一种新化合物K2Ti8O15纳米线

钛酸钾晶须通常是直径和长度在微米量级的无机晶须 ,可用Ｋ2 Ｏ·ｎＴｉＯ2 表示其组成 ,ｎ =1,2 ,4 ,6 ,8,[1] .六钛酸钾晶须具有耐高温、耐腐蚀、纤维拉伸强度高、导热系数小、红外反射率高 ,硬度低的特点 .在民用及工业方面有很多应用 .如催化剂载体、离子吸附交换材料、高温过滤器、绝热材料、耐摩擦材料等[2～ 5] .钛酸钾纳米线的合成尚未见报道 .我们在用电弧产生的Ｎ2 等离子体热解焦油时 ,生成了一种直径 9～ 2 0ｎｍ长约几百纳米线 .Ｘ射线能谱定量分析表明这种纳米线化学组成为Ｋ2 Ｔｉ8Ｏ15,是一种新的非化学计量化合物 .试验装…     

负载型廉价金属催化剂在低温催化氧化甲醛中的应用

甲醛是室内常见的挥发性有机污染物之一,长期接触会严重危害人体健康.负载型廉价金属催化剂在甲醛去除和实际应用方面表现出优异性能,引起研究人员的广泛关注.本文阐述了低温条件下负载型廉价金属催化剂在甲醛热催化氧化、光催化氧化和等离子协同催化氧化方面的研究进展,介绍了甲醛低温催化的影响因素,并讨论了反应机理.反应条件、载体类型...     

紫外单光子成像系统增益特性研究

介绍了基于微通道板和楔条形阳极的紫外单光子成像系统的组成和工作原理.利用该系统分别研究了两块和三块微通道板在不同电压下的暗计数特性.实验和拟合结果表明微通道板的暗计数脉冲幅度呈负指数型分布,暗计数率随电压升高而增大.通过测试不同电压下的脉冲幅度分布曲线,发现微通道板增益在较高电压下更加均匀.研究了两块微通道板情况下,微通道板电压和间距对系统分辨率的影响.结果表明,系统分辨率随微通道板电压增加而提高;另外,适当增加微通道板间距也可以提高系统分辨率. 关键词： 单光子计数成像 微通道板 楔条形阳极 分辨率     

三氧化钨/氧化银复合材料的水热法合成及其光催化降解性能研究

染料污染是水污染中最严重的问题之一,吸引了很多科学家的关注.人们尝试了很多方法去解决该问题,如化学氧化法、物理吸附法、光催化降解法和生物降解法等.与其他几种方法相比,光催化法有着低能耗、环保以及高效等优势.三氧化钨是常见的半导体材料,具有独特的光学性能,近年来受到了广泛的研究.本文以钨酸钠和硫脲为前驱体,通过水热法制备了三氧化钨/氧化银(WO_3/Ag_2O)复合材料,并用光催化降解亚甲基蓝来分析其光催化性能.通过X射线光电子能谱、X射线衍射、透射电子显微镜、扫描电子显微镜、紫外可见吸收光谱等表征手段对样品的形貌、晶格结构和光催化的性能进行表征.氧化银的带宽为1.2 e V,对可见光很敏感,三氧化钨和氧化银的复合使材料在可见光下的光催化活性显著增强,在可见光下对亚甲基蓝染料的光降解率可以达到98%.实验结果表明,复合材料中的三氧化钨纳米棒为六方相,其平均直径约为200 nm,平均长度约为4μm.而复合材料中的氧化银纳米颗粒为六方相,附着在氧化钨纳米棒的表面,平均晶粒尺寸为20 nm.氧化银的存在为复合材料提供了更多的反应活性位点.相较于单一组分,复合材料在可见光下的光吸收度更高,这说明三氧化钨和氧化银的复合改变了材料的能带结构.研究发现,三氧化钨和氧化银之间形成的异质结构是其优良光催化性能的来源.此外,三氧化钨和氧化银复合材料还具有良好的催化稳定性和化学稳定性.本文结果表明,可以通过给宽带隙的半导体材料复合一些带隙合适的金属氧化物以提升其光催化活性.     

强光电离团簇并行数值模拟

 为研究强激光电离氢原子团簇,在理论上采用1维氢原子团簇的经典粒子动力学模型,结合粒子对(PP)算法及粒子模拟（PIC）方法,采用自行搭建的9节点并行集群系统,利用消息传递接口（MPI)与OpenMP混合编程模型进行了并行数值模拟计算,获得了较为理想的计算加速比。并且引入了弛豫时间参数,有效地处理了粒子间的碰撞过程,在极大简化计算量的同时,保留了物理本质。所得模拟结果与已有的实验结果符合较好,表明该并行计算模型是稳定、可行的。     

等离子体喷射X光时空分辨测量

在“神光”强激光装置上对０．５３μｍ激光产生的等离子体喷射进行了Ｘ光时空分辨诊断。首次利用多针孔阵列成像技术结合软Ｘ光扫描相机观察激光加热区和Ｘ光加热区等离子体的运动，获得了初级和次级等离子体膨胀速度等结果．     

