₄ concentration. The small CH₄ addition was effective in improvement of the P_O2 value and of the P_O2/P_N2 ratio, but the much addition was ineffective. The oxygen transport through the plasma-polymers was discussed.     

Heat capacity and dual spin-transitions in the crossover system [Fe(2-pic)3]Cl2·EtOH

The heat capacity of [Fe(2-pic)₃]Cl₂·C₂H₅OH Crystal (2-pic: 2-picolylamine) has been measured with an adiabatic calorimeter between 13 and 315 K. Two phase transitions centered at 114.04 and 122.21 K were observed. This finding accords with recent prediction of possible existence of two-step spin-conversion (H. Köppen et al., Chem. Phys. Lett., 91 (1982) 348). The total transition enthalpy and entropy amounted to ΔH = 6.14 kJ mol^?1 and ΔS = 50.59 J K^?1 mol^?1. The transition entropy consists of the magnetic contribution (13.38 J K^?1 mol^?1), the orientational order-disorder phenomenon of the solvate ethanol molecule (8.97) and the change in the phonon system, in particular the change in stretching and deformation vibrations of the metal-ligand (28.24).     

Effect of pressure on the thermotropic phase behavior of surfactant assemblies in water

The temperature (T)—pressure (P) phase diagrams of aqueous solutions of a homologous series of cationic surfactants, tetradecyl- (C14TAB), hexadecyl- (C16TAB), and octadecyltrimethylammonium bromide (C18TAB), have been determined by observing the sudden change of the transmittance accompanying the phase transition under high pressure up to 160 MPa. Regarding three kinds of phase transitions which have been previously assigned by the differential scanning calorimetry (DSC) (S. Kaneshina and M. Yamanaka, J. Colloid Interface Sci.131, 493, 1989), all the transition temperatures were linearly elevated by applying pressure. The volume changes associated with the transitions were estimated from the Clapeyron—Clausius equation by using the values of the T—P slopes on the phase diagrams and of the transition entropies taken from the DSC study. A chemical potential vs pressure profile, of which slope reflects the partial molar volume, among the states of surfactant assemblies, i.e., micelle, gel, and coagel, was drawn schematically on the basis of the transition volumes. The phase boundary between the coagel phase and the micellar solution should be the critical solution line of the surfactant, representing the pressure dependence on the Krafft temperature. In the C18TAB-water system, the phase boundary line between the metastable gel and the supercooled micelle had a break point at 45 MPa, suggesting the existence of a new pressure-induced mesophase above 45 MPa. The metastable gel phase of C14TAB disappeared in the pressure range up to 160 MPa.     

A glucose electrode based on carbon paste chemically modified with a ferrocene-containing siloxane polymer and glucose oxidase,coated with a poly(ester-sulfonic acid) cation-exchanger

A carbon-paste chemically modified with glucose oxidase and a ferrocene-containing siloxane polymer was further modified by coating the electrode surface with a poly(ester-sulfonic acid) cation-exchanger, Eastman AQ-29D. The polymer is obtained as a homogeneous aqueous dispersion at pH 5–6; when dried, the polymer coating is not water-soluble. The coating was shown not to be detrimental to the enzyme activity but to prevent electrochemically active anionic interferents such as ascorbate and urate from reaching the electrode surface. The polymer coating also prevented glucose oxidase from leaking out of the carbon paste into the contacting solution and protected the electrode surface from fouling agents present in urine and bovine serum albumin. Uncoated electrodes lost some 10-2-15% of their original response to glucose after storage in buffer for three weeks whereas the response of the coated electrodes remained constant. Calibration curves for glucose were strictly linear up to about 5 mM for uncoated and up to 20 mM for coated electrodes. The response current to glucose was not decreased after coating.     

Thermal [2+2] cycloaddition of allenynes: easy construction of bicyclo[6.2.0]deca-1,8-dienes, bicyclo[5.2.0]nona-1,7-dienes, and bicyclo[4.2.0]octa-1,6-dienes

The simple refluxing of allenynes, having a phenylsulfonyl functionality on the allenyl group, in xylene (or mesitylene) without microwave irradiation resulted in the efficient formation of bicyclo[5.2.0]nona-1,7-dienes and bicyclo[4.2.0]octa-1,6-dienes in high yields. This method was shown to be successfully applicable to the first construction of bicyclo[6.2.0]deca-1,8-dienes. Construction of the corresponding oxa- and azabicyclo[m.2.0] frameworks could also be attained. This thermal ring-closing reaction involves the formal [2+2] cycloaddition in which the distal double bond of an allenyl moiety exclusively served as one of the pi-components regardless of the position of the phenysulfonyl functionality on the allenyl moiety.     

