Influence of Catalyses on the Preparation of YVO<Subscript>4</Subscript>:Eu<Superscript>3+</Superscript> Phosphors by the Sol–gel Methodology

YVO(4):Eu(3+) phosphors have been prepared by the hydrolytic sol-gel methodology, with and without alkaline catalyst. The solid powder was obtained by reaction between yttrium III chloride and vanadium alkoxides; the europium III chloride was used as structural probe. The powder was treated at 100, 400, 600, or 800 °C for 4 h. The samples were characterized by X-ray diffraction, thermal analysis, and photoluminescence. The XRD patterns revealed YVO(4) crystalline phase formation for the sample prepared without the catalyst and heat-treated at 600 °C and for the sample prepared in the presence of ammonium as catalyst and heat-treated at 100 °C. The average nanosized crystallites were estimated by the Scherrer equation. The sample which was produced via alkaline catalysis underwent weight loss in two stages, at 100 and 400 °C, whereas the sample obtained without catalyst presented four stages of weight loss, at 150, 250, 400, and 650 °C. The excitation spectra of the samples treated at different temperatures displayed the charge transfer band (CTB) at 320 nm. PL data of all the samples revealed the characteristic transition bands arising from the (5)D(0) → (5)F(J) (J = 0, 1, 2, 3, and 4) manifolds under maximum excitation at 320, 394, and 466 nm in all cases. The (5)D(0) → (7)F(2) transition often dominates the emission spectra, indicating that the Eu(3+) ion occupies a site without inversion center. The long lifetime suggests that the matrix can be applied as phosphors. In conclusion, the sol-gel methodology is a very efficient approach for the production of phosphors at low temperature.     

Synthesis,alkali metal picrate extraction,and alkali metal cation binding selectivities of some new cage‐annulated polyoxamacrocyclic crown ethers

Five new cage‐annulated crown ethers, i.e., 4a, 4b, 6b, 11a, and 11b, have been synthesized and their respective alkali metal picrate extraction profiles along with that of a previously synthesized host molecule, 6a, have been obtained. These results are compared with the corresponding results obtained for electrospray ionization mass spectrometric (ESI‐MS) measurements of relative binding selectivities displayed by the same hosts toward a series of alkali metal chlorides. Among the crown‐5 hosts studied, 6a displays enhanced avidity toward complexation with K⁺ picrate in liquid‐liquid extraction experiments. Among the three crown‐6 hosts, 4b proved to be the best alkali metal picrate extractant and displayed significant levels of avidity toward complexation with the larger alkali metal cations (i.e., K⁺, Rb⁺, and Cs⁺). The trends in the picrate extraction and the ESI‐MS results obtained herein show several notable similarities and some differences. The similarities generally stem from size‐selective binding properties that are intrinsic to the different cavity sizes of the cage‐annulated macrocycles, whereas the differences reflect the important influence of solvation effects on the binding properties of the macrocycles.     

Tetrakis­(diethyl­amino)­phospho­nium bromide hemihydrate

The structure of the title compound, C₁₆H₄₀N₄P⁺·Br^?·0.5H₂O or [P{N(C₂H₅)₂}₄]Br·0.5H₂O, at 130 K has Z′ = 4 and is ionic, with Br not bonded to P. The P atoms are tetrahedral, with P—N distances in the range 1.628 (2)–1.6400 (19) Å. The N atoms are approximately planar. The water mol­ecules form cyclic hydrogen‐bonded [(H₂O)₂Br₂]^2? units about inversion centers, with O?Br distances in the range 3.425 (2)–3.611 (3) Å.     

Computational Studies of RAFT Polymerization–Mechanistic Insights and Practical Applications

Summary: Computational chemistry is a valuable complement to experiments in the study of polymerization processes. This article reviews the contribution of computational chemistry to understanding the kinetics and mechanism of reversible addition fragmentation chain transfer (RAFT) polymerization. Current computational techniques are appraised, showing that barriers and enthalpies can now be calculated with kcal accuracy. The utility of computational data is then demonstrated by showing how the calculated barriers and enthalpies enable appropriate kinetic models to be chosen for RAFT. Further insights are provided by a systematic analysis of structure‐reactivity trends. The development of the first computer‐designed RAFT agent illustrates the practical utility of these investigations.

     

Variational Problems¶on Multiply Connected Thin Strips I:¶Basic Estimates and Convergence¶of the Laplacian Spectrum

Let M be a planar embedded graph whose arcs meet transversally at the vertices. Let ?(?) be a strip-shaped domain around M, of width ? except in a neighborhood of the singular points. Assume that the boundary of ?(?) is smooth. We define comparison operators between functions on ?(?) and on M, and we derive energy estimates for the compared functions. We define a Laplace operator on M which is in a certain sense the limit of the Laplace operator on ?(?) with Neumann boundary conditions. In particular, we show that the p-th eigenvalue of the Laplacian on ?(?) converges to the p-th eigenvalue of the Laplacian on M as ? tends to 0. A similar result holds for the magnetic Schrödinger operator.     

