Searches for single-spin asymmetry in the inclusive production of neutral pions in the central region at a proton beam energy of 70 GeV

Results are presented that were obtained by measuring single-spin asymmetry in the inclusive production of neutral pions in the reaction p+p ↑→ π ⁰+X at x _F≈0. A beam of 70-GeV protons was extracted directly from the vacuum chamber of the accelerator by means of a bent single crystal. For transverse momenta in the range 1.0<p _T<3.0 GeV/c, the single-spin asymmetry independently measured by two detectors is zero within the errors. This result is in agreement with Fermilab data obtained at 200 GeV, but it is at odds with CERN data measured at 24 GeV.     

The structure,magnetic and spectral properties of 4-acetylpyridine N-oxide complexes of copper(II) propionates

The synthesis and characterization of CuX₂L; (X = CH₃CH₂COO^?, ClCH₂CH₂COO^?, CH₃CHClCOO^? or CH₃CCl₂COO^?; and L = 4-acetylpyridine N-oxide) is reported. The characterization of these compounds was based on electronic, infrared and EPR spectra, as well as magnetic measurements over the temperature range. Several correlations between the spectral and magnetic data as well as pK_a values of the respective acids were found and discussed. On the basis of spectral and magnetic data the structures of the compounds are discussed.     

Multifunctional Sulfur-Hyperdoped Silicon Nanoparticles with Engineered Mid-Infrared Sulfur-Impurity and Free-Carrier Absorption

Si nanoparticles (NPs), which are innovative promising light-harvesting components of thin-film solar cells and key-enabling biocompatible theranostic elements of infrared-laser and radiofrequency hyperthermia-based therapies of cancer cells in tumors and metastases, are significantly advanced in their near/mid-infrared band-to-band and free-carrier absorption via donor sulfur-hyperdoping during high-throughput facile femtosecond-laser ablative production in liquid carbon disulfide. High-resolution transmission electron microscopy and Raman microscopy reveal their mixed nanocrystalline/amorphous structure, enabling the extraordinary sulfur content of a few atomic percents and very minor surface oxidation/carbonization characterized by energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy. A 200-nm thick layer of the nanoparticles exhibits near−mid-infrared absorbance, comparable to that of the initial 380-micron thick n-doped Si wafer (phosphor-dopant concentration ≈10¹⁵ cm⁻³), with the corresponding extinction coefficient for the hyperdoped NPs being 4–7 orders higher over the broadband spectral range of 1–25 micrometers. Such ultimate, but potentially tunable mid-IR structured, multi-band absorption of various sulfur-impurity clusters and smooth free-carrier absorption are break through advances in mid-infrared (mid-IR) laser and radiofrequency (RF) hyperthermia-based therapies, as envisioned in the RF-heating tests, and in fabrication of higher-efficiency thin-film and bulk photovoltaic devices with ultra-broad (UV−mid-IR) spectral response.     

First passage time for multivariate jump‐diffusion processes in finance and other areas of applications

The first passage time (FPT) problem is an important problem with a wide range of applications in science, engineering, economics, and industry. Mathematically, such a problem can be reduced to estimating the probability of a stochastic process first to reach a boundary level. In most important applications in the financial industry, the FPT problem does not have an analytical solution and the development of efficient numerical methods becomes the only practical avenue for its solution. Most of our examples in this contribution are centered around the evaluation of default correlations in credit risk analysis, where we are concerned with the joint defaults of several correlated firms, the task that is reducible to a FPT problem. This task represents a great challenge for jump‐diffusion processes (JDP). In this contribution, we develop further our previous fast Monte Carlo method in the case of multivariate (and correlated) JDP. This generalization allows us, among other things, to evaluate the default events of several correlated assets based on a set of empirical data. The developed technique is an efficient tool for a number of financial, economic, and business applications, such as credit analysis, barrier option pricing, macroeconomic dynamics, and the evaluation of risk, as well as for a number of other areas of applications in science and engineering, where the FPT problem arises. Copyright © 2008 John Wiley & Sons, Ltd.     

Light emission from nanocrystalline silicon clusters embedded in silicon dioxide: Role of the suboxide states

Silicon clusters embedded in a silicon dioxide matrix were prepared by ultrasound-assisted implantation resulting in a modified concentration of suboxide states as revealed by high-resolution photoelectron spectroscopy. It is suggested that ultrasound treatment results in formation of different interface structure between silicon cluster and silicon dioxide matrix which is characterized by a distinctly reduced concentration of the suboxide states. It is observed that photoluminescence properties are strongly correlated with the concentration of the suboxide states thereby providing an evidence that besides a quantum confinement effect a closer look at the chemical composition of the nc-Si/SiO₂ system is important.     

EFFECT OF INTERNAL VISCOSITY OF POLYMERIC FLUIDS UNDER STRONG EXTENSIONAL FLOWS

The dumbbell model with internal viscosity for a dilute polymer solution is investigated based on a balance of viscous drag and restoring Brownian forces.An approximate method is used to obtain the solution of extensional stress in closed form in the case of steady flow.For different internal viscosities,this parametric study shows different asymptotic regimes of the extensional viscosity as a function of strain rate.This analysis may explain the attenuation of pressure drop in strong flows from a phenom...     

Molecular distortion effect on ff-emission in a Pr(III) complex with 4,7-diphenyl-1,10-phenanthroline.

The electronic and structural behaviour of a Pr(III) complex with 4,7-diphenyl-1,10-phenanthroline, [Pr(bathophen)(2)(NO(3))(3)], is investigated with respect to the effect of configuration changes on the Pr(III) