110K铋基超导相形成的组成条件

Bi-Sr-Ca-Cu-O超导材料中存在110K和80K2个超导相。其组成是Bi_2Sr_2Ca_2Cu_3O_y和Bi_2Sr_2CaCu_2O。但迄今为止,在按2223组成比合成的未掺杂Bi系超导材料中从未得到过纯的110K相,也未见过组成为2223,零电阻温度在100K以上材料的报道。为了探索形成110K相的最佳条件,本文以2223组成比为参考,合成了5个系列材料:Bi_xSr_2Ca_2Cu_3O_y,Bi_2Sr_xCa_2Cu_3O_y,Bi_2Sr_2Ca_xCu_3O_y,Bi_2Sr_2Ca_2Cu_xO_y,Bi_i Sr_uCa_yCu_wO_s。     

Novel CaCO3/g-C3N4 composites with enhanced charge separation and photocatalytic activity

A novel CaCO₃/graphitic carbon nitride (g-C₃N₄) photocatalyst was synthesized for the first time via a facile calcination method using CaCO₃ and melamine as precursors. The as-prepared samples were characterized using various techniques, such as scanning and transmission electron microscopy, X-ray diffraction, Brunauer-Emmett-Teller analysis, as well as Fourier-transform infrared, X-ray photoelectron, photoluminescence, and UV–vis diffuse reflectance spectroscopy. The results of the experiments confirm the successful coupling of CaCO₃ to g-C₃N₄. The photocatalytic activity of the synthesized CaCO₃/g-C₃N₄ composites was evaluated by assessing their performance in the photocatalytic degradation of crystal violet (CV) in water under visible light irradiation. The analysis shows that CaCO₃/g-C₃N₄ exhibits higher photocatalytic activity towards CV degradation (76.0%) than pristine g-C₃N₄ (21.6%) and CaCO₃ (23.2%). Radical trapping and electron spin resonance experiments show that hydroxyl radicals (OH) and holes (h⁺) are the key reactive species in the photocatalytic process. The enhanced photocatalytic activity of the composite is mainly attributed to the efficient separation rate of electron-hole pairs achieved through the incorporation of CaCO₃.     

Influence of the Size of Aromatic Chelate Ligands on the Structures of Cadmium(II) Tetracarboxylates Polymers: From 2D Layered Network to 3D Metal‐Organic Framework

To determine the influence of the size of the aromatic chelate ligands on the frameworks of metal tretracarboxylate polymers, two new coordination polymers [Cd(btc)_0.5 (2,2′‐bpy)] ( 1 ) and [Cd(btc)_0.5(phen)]·H₂O ( 2 ) (H₄btc = biphenyl‐3,3′,4,4′‐tetracarboxylic acid, 2,2′‐bpy = 2,2′‐bipyridine, phen = 1,10‐phenanthroline) have been synthesized under similar hydrothermal conditions. In complex 1 , the dimeric Cd₂ units are linked by bridging btc^4? ligand to form a 2D layered network, whereas complex 2 possesses a 3D metal‐organic framework consisting of the dimeric Cd₂ units. The differences of two metal‐organic frameworks demonstrate that the size of the rigid aromatic chelate ligands have an important effect on the structures of their complexes. Additionally, the two complexes show strong fluorescence in the solid state at room temperature.     

Synthesis and optical properties of unsymmetrical conjugated dendrimers focally anchored with perylenes in different geometries

Two sets of light-harvesting monodendrons with unsymmetrical conjugated phenylacetylene branches and perylene cores, one with pi-conjugation from the branches to the core and one without, were synthesized and their photophysical properties were studied by steady-state and time-resolved spectroscopic methods. These monodendrons show comparably high fluorescence quantum yields and efficient energy-transfer properties.     

Synthesis and antimicrobial activity of a perfluoroalkyl-containing quaternary ammonium salt

A novel perfluoroalkyl-containing quaternary ammonium salt 5 was designed and synthesized. Consequently, the antimicrobial activities of compound 5 were measured with Escherichia coli 8099 as a Gram-negative strain and Staphylococcus aureus ATCC 6538 as a Gram-positive strain. Both the minimum inhibitory concentration (MIC, the lowest concentration of compound 5 that inhibits microbial growth) values of quaternary ammonium salt 5 against Escherichia coli 8099 and Staphylococcus aureus ATCC 6538 were 7.8 μg/ml.     