Selective separations by reactive ion exchange: Part 4. Preconcentration of cadmium and zinc by in situ precipitation as hexacyanoferrate(II) salts on gel and macroporous ion-exchange resins

The in situ precipitation of traces of cadmium(II) and zinc(II) ions as hexacyanoferrates from aqueous matrices was studied on conventional polystyrene gel and macroporous cation- and anion-exchange resins. Coprecipitation with each other or with copper(II) ions present in binary cation resins or in solution, and the influence of added nonprecipitating ions of the same charge type such as magnesium(II) were investigated. Microporous (gel) cation exchangers gave reasonable recoveries and macroporous cation exchangers gave very good recoveries; but macroporous anion exchangers performed best, suggesting macroporous hexacyanoferrate(II) resin as an ideal phase for collection/preconcentration of traces of Cu²⁺, Cd²⁺, Zn²⁺, and possibly Co²⁺, Ni²⁺, and Pb²⁺ from waters. As expected, very low yields were obtained with conventional anion exchange resin in the hexacyanoferrate form. Uniform distribution of Cu²⁺, Zn²⁺, and Cd²⁺ over macroporous anion-exchange resin phases were established by means of electron probe scans and taken as evidence for the formation of a uniform, well-developed precipitate layer covering the entire resin particle surface.     

A class of supported membranes: formation of fluid phospholipid bilayers on photonic band gap colloidal crystals

We report the formation of a new class of supported membranes consisting of a fluid phospholipid bilayer coupled directly to a broadly tunable colloidal crystal with a well-defined photonic band gap. For nanoscale colloidal crystals exhibiting a band gap at the optical frequencies, substrate-induced vesicle fusion gives rise to a surface bilayer riding onto the crystal surface. The bilayer is two-dimensionally continuous, spanning multiple beads with lateral mobilities which reflect the coupling between the bilayer topography and the curvature of the supporting colloidal surface. In contrast, the spreading of vesicles on micrometer scale colloidal crystals results in the formation of bilayers wrapping individual colloidal beads. We show that simple UV photolithography of colloidal crystals produces binary patterns of crystal wettabilities, photonic stopbands, and corresponding patterns of lipid mono- and bilayer morphologies. We envisage that these approaches will be exploitable for the development of optical transduction assays and microarrays for many membrane-mediated processes, including transport and receptor-ligand interactions.     

Polymer-supported nitroxyl radical catalyst for selective aerobic oxidation of primary alcohols to aldehydes

PS-TEMPO, a polymer-supported 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO), was successfully applied as a recyclable, active and selective catalyst for the oxidation of primary aliphatic and benzylic alcohols to aldehydes by molecular oxygen in the presence of Co(NO3)2 and Mn(NO3)2 as co-catalysts.     

Development and evaluation of a nano-electrospray ionisation source for atmospheric pressure ion mobility spectrometry

A nano-electrospray ionisation source has been designed and constructed for a high temperature ion mobility spectrometer. The drift cell was modified by replacement of the 63Ni atmospheric pressure chemical ionisation source with a tube lens/desolvation region and operated using commercial nano-electrospray capillaries. Ions were introduced into the drift region via a Bradbury-Nielson gate (pulse width 50 micros, repetition period 20 ms). A unidirectional flow of nitrogen was used as the drift gas at temperatures in the range 100-150 degrees C to aid desolvation. The performance of the nano-electrospray ion source has been demonstrated for analytes including crown ethers, amino acids and peptides. Reduced mobilities determined by nano-ESI were consistent with those reported using a 63Ni ion source.     

Highly aminated mesoporous silica nanoparticles with cubic pore structure

Mesoporous silica with cubic symmetry has attracted interest from researchers for some time. Here, we present the room temperature synthesis of mesoporous silica nanoparticles possessing cubic Pm3?n symmetry with very high molar ratios (>50%) of 3-aminopropyl triethoxysilane. The synthesis is robust allowing, for example, co-condensation of organic dyes without loss of structure. By means of pore expander molecules, the pore size can be enlarged from 2.7 to 5 nm, while particle size decreases. Adding pore expander and co-condensing fluorescent dyes in the same synthesis reduces average particle size further down to 100 nm. After PEGylation, such fluorescent aminated mesoporous silica nanoparticles are spontaneously taken up by cells as demonstrated by fluorescence microscopy.