The effect of nanoparticle shape on polymer‐nanocomposite rheology and tensile strength

Nanoparticles can influence the properties of polymer materials by a variety of mechanisms. With fullerene, carbon nanotube, and clay or graphene sheet nanocomposites in mind, we investigate how particle shape influences the melt shear viscosity η and the tensile strength τ, which we determine via molecular dynamics simulations. Our simulations of compact (icosahedral), tube or rod‐like, and sheet‐like model nanoparticles, all at a volume fraction ? ≈ 0.05, indicate an order of magnitude increase in the viscosity η relative to the pure melt. This finding evidently can not be explained by continuum hydrodynamics and we provide evidence that the η increase in our model nanocomposites has its origin in chain bridging between the nanoparticles. We find that this increase is the largest for the rod‐like nanoparticles and least for the sheet‐like nanoparticles. Curiously, the enhancements of η and τ exhibit opposite trends with increasing chain length N and with particle shape anisotropy. Evidently, the concept of bridging chains alone cannot account for the increase in τ and we suggest that the deformability or flexibility of the sheet nanoparticles contributes to nanocomposite strength and toughness by reducing the relative value of the Poisson ratio of the composite. The molecular dynamics simulations in the present work focus on the reference case where the modification of the melt structure associated with glass‐formation and entanglement interactions should not be an issue. Since many applications require good particle dispersion, we also focus on the case where the polymer‐particle interactions favor nanoparticle dispersion. Our simulations point to a substantial contribution of nanoparticle shape to both mechanical and processing properties of polymer nanocomposites. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1882–1897, 2007     

Gas solubility of carbon dioxide in poly(lactic acid) at high pressures: Thermal treatment effect

The sorption of carbon dioxide in glassy Poly(lactic acid) (PLA) films was studied by quartz crystal microbalance (QCM) at high pressures. Two thermal treatments, melted and quenched, were performed in PLA with two different L:D contents, 80:20 and 98:2, films and compared with a third thermal protocol, annealed, and used in a previous work. The results obtained show that for pressures higher than 2 MPa, the carbon dioxide solubility is larger in PLA 80:20 than in PLA 98:2, indicating that the L:D plays a dominant role on this property. The thermal treatments only affect the gas solubility in PLA 98:2. Sorption isotherms at temperatures 303, 313, and 323 K, below the glass transition temperature of the polymer, and pressures up to 5 MPa were measured and analyzed with three different models, the dual‐mode sorption model, the Flory–Huggins equation, and a modified dual‐mode sorption model where the Henry's law term was substituted by the Flory–Huggins equation. This last model performs especially well for CO₂ in PLA 80:20, due to the convex upward curvature of the solubility isotherms for that system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 616–625, 2007     

Applications of fast atom bombardment mass spectrometry (FAB MS) to organometallic and coordination chemistry

This article describes the technique of fast atom bombardment mass spectrometry (FAB MS) and its applications to the analysis of organometallic and coordination complexes. Sections on ion generation and matrices are followed by a Periodic Group-based review of FAB MS results obtained from Transition Metal and Main Group compounds, organometallic cluster carbonyls and their derivatives, and salts of poly-oxo-anions. The literature has been surveyed from 1981 to approximately mid-1986.     

Non-destructive analysis of archeological samples by energy-dispersive X-ray fluorescence

Summary A non-destructive method is described for the determination of major and minor constituents in archeological specimens by energy-dispersive X-ray fluorescence. Homogeneity tests are made by measuring at various sites of the specimen. In the same way, mean values are obtained for inhomogeneous specimen without taking samples. For calibration, powder standards are used. In case of the determination of elements with numbers up to 14 (Si) a vacuum chamber is used and the dimensions of the specimens are limited by the dimensions of that vacuum chamber, whereas for the determination of elements from K up to U specimens of any size, form or weight are suitable.

---

Zerstörungsfreie Analyse von archäologischen Proben mit Hilfe der Energie-dispersiven Röntgenfluorescenzanalyse

Zusammenfassung Eine zerstörungsfreie Methode für die Bestimmung von Haupt- und Nebenbestandteilen in archäologischen Proben mit Hilfe der Energie-dispersiven Röntgenfluorescenzanalyse wird beschrieben. Für Homogenitätstests wird an mehreren Stellen der Probe gemessen. In der gleichen Weise werden für inhomogene Proben Mittelwerte erhalten ohne Probenahme. Für die Eichung werden Pulverstandards verwendet. Im Falle der Bestimmung von Elementen mit Ordnungszahlen bis 14 (Si) wird eine Vakuumkammer eingesetzt, und die Dimensionen der Proben sind durch die Dimensionen dieser Vakuumkammer begrenzt, während für die Bestimmung der Elemente K bis U Proben jeder Größe, jeder Form oder jeden Gewichts verwendbar sind.