Label-free detection of protein-protein interactions at the GaAs/water interface through surface infrared spectroscopy: discrimination between specific and nonspecific interactions by using secondary structure analysis

Here, we propose a label-free detection of protein-protein interactions that enables simultaneous qualitative analysis of target proteins by using Fourier transform infrared (FTIR) absorption spectroscopy in multiple internal reflection geometry (MIR-FTIR). Using this method, the target proteins were detected based on the peak height of the amide I and amide II bands, while discrimination of specific and nonspecific signals is made based on the secondary structure of the analytes, which is determined through second-derivative analysis of the amide I band. As a model system, an antigen peptide was immobilized on the surface of GaAs, which was transparent to mid-infrared light, and the interaction with its antibody was examined in aqueous media. We demonstrated that the binding of the antibody to the antigen immobilized on a GaAs surface selectively gave rise to beta-sheet amide I vibrations (1639 and 1690 cm-1), while no structurally related signals were induced by nonspecifically adsorbed proteins. The peak height of the beta-peak (1639 cm-1) in the amide I band linearly increased with the antiserum concentration as well as that of the amide II band. The detection limit (S/N = 3) was a 1:36 000 dilution for the amide I signal. In addition, through the use of surface-sensitive MIR-FTIR, the present sensor selectively detected the antigen-antibody interactions at the surfaces without being affected by the presence of bulk species, enabling rapid and wash-free detection. Our method provides not only rapid label-free detection of protein-protein interactions but a more accurate discrimination between specific and nonspecific interactions through the use of the secondary structure of the target proteins as a measure for the specific signals.     

Spectroscopic Properties of Amine‐substituted Analogues of Firefly Luciferin and Oxyluciferin

Spectroscopic and photophysical properties of firefly luciferin and oxyluciferin analogues with an amine substituent (NH₂, NHMe and NMe₂) at the C6' position were studied based on absorption and fluorescence measurements. Their π‐electronic properties were investigated by DFT and TD‐DFT calculations. These compounds showed fluorescence solvatochromism with good quantum yields. An increase in the electron‐donating strength of the substituent led to the bathochromic shift of the fluorescence maximum. The fluorescence maxima of the luciferin analogues and the corresponding oxyluciferin analogues in a solvent were well correlated with each other. Based on the obtained data, the polarity of a luciferase active site was explained. As a result, the maximum wavelength of bioluminescence for a luciferin analogue was readily predicted by measuring the photoluminescence of the luciferin analogue in place of that of the corresponding oxyluciferin analogue.     

Purines. LII. Synthesis and biological evaluation of 8-methylguanine 7-oxide and its 9-arylmethyl derivatives.

The synthesis of 8-methylguanine 7-oxide (3) was accomplished via a "phenacylamine route", which started from condensation of alpha-(4-methoxybenzylamino)propiophenone (6), prepared by coupling of alpha-bromopropiophenone (4) and 4-methoxybenzylamine (5), with 2-amino-6-chloro-5-nitro-4(3H)-pyrimidinone (7) and proceeded through cyclization of the resulting phenacylaminopyrimidinone (8) and removal of the 4-methoxybenzyl group. The N-oxide 3 and its 9-arylmethyl derivatives 9 and 11 showed only very weak antileukemic activity and no antimicrobial activity.     

Determination of the double-bond position in hexadecenols by mass spectrometry without prior chemical modification

Fourteen isomers of chemically unmodified hexadecenol were analysed by two types of quadrupole mass spectrometer, coupled with a gas chromatograph, for the location of the double-bond position. A series of spectra were interpreted in terms of mass spectral patterns on a fuzzy classification, in which the intensity ratios of six diagnostic pairs of the predominant ions were preferred in devising similarity indices. The accuracy of the method in the location of double-bond position was confirmed by testing with other series of spectra.