Automatic sugar analysis in the beet industry. Part I: Parameter optimization of a reversed phase HPLC carbohydrate determination

An evaluation of the most commonly used HPLC system (reversed phase octadecyl sillica gel) was undertaken in order to determine the level of certain carbohydrates in molasses produced in the refining of sugar beet. Chromatographic parameters and purification operations prior to analysis are discussed in order to develop an analytical method permitting automation of sugar determination. A Zorbax ODS column (250 × 9.4 mm), water elution, and light scattering detection allow easy determination of glucose + fructose, sucrose, and raffinose in molasses using an internal standard (maltose).     

Evaluation of a retention model in comprehensive two-dimensional gas chromatography

Modeling the retention in comprehensive two-dimensional gas chromatography (GC x GC) was achieved using retention indices obtained in conventional GC. Predicted results were compared with experimental data obtained in the two-dimensional separation of a synthetic hydrocarbon mixture. This proved to be helpful in optimizing the operating conditions of GC x GC separation of a complex petroleum sample and in identifying chemical families.     

Direct probing of zwitterion formation in unsolvated peptides

Molecular beam electric deflection measurements have been used to determine electric susceptibilities for small unsolvated alanine-based peptides. The electric susceptibility provides information about the charge distribution within the peptide and can be used to distinguish between zwitterionic and canonical forms. Measured electric susceptibilities for WAn peptides (n = 1-5) are similar to those for capped Ac-WAn-NH2 peptides (which cannot form zwitterions). Susceptibilities calculated using a simulated tempering-based approach are substantially larger for the zwitterionic form than for the canonical form. The measured susceptibilities are in good agreement with those calculated for the canonical form. For the larger peptides, the lowest potential energy structure found in the simulations is hairpin-like, while the lowest free energy structure found at room temperature is extended. The zwitterionic form is constrained by intramolecular interactions which make it entropically unfavorable.     

Synthèse partielle et propriétés oncostatiques des pseudo-tubulosines,analogues de l'émétine et de la tubulosine

Partial Synthesis and Oncostatic Properties of Pseudotubulosines, Analogues of Emetine and Tubulosine Pseudotubulosines, structural analogues of emetine and tubulosine, have been synthesized by either Pictet-Spengler or Bischler-Napieralski condensation from dihydrocorynantheal or corynantheidal. Spectral data, cytotoxic and oncostatic properties of these new alkaloids are described.     

Sterols with Cyclopropane-Containing Side Chains: Synthesis and Acid Isomerization

To test the eventual involvement of sterols with a cyclopropane containing side chain in bio-methylation processes, 24,25-methanocholest-5-en-3β-ol ( 5 ) and 24,25-methano-26-methylcholest-5-en-3β-ol ( 6 ) were synthesized. Together with the naturally occurring cyclopropane petrosterol ( 1 ), they were submitted to acid isomerization to provide chemical models for some of their potential metabolites.     

New polycyclic diamine scaffolds from dimerization of 3-alkyl-1,4-dihydropyridines in acidic medium

[reaction: see text] 3-Alkyl-1,4-dihydropyridines dimerize in acidic medium, at low temperature, to give polycyclic imminium salts derivatives that were reduced to afford new polycyclic diamine scaffolds. The reaction can be extended to enantiopure series starting from R-(+)- or S-(-)-1-phenylethylamine. Long exposure of the polycyclic imminium salt intermediates to air moisture at 20 degrees C resulted in formation of new amide derivatives. This is probably due to the addition of water followed by an intramolecular oxido-reduction process.     

Structural, textural, and electronic properties of a nanosized mesoporous ZnxTi1-xO2-) solid solution prepared by a supercritical drying route

Mesoporous nanosized TiO2 and Zn(x)Ti(1-x)O(2-x) solid solution having a Zn content below 10 mol % with a particles size between 13 and 17 nm are prepared by a template-free sol-gel method followed by high-temperature supercritical drying in 2-propanol. The structural, textural, and electronic properties of the obtained nanomaterials are methodically investigated by using XRD, SEM, TEM, ED, HREM, EDX, ICP-OES, N(2) adsorption-desorption, Raman spectroscopy, and diffuse reflectance UV-vis spectroscopy. It is shown that the proposed synthesis technique leads to the formation of a Zn(x)Ti(1-x)O(2-x) solid solution based on the anatase crystal structure rather than a two-phase sample. High-resolution electron microscopy and electron diffraction indicate that the distribution of zinc atoms over the anatase structure does not lead to a considerable deformation of the crystal structure.     

Implementation of the finite field perturbation method in the CRYSTAL program for calculating the dielectric constant of periodic systems

The finite field approach has been implemented in the periodic ab initio CRYSTAL program and been used for calculating the dielectric constants of crystalline LiF and MgO (FCC structure) and BeO (wurtzite structure). To maintain the periodicity along the applied field direction, a "sawtooth" potential is used in conjunction with a supercell scheme. Supercells four to five times longer than the primitive cell in the direction of the applied field provide well-converged results. The influence of the computational parameters is discussed. An alternative scheme has also been implemented, for inner check, that consists of applying a static electric field to a slab of increasing thickness in the direction orthogonal to the surface; the dielectric response at the center of the slab is shown to converge rapidly to the bulk value evaluated with the sawtooth field. The method is accurate and permits the determination of nonlinear corrections to the dielectric constant. When used in conjunction with the local density approximation (LDA) scheme, it provides for the dielectric constant of the three above-mentioned compounds values close to those recently obtained with a time-dependent density functional theory approach.     

Indirect determination of the sum of chelons in drinking- and ground-waters by anodic stripping voltammetry

The complexing ligand EDTA can be determined as its complex with bismuth by indirect anodic stripping voltammetry down to 0.1 μg/L without a concentration step. Interfering copper and excess bismuth have to be removed by cation exchange, although in presence of these metals EDTA can be determined down to 0.5 μg/L only. If NTA, EDTA, and DTPA are present simultaneously, the accumulation curves for the corresponding bismuth-complexes can overlap, preventing a separate determination of the three chelons. Due to the interaction of NTA and DTPA with soil normally only EDTA is present in ground-waters. Similarly, EDTA also dominates in surface-waters. Thus it seems to be sufficient to determine the sum of the three chelons as EDTA (index of bismuth-complexation) using suitable electrochemical conditions.