配位化学的创始与现代化

本文扼要介绍了韦尔纳配位理论的第一篇文章的内容，讨论了配位化学的发展和现代化。配合物稳定性决定于多种作用力与组分间的互补性和拓扑约束性。     

Synthesis and characterization of block copolymers from 2‐vinylnaphthalene by anionic polymerization

The anionic polymerization of 2‐vinylnaphthalene (2VN) has been studied in tetrahydrofuran (THF) at ?78 °C and in toluene at 40 °C. 2VN polymerization in THF, toluene, or toluene/THF (99:1 v/v) initiated by sec‐butyllithium (sBuLi) indicates living characteristics, affording polymers with predefined molecular weights and narrow molecular weight distributions. Block copolymers of 2VN with methyl methacrylate (MMA) and tert‐butyl acrylate (tBA) have been synthesized successfully by sequential monomer addition in THF at ?78 °C initiated by an adduct of sBuLi–LiCl. The crossover propagation from poly(2‐vinylnaphthyllithium) (P2VN) macroanions to MMA and tBA appears to be living, the molecular weight and composition can be predicted, and the molecular weight distribution of the resulting block copolymer is narrow (weight‐average molecular/number‐average molecular weight < 1.3). Block copolymers with different chain lengths for the P2VN segment can easily be prepared by variations in the monomer ratios. The block copolymerization of 2VN with hexamethylcyclotrisiloxane also results in a block copolymer of P2VN and poly(dimethylsiloxane) (PDMS) contaminated with a significant amount of homo‐PDMS. Poly(2VN‐b‐nBA) (where nBA is n‐butyl acrylate) has also been prepared by the transesterification reaction of the poly(2VN‐b‐tBA) block copolymer. Size exclusion chromatography, Fourier transform infrared, and ¹H NMR measurements indicate that the resulting polymers have the required architecture. The corresponding amphiphilic block copolymer of poly(2VN‐b‐AA) (where AA is acrylic acid) has been synthesized by acidic hydrolysis of the ester group of tert‐butyl from the poly(2VN‐b‐tBA) copolymer. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4387–4397, 2002     

Triboelectric pulsed direct current for self-powered sterilization of cellulose fiber

A variety of liquid energy exists in papermaking engineering and has not yet been developed and utilized. In addition, for the papermaking industry, the presence of slime can seriously affect the quality of the finished paper and can lead to paper breaking. The current slime control strategies cannot completely solve the problem and also have some low toxicity. In this study, a method of self-powered sterilization of cellulose fibers by using triboelectric pulsed direct current is reported. A liquid–solid triboelectric nanogenerator (L–S TENG) was used to convert the liquid energy of nanocellulose suspension into electrical energy and convert this electrical energy into pulsed direct current for self-powered sterilization of cellulose fiber. A hydrophobic coating material is used as solid triboelectric material and electrode for sterilization. Driven by L–S TENG, the electrodes exhibited an excellent sterilization rate against four microorganisms including Escherichia coli, Aspergillus niger, Candida albicans, and Klebsiella pneumoniae, which from slime in the papermaking industry. This study could provide a basic research theory for liquid energy harvesting in the papermaking industry, and also provide a new strategy for pulp sterilization.

Graphical abstract

     

Grape tissue-based electrochemical sensor for the determination of hydrogen peroxide

The use of grape tissue as a source of catalase for the determination of hydrogen peroxide is reported. A slice of grape tissue attached to the membrane of a Clark-type oxgen sensor was used to monitor the oxidation of hydrogen peroxide by catalase. At the steady state, the sensor responds linearly to hydrogen peroxide in the concentration range 1 × 10^?5–5 × 10^?4 M. The response time (T₉₀) was of the order of 1 min for this sensor. No interference was observed from ethanol, amino acids, glucose and lactic acid. The long-term stability of the grape tissue sensor was much better than previously reported immobilized enzyme and liver tissue-based hydrogen peroxide sensors.