Design and Application of a Set of Vitreous Standards for EDS-SEM Microanalysis of Melting Shop Slags

Non-metallic inclusions in steel are formed due to interactions between liquid steel and its environment in the melting shop (refractories and slags). Particles not trapped in the slag remain in the cast steel, impairing steel properties in service. Inclusion composition varies and certified standards covering the whole compositional range are unavailable.The present study describes the preparation of a set of homogeneous, glassy and crystalline standards with a wide compositional range for use in analysing non-metallic steel inclusions. For this, materials were designed based on knowledge of the compositional range of interest in the Al₂O₃–SiO₂–CaO–MgO–CaF₂ system, which is the matrix of the most frequent steel inclusions. The composition and microstructural homogeneity of the reference materials was verified.     

Effect of beta-cyclodextrin on the hydrolysis of trifluoroacetate esters

The hydrolysis of p-F, p-Cl, and m-Cl phenyl trifluoracetates was studied in the presence of beta-cyclodextrin (beta-CD). The reactions are inhibited by beta-CD at pH 6 while they are catalyzed in alkaline solution. MM3 calculations reproduce some of the experimental results. The substrates form inclusion complexes with beta-CD which are of similar stability as those of the corresponding acetates; however, the association of the transition state is less favorable in these reactions than in those of the acetates, and consequently less stronger catalysis is observed.     

Resolving overlapping peaks in ARXPS data: The effect of noise and fitting method

Peak-fitting of X-ray photoelectron spectroscopy (XPS) data can be very sensitive to noise when the difference on the binding energy among the peaks is smaller than the width of the peaks. This sensitivity depends on the fitting algorithm. Angle-resolved XPS (ARXPS) analysis offers the opportunity of employing the combined information contained in the data at the various angles to reduce the sensitivity to noise. The assumption of shared peak parameters (center and width) among the spectra for the different angles, and how it is introduced into the analysis, plays a basic role. Sequential fitting is the usual practice in ARXPS data peak-fitting. It consist on first estimating the center and width of the peaks from the data acquired at one of the angles, and then using those parameters as a starting approximation for fitting the data for each of the rest of the angles. An improvement of this method consists of averaging the centers and widths of the peaks obtained at the different angles, and then employing these values to assess the areas of the peaks for each angle. Another strategy for using the combined information is by assessing the peak parameters from the sum of the experimental data. The complete use of the combined information contained in the data-set is optimized by the simultaneous fitting method. It consists of the assessment of the center and width of the peaks by fitting the data at all the angles simultaneously. Computer-generated data was employed to compare the sensitivity with respect to noise between the sequential, averaged-sequential, sum, and simultaneous fitting methods. It is shown that the latter is significantly more robust and could provide reliable results even for noisy data and small peak separation. The fundamentals for the robustness of the simultaneous method are discussed, as well as the possibility of fitting many parameters at the same time. As an added feature of ARXPS, it was found that the estimation of the error intervals on the peak parameters is done remarkably more precisely by employing XPS data at various angles.     

Nitrones in Organic Synthesis. Synthesis of Secondary Allyl Amines

Nitrones 1 undergo addition of vinyl organomagnesium bromide to give the allyl hydroxylamines 3 which are easily reduced to the corresponding N-benzyl allyl amines 2.     

5‐Methyl‐N‐[2‐nitro‐4‐(trifluoromethyl)phenyl]‐1H‐pyrazole‐3‐amine: a chain of hydrogen‐bonded R22(6) and R22(16) rings

The molecular skeleton of the title compound, C₁₁H₉F₃N₄O₂, is almost planar and exhibits a polarized (charge‐separated) electronic structure in the nitroaniline portion. Molecules are linked by N—H...N and C—H...O hydrogen bonds to form a chain in which centrosymmetric R₂²(6) and R₂²(16) rings alternate.     

Flash DSC crystallization study for blown film grade bimodal HDPE resins. I. Isothermal kinetics and its application of the blown film modeling

Isothermal ultra‐cooling crystallization tests were conducted on three blown film grade bimodal HDPE resins using an ultrafast scanning calorimeter, the Flash DSC. Isothermal tests were performed to study the regime transition, the thermal nucleation and the spherulitical growth using the Hoffman‐Lauritzen theory in a range between 90 °C and 116 °C. Temperature profile estimations using such data were in good agreement with actual blown film process data. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2425–2431     

Solid‐state drawing of β‐nucleated polypropylene: Effect of additives on drawability and mechanical properties

Isotactic polypropylene (i‐PP) can crystallize in different crystal modifications. In this article, the effect of sepiolite (one‐dimensional) and carbon black (three‐dimensional) fillers on the solid‐state drawability of i‐PP is discussed. The cross‐hatched structure of thermodynamically most stable α‐crystal phase in i‐PP does not allow for perfect chain alignment during solid‐state drawing. The β‐phase i‐PP, obtained by addition of specific nucleating agents, crystallizes in a non‐cross‐hatched spherulitic structure and allows more easy drawing. Depending on the filler type, β–α transformation takes place at different draw ratios, as was observed by in situ wide‐angle X‐ray diffraction measurements. It was observed that β‐nucleated i‐PP has a lower yield stress and can be drawn further than i‐PP crystallized in the α‐crystal phase. If added in the right amount, both carbon black and sepiolite have a reinforcing effect on PP tapes. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1071–1082