Non-destructive determination of spontaneously fissioning nuclides by neutron coincidence counting using multichannel time spectroscopy

A non-destructive method for determining the amount of actinoids has been developed. The method is based on thermal neutron coincidence counting and employs a selective detection of neutrons resulting from the spontaneous fission of actinoids. The detection system is described in detail and the measurement results of²⁴⁴Cm as an example are presented. The results show that the measured fission rate of²⁴⁴Cm is consistent with the fission rate calculated from ENDF/B-V data and that the amount of²⁴⁴Cm can be determined within about 5% accuracy even in the presence of a large amount of actinoids, for example, up to 2.6·10⁶, 3.6·10⁴, or 1.6·10³ times in the mass ratio of²³⁹Pu,²⁴¹Am, or²⁴⁰Pu to²⁴⁴Cm, respectively.     

Tribological properties of ormosil coatings

Transparent plastics are not scratch resistant. The damage leads to a loss of optical properties. Coatings prepared using either tetraethoxysilane or colloidal silica particles embedded in glymo is a way to avoid these disadvantages. Tribological experiments are carried out to better understand the surface modification due to a sliding friction. It is shown that the wear track is not directly related to usual mechanical properties such as Young's modulus and the hardness of the coating. The different stages leading to material loss are discussed in term of particle removal and debris circulation (accumulation or elimination) through the friction track. The mechanical properties of the film combined with the film to substrate adhesion are expected to play an important role as it can be deduced from results obtained as a function of the coating composition.     

Membrane ion-exchange chromatography for process-scale antibody purification

Microemulsion electrokinetic chromatography (MEEKC) was evaluated as a screening tool for the indirect measurement of octanol–water partition coefficients (log P_o/w) of pesticide compounds. Over 80 pesticide compounds representing a variety of structural characteristics were studied, and good correlation of log P_o/w with the logarithm of the retention factor was found. The microemulsion system studied allowed the separation of compounds in the log P_o/w range of −1 to 7. In addition, a smaller set of simple organic molecules that vary in structural features was evaluated and compared to the pesticide log P_o/w calibration. The pesticide and simple organic molecule log P_o/w calibration lines were statistically similar. This suggests that a universal set of standard compounds may be employed for the log P_o/w calibration to provide measurements for a variety of compounds with good accuracy.     

One-carbon homologation of carboxylic acids via BtCH(2)TMS: a safe alternative to the Arndt--Eistert reaction

Carboxylic acids are converted into the corresponding homologated acids or esters, using easily available 1-(trimethylsilylmethyl)benzotriazole (1) as a one-carbon synthon. The effectiveness of the reaction has been investigated on six aryl and seven alkyl carboxylic acids.     

Synthesis and metal-ion binding properties of monoazathiacrown ethers

Synthetic procedures for monoazathiacrown ethers were explored, and monoazatrithia-12-crown-4, monoazatetrathia-15-crown-5, and monoazapentathia-18-crown-6 were obtained in moderate yields by the reaction of bis(2-chloroethyl)amine with the appropriate dithiols in the presence of lithium hydroxide in THF. To evaluate metal-ion binding properties of the monoazathiacrown ethers by solvent extraction, lipophilic dodecyl and dodecanoyl groups were incorporated onto the monoazathiacrown ethers. The solvent extraction experiments suggested that monoazathiacrown ethers have Ag(+) and Hg(2+) selectivities and that the relative selectivity between Ag(+) and Hg(2+) depends on their nitrogen atom properties and numbers of sulfur atoms reflecting the respective affinities of nitrogen and sulfur atoms to Hg(2+) and Ag(+). An interesting ability to bind Mg(2+) was observed in the case of N-dodecyl monoazatrithia-12-crown-4.     

Analysis of combinatorial chemistry samples by micellar electrokinetic chromatography

A micellar electrokinetic chromatography (MEKC) method has been developed that can evaluate the purity of samples generated in combinatorial chemistry libraries. This method uses an open tube capillary (27 cm x 50 microm) along with a run buffer composed of sodium dodecyl sulfate (SDS), hydroxypropyl-beta-cyclodextrin, and sodium tetraborate coupled with UV detection. Neutral compounds and compounds that were insoluble in aqueous buffers could be analyzed under these conditions in approximately 3 min. The concentration of SDS and the concentration of hydroxypropyl-beta-cyclodextrin effected the separation. The affect on selectivity resulting from the addition of an organic modifier to the run buffer was examined. The low background absorbency of the run buffer made for easy detection of compounds that absorbed at low UV wavelengths. The quick analysis time made this suitable for analysis of combinatorial chemistry samples.     

Analysis of acyclovir by high performance capillary electrophoresis with on-column amperometric detection

The separation of acyclovir (ACV) by high performance capillary electrophoresis (HPCE) with on-column amperometric detection using alpha-amino-5-mercapto-3,4-dithiazole (AMD) as internal standard is described. The calibration line was linear in the range of 0.5-20 mg/L of ACV. The detection limit was 0.15 mg/L of ACV. Its recovery ranged from 98 to 101% with relative standard deviations (RSDs) from 1.9 to 3.2% (n = 5). This method was successfully used for determining ACV in some pharmaceuticals and human urine. Comparable results with HPCE with ultraviolet (UV) detection and amperometric detection were obtained.