New heterocyclic metallomesogens: synthesis,mesomorphic and thermal behaviours of Cu(II) complexes with 1,2,3-triazole-based Schiff bases ligands

Two series of new Cu(II) complexes derived from the reaction of copper acetate with the non-linear 1,2,3-triazole-based Schiff bases have successfully been synthesised. The structures of the ligands and its complexes were elucidated by elemental analysis, FT-IR, ¹H-NMR and UV–visible spectroscopic techniques. The differential scanning calorimetry and polarizing optical microscopy supported the anisotropic properties of uncoordinated ligands in which the focal conic fan-shaped texture and/or broken fan-shaped texture characteristics of respective SmA and SmC phases were recorded. However, not all of their corresponding Cu(II) complexes are mesogenic. Although the iodo-substituted ligands with even parity C₁₀H₂₉ to C₁₄H₃₃ are non-stable and exhibit SmA phase which is not reproducible, the ultimate Cu(II) complexes show exclusively stable SmA phase. This observation can be ascribed to the enhanced colinearity and molecular anisotropic by the presence of Cu-N and Cu-O coordination modes. On the other hand, the comparison studies show that different positions of ortho-hydroxyl group affect the mesomorphic and thermal behaviour of ligands and Cu(II) complexes.     

Dimesogenic liquid crystal consisting of cholesterol and Schiff base moieties: dependence of LC properties on the spacer length and fluorination of the alkoxy tails

The liquid crystalline properties of two series of non‐symmetric liquid crystal dimers consisting of cholesterol and Schiff base moieties interconnected by ω‐oxyalkanoyl spacers of varying length are compared: one series (SBOC‐ n ) carry the octyloxy tail on the Schiff base mesogen, and the other (SBOF‐ n ) a perfluoroheptylmethyloxy tail. In general, compounds with the fluorinated alkoxy tail exhibited mesophases over a much wider temperature range than those with the alkoxy tail. The latter series favoured the formation of more diverse mesophases than the former. SBOC‐4, ‐5 and ‐7, and SBOF‐4, ‐5 and ‐10 formed the chiral smectic C phase.     

Determination of antazoline hydrochloride in rat plasma and excreta by reversed‐phase ion‐pair chromatography and its application to pharmacokinetics

A reversed‐phase ion pair chromatography method with liquid–liquid extraction analytical method was developed and validated for the determination of antazoline hydrochloride in plasma and excreta of rat. The aim of our study was to characterize the preclinical pharmacokinetics and excretion profiles of antazoline hydrochloride in rats after intravenous injection at the dose of 10 mg/kg. Plasma and excreta samples were extracted with ethyl acetate, and phenacetin was used as the internal standard. The result showed that the method is suitable for the quantification of antazoline hydrochloride in plasma and excreta samples. Analysis of accuracy (90.89–112.33%), imprecision (<7.1%) and recovery (>82.5%) showed adequate values. After a single intravenous administration at 10 mg/kg to rats, plasma concentration profile showed a relative fast elimination proceeding with a terminal elimination half‐life of 3.53 h. Approximately 61.8 and 14.2% of the administered dose were recovered in urine and bile after 72 and 24 h post‐dosing respectively; 5.9% of the administered dose was recovered in feces after 72 h post‐dosing. The above results show that the major elimination route is urinary excretion. Copyright © 2013 John Wiley & Sons, Ltd.     

Validated UPLC‐MS/MS method for determination of moclobemide in human brain cell supernatant and its application to bidirectional transport study

A simple and sensitive analytical method based on ultraperformance liquid chromatography–tandem mass spectrometry (UPLC‐MS/MS) has been developed for determination of moclobemide in human brain cell monolayer as an in vitro model of blood–brain barrier. Brucine was employed as the internal standard. Moclobemide and internal standard were extracted from cell supernatant by ethyl acetate after alkalinizing with sodium hydroxide. The UPLC separation was performed on an Acquity UPLC^TM BEH C₁₈ column (50 × 2.1 mm, 1.7 µm, Waters, USA) with a mobile phase consisting of methanol–water (29.5:70.5, v/v); the water in the mobile phase contained 0.05% ammonium acetate and 0.1% formic acid. Detection of the analytes was achieved using positive ion electrospray via multiple reaction monitoring mode. The mass transitions were m/z 269.16 → 182.01 for moclobemide and m/z 395.24 → 324.15 for brucine. The extraction recovery was 83.0–83.4% and the lower limit of quantitation (LLOQ) was 1.0 ng/mL for moclobemide. The method was validated from LLOQ to 1980 ng/mL with a coefficient of determination greater than 0.999. Intra‐ and inter‐day accuracies of the method at three concentrations ranged from 89.1 to 100.9% for moclobemide with precision of 1.1–9.6%. This validated method was successfully applied to bidirectional transport study of moclobemide blood–brain barrier permeability. Copyright © 2013 John Wiley & Sons, Ltd.