Cross‐coupling reactions in water using ionic liquid‐based palladium(II)–phosphinite complexes as outstanding catalysts

Two new phosphinite ligands based on ionic liquids [(Ph₂PO)C₇H₁₄N₂Cl]Cl ( 1 ) and [(Cy₂PO)C₇H₁₄N₂Cl]Cl ( 2 ) were synthesized by reaction of 1‐(3‐chloro‐2‐hydoxypropyl)‐3‐methylimidazolium chloride, [C₇H₁₅N₂OCl]Cl, with one equivalent of chlorodiphenylphosphine or chlorodicyclohexylphosphine, respectively, in anhydrous CH₂Cl₂ and under argon atmosphere. The reactions of 1 and 2 with MCl₂(cod) (M = Pd, Pt; cod = 1,5‐cyclooctadiene) yield complexes cis‐[M([(Ph₂PO)C₇H₁₄N₂Cl]Cl)₂Cl₂] and cis‐[M(Cy₂PO)C₇H₁₄N₂Cl]Cl)₂Cl₂], respectively. All complexes were isolated as analytically pure substances and characterized using multi‐nuclear NMR and infrared spectroscopies and elemental analysis. The catalytic activity of palladium complexes based on ionic liquid phosphinite ligands 1 and 2 was investigated in Suzuki cross‐coupling. They show outstanding catalytic activity in coupling of a series of aryl bromides or aryl iodides with phenylboronic acid under the optimized reaction conditions in water. The complexes provide turnover frequencies of 57 600 and 232 800 h^?1 in Suzuki coupling reactions of phenylboronic acid with p‐bromoacetophenone or p‐iodoacetophenone, respectively, which are the highest values ever reported among similar complexes for Suzuki coupling reactions in water as sole solvent in homogeneous catalysis. Furthermore, the palladium complexes were also found to be highly active catalysts in the Heck reaction affording trans‐stilbenes. Copyright © 2014 John Wiley & Sons, Ltd.     

Straightforward access to chiral diol bidentate ligands: their efficient enantioselective induction in the addition of diethylzinc to aromatic aldehydes

Enantiopure C₂‐symmetric diol bidentate ligands have been synthesized in a straightforward manner through a three‐step reaction with good yields. The synthesized C₂‐symmetric diol bidentate ligands were used in the addition of diethylzinc to various aromatic aldehydes, a general catalytic benchmark reaction, in order to assess their enantioselective induction properties. The enantioselective addition of diethylzinc to 1‐naphthaldehyde and 3‐chlorobenzaldehyde was achieved with an enantiomeric excess (ee) of up to 98%. All synthesized ligands were also evaluated in the addition of diethyzinc to aromatic aldehydes including an extra metal such as Ti(IV) (up to 99% ee). Copyright © 2014 John Wiley & Sons, Ltd.     

An ITO Based Disposable Biosensor for Ultrasensitive Analysis of Retinol Binding Protein

A highly sensitive electrochemical biosensor based on anti‐RBP biorecognition capable to analyze concentrations of retinol binding protein (RBP) was developed. The construction of the biosensor interfaces was carefully characterized by techniques such as electrochemistry, EIS, and scanning electron microscopy. In order to characterize impedance data, Kramers‐Kronig Transform was performed on the experimental impedance data. Besides, for an immunosensor system the Single Frequency Impedance technique was firstly used for the characterization of the interaction between RBP and anti‐RBP. Finally, artificial serum samples spiked with RBP were analyzed by the proposed ITO based immunosensor to investigate the usefulness of the biosensor for early biomarker diagnosis.     

Stereoselective Synthesis of 1,2,3‐Triazolooxazine and Fused 1,2,3‐Triazolo‐δ‐Lactone Derivatives

The stereoselective synthesis of 1,2,3‐triazolooxazine and fused 1,2,3‐triazolo‐δ‐lactone by applying chemoenzymatic methods is described. trans‐2‐Azidocyclohexanol was successfully resolved by Novozyme 435 with an ee value of 99%. Installation of the alkyne moiety on the enantiomerically enriched azidoalcohol by O‐alkylation, followed by intramolecular azide? alkyne [3+2] cycloaddition resulted in the desired 1,2,3‐triazolooxazine derivative. Enantiomerically pure azidocyclohexanol was also subjected to the Huisgen 1,3‐dipolar cycloaddition reaction with dimethylacetylene dicarboxylate, followed by intramolecular cyclization of the corresponding cycloadduct, to furnish a fused 1,2,3‐triazolo‐δ‐lactone.     

