Electromembrane extraction (EME) and HPLC determination of non-steroidal anti-inflammatory drugs (NSAIDs) in wastewater samples

In this paper, an electromembrane extraction (EME) combined with a HPLC procedure using diode array (DAD) and fluorescence detection (FLD) has been developed for the determination of six widely used non-steroidal anti-inflammatory drugs (NSAIDs): salicylic acid (SAC), ketorolac (KTR), ketoprofen (KTP), naproxen (NAX), diclofenac (DIC) and ibuprofen (IBU). The drugs were extracted from basic aqueous sample solutions, through a supported liquid membrane (SLM) consisting of 1-octanol impregnated in the walls of a S6/2 Accurel^® polypropylene hollow fiber, and into a basic aqueous acceptor solution resent inside the lumen of the hollow fiber with a potential difference of 10 V applied over the SLM. Extractions that were carried out in 10 min using a potential of 10 V from pH 12 NaOH aqueous solutions shown concentration enrichments factors of 28-49 in a pH 12 NaOH aqueous acceptor solution. The proposed method was successfully applied to urban wastewaters. Excellent selectivity was demonstrated as no interfering peaks were detected. The procedure allows very low detection and quantitation limits of 0.0009-9.0 and 0.003-11.1 μg L⁻¹, respectively.     

Determination of ethylene glycol dinitrate in dynamites using HPLC: application to the plastic explosive Goma-2 ECO

In this study, a sequential extraction method using water and methanol to recover ethylene glycol dinitrate or nitroglycol (EGDN) contained in Goma-2 ECO dynamite was developed. After, an HPLC method was used for the determination of EGDN in the two extracted phases. The analytical method was validated by evaluating its selectivity, sensitivity, linearity, and linear working concentration range, limit of detection and quantitation, precision (as repeatability and intermediate precision), accuracy, and robustness, providing appropriate values (i.e. RSD values for precision about 6% and accuracy about 100%). Finally, the EGDN content of a sample of the Goma-2-ECO dynamite was determined obtaining a concentration of 30.29%, which is in accordance with the manufacturer's specifications for this dynamite (25.7-31.4%).     

Activity of Cuban propolis extracts on Leishmania amazonensis and Trichomonas vaginalis

In this paper we analyzed the antiprotozoal effects of eighteen Cuban propolis extracts (brown, red and yellow type) collected in different geographic areas, using Leishmania amazonensis (as a model of intracellular protozoa) and Trichomonas vaginalis (as a model of extracellular protozoa). All evaluated propolis extracts caused inhibitory effect on intracellular amastigotes of L. amazonensis. However, cytotoxicity on peritoneal macrophages from BALB/c mice was observed. Only five samples decreased the viability of T. vaginalis trophozoites at concentrations lower than 10 microg/mL. No correlation between the type of propolis and antiprotozoal activity was found. Cuban propolis extracts demonstrated activity against both intracellular and extracellular protozoa model, as well as the potentialities of propolis as a natural source to obtain new antiprotozoal agents.     

CE methods for analysis of isoforms of prostate-specific antigen compatible with online derivatization for LIF detection

Prostate-specific antigen (PSA) is the usual biomarker for prostate cancer (PCa). However, its lack of selectivity has lead to the search for new biomarkers. PSA glycosylation seems to depend on the pathophysiological conditions of the individual. Thus, methods to separate PSA isoforms (peaks) to study their role as PCa markers are needed. In this work, CE methods for PSA isoforms separation, based on the use of different dynamic coatings, are developed using UV detection. Three complementary CE methods allowing the separation of 8 or 9 PSA isoforms are selected. The longest method takes only 17?min, while the shortest one separates 9 isoforms in < 8?min. Depending on the isoforms of interest for their use as PCa biomarker, the CE method to be used can be chosen or various of them can be combined. A remarkable aspect of these methods is that the BGEs employed are devoid of compounds with primary amino groups, making the CE methods compatible with fluorescent on-column derivatization through amino residues. As a proof-of-concept, a preliminary result shows that LIF detection of labeled PSA analyzed by one of the three developed methods permits detection of glycoprotein isoforms.     

Ionic azo-codendrimers: Influence of the acids contents in the liquid crystalline properties and the photoinduced optical anisotropy

A series of codendrimers has been prepared by the grafting of poly(propylene imine) PPI-(NH₂)₁₆ (G = 3) with two different carboxylic acids: the aromatic-based 5-[4′-(4-cyanophenylazo)phenyloxy]pentanoic acid (AZO) and the aliphatic 2,2-bis(undecanoyloxymethylene)propionic acid (BUPA) in different proportions. Their thermal properties, liquid crystalline behavior and photoinduced optical anisotropy have been investigated. The formation of the ionic compounds was confirmed by nuclear magnetic resonance (NMR) spectroscopy, and Fourier transform infrared (FT-IR) spectroscopy. The influence of the acid percentage in the liquid crystalline behavior was investigated by means of differential scanning calorimetry (DSC), polarizing optical microscopy (POM) and X-ray diffractometry (XRD). All the resulting co-dendrimers present liquid crystalline properties displaying an evolution from nematic mesophase for the azo-richer dendrimers to smectic A mesophase for the BUPA-richer dendrimers. Only materials with low azobenzene contents up to four AZO units per dendrimer on average were processable by casting from dichloromethane solutions and resulted in transparent thin films appropriate for optical studies. The photoinduced dichroism reached was higher in the dendrimer with higher azo content (four units per dendrimer) being this material a good compromise between processability and optical response.     

Effect of synthesis conditions on the microstructure of TEOS derived silica hydrogels synthesized by the alcohol-free sol–gel route

Silica matrices synthesized from a pre-hydrolysis step in ethanol followed by alcohol removal at low pressure distillation, and condensation in water, are suitable for encapsulation of biomolecules and microorganisms and building bioactive materials with optimized optical properties. Here we analyze the microstructure of these hydrogels from the dependence of I(q) data acquired from SAXS experiments over a wide range of silica concentration and pH employed in the condensation step. From the resulting data it is shown that there is a clear correlation between the microscopic parameters—cluster fractal dimension (D), elementary particle radius (a) and cluster gyration radius (R)—with the attenuation of visible light when the condensation step proceeds at pH < 6. At higher pHs, there is a steep dependence of the cluster density (~R ^D−3) with the condensation pH, and non-monotonous changes of attenuance are less than 20%, revealing the complexity of the system. These results, which were obtained for a wide pH and silica concentration range, reinforce the idea that the behavior of gels determined in a restricted interval of synthesis variables cannot be extrapolated, and comparison of gelation times is not enough for predicting their properties.     

Imidazolinone herbicides in strongly acidic media: Speciation and electroreduction

From UV-visible measurements and potentiometric titrations it follows that the lowest pK values (pK₁) of imidazolinone herbicides correspond to the simultaneous protonation/dissociation equilibria of both the pyridinic (or quinolinic) nitrogen and the carboxyl group, the following pK (pK₂) to the imminium nitrogen and the basic pK (pK₃) to the dissociation of the imido nitrogen. Below pH 6 and down to pH c.a. 2.5, the dominant form of the herbicide is a double ion having both positive and negative charges, this being important in discussing the effect of pH in the natural dynamics of imidazolinone herbicides, especially in their soil sorption. Electrochemical studies of the reduction of the herbicides were made on mercury and carbon electrodes in strongly acidic media (0.1 to 2.7 M H₂SO₄) as well up to pH 7. The reduction signals were all attributed to the reduction of the imidazolinone ring except the second peak/wave that was found to have originated by the reduction of the pyridine/quinoline ring. A signal observed in strongly acidic media and at highly negative overpotentials was attributed to the reduction of the imidazolinone ring of the product of the previous reduction in a process consisting of two reversible electron transfers followed by a protonation reaction.     

A simple approach to sensor discovery and fabrication on self-assembled monolayers on glass

Self-assembled monolayers (SAMs) on glass were used as a platform to sequentially deposit fluorophores and small molecules for ion sensing. The preorganization provided by the surface avoids the need for complex receptor design, allowing for a combinatorial approach to sensing systems based on small molecules. The resulting libraries are easily measured and show varied responses to a series of both cations and anions. This technology is transferable from the macro- to the microscale both via microcontact printing (microCP), where the fluorophore is printed onto a glass surface, and via direct attachment of the fluorophore to microchannel walls. The ease of miniaturization of this technology may make the generation of a wide variety of simple yet efficient microarrays possible.     

Small-volume radial flow cell for all-solid-state ion-selective electrodes

A flow cell with a radial distribution of four all-solid-state ion selective electrodes (ISEs), or alternatively three ISEs and one reference electrode, was designed and optimized for mass production. The radial distribution of the electrodes reduces the cell volume and is expected to minimize cross-contamination between different electrodes. Two different cell prototypes were developed and tested for all-solid-state K⁺-ISEs based on a solvent polymeric ion-selective membrane (ISM) and a conducting polymer, poly(3,4-ethylenedioxythiophene), as solid internal contact. In the first prototype, PEDOT was electropolymerized from an aqueous solution of the monomer and the doping ion salt, sodium polystyrenesulfonate (NaPSS). The second prototype employed an aqueous dispersion of PEDOT(PSS) that is commercially available (Baytron P, Bayer AG). Compared to electrochemical synthesis, solution casting of the polymer dispersion was found to be a more advantageous method to deposit the conducting polymer layer aiming at mass production. The resulting prototypes of the flow cell had a small volume (ca. 17-37 μl), which makes them suitable for application in clinical analysis.     

A novel strategy towards the asymmetric synthesis of orthogonally funtionalised 2-N-benzyl-N-alpha-methylbenzylamino- 5-carboxymethyl-cyclopentane-1-carboxylic acid

The asymmetric synthesis of the orthogonally funtionalised compounds tert-butyl 2-N-benzyl-N-alpha-methylbenzylamino-5-methoxycarbonylmethylcyclopentane- 1-carboxylate and methyl 2-N-benzyl-N-alpha-methylbenzylamino-5-carboxymethylcyclo- pentane-1-carboxylate by a domino reaction of tert-butyl methyl (E,E)-octa-2,6- diendioate with lithium N-alpha-methylbenzyl-N-benzylamide initiated by a Michael addition, subsequent 5-exo-trig intramolecular cyclisation and posterior selective hydrolysis with trifluoroacetic acid is reported.