Fabrication and electrical characterisation of the Ti/GaTe/p-Si device under 18 MeV electron irradiation

We deposited GaTe thin films with electrochemical growth technique on p-Si (100) substrate and investigated their structural and electrical properties. The electrical characteristics of the Ti/GaTe/p-Si/Al Schottky diode (SD) were determined by means of I–V (current–voltage) and C–V (capacitance–voltage) measurements. The diodes were irradiated with high energy (18 MeV) and low doses (1.38 × 10¹⁰ e^? cm^?2) electrons. The ideality factor values for Ti/GaTe/p-Si/Al structure were calculated as 1.27 and 1.53 and the barrier heights have been obtained as 0.739 and 0.706 eV from I–V measurements before and after each electron irradiations, respectively. Also, the parameters such as built-in potential, Fermi levels, acceptor concentration and barrier height of the Ti/GaTe/p-Si/Al SD have been calculated by the help of C–V measurements before and after each irradiations. The change in parameters was interpreted by the defect formation at the interface due to the electron irradiation.     

Enantioselective addition of diethylzinc to aromatic aldehydes catalyzed by C2-symmetric chiral diols

Optically pure C₂-symmetric diols have been synthesized with moderate yields in a straightforward manner, and are used as catalysts in the enantioselective alkylation of aromatic aldehydes with diethylzinc. The addition of diethylzinc to benzaldehyde and sterically hindered 1-naphthaldehyde was achieved with excellent enantioselectivities (97–99% ee) under catalysis with (1R,2R)-1,2-bis(3,5-dibromophenyl)-ethane-1,2-diol and (1R,2R)-1,2-bis(3,5-diphenylphenyl)-ethane-1,2-diol.     

Synthesis of cyclohexane derivatives including Br,Cl, N,O, and S at 1,2,4,5-positions: selectivity in addition reactions

Brominations of mono addition products of 1,4-cyclohexadiene with 2,4-dinitrobenzenesulfenyl chloride (RSCl) selectively gave 1R(S),2R(S),4R(S),5R(S)-4,5-dibromo-2-(2,4-dinitrophenylthio)cyclohexyl acetate and 1R(S),2R(S),4R(S),5R(S)-4,5-dibromo-2-chlorocyclohexyl)(2,4-dinitrophenylthio)sulfane. From series reactions 7-oxabicyclo[4.1.0]hept-3-ene with reagents, such as RSCl, NaN₃, and H₂SO₄/Ac₂O, six 1,2,4,5-tetrasubstituted cyclohexane derivatives including S, O, N, Cl, and Br were selectively obtained. Formations and structures of the products were discussed.     

Synthesis of some acylated 2-pyrazoline and chalcone derivatives

α-Haloesters containing the chalcone structure and α-haloamides containing the pyrazoline ring have been synthesized by reaction of substituted hydroxy chalcones and pyrazoline derivatives (prepared as reported elsewhere; J Chem 8(4):1574–1581, 2011) with chloroacetyl chloride in dry THF in the presence of Et₃N. The structures of the synthesized compounds were confirmed by IR, ¹H NMR, and (for some compounds) ¹³C NMR spectroscopy.     

Molecular structure, IR and NMR spectra of 2,6 distyrylpyridine by density functional theory and ab initio Hartree-Fock calculations

Vibrational frequencies and gauge including atomic orbital (GIAO) 13C NMR and 1H NMR chemical shift values of 2,6 distyrylpyridine (C21H17N) in the ground state have been calculated by using the Hartree-Fock (HF) and density functional method (B3LYP) with 6-31G(d) basis set. These methods are proposed as a tool to be applied in the structural characterization of 2,6 distyrylpyridine (C21H17N). The title compound has C2v point group, thus providing useful support in the interpretation of experimental IR data. In addition, obtained results were related to the linear correlation plot of experimental 13C NMR, 1H NMR chemical shifts values and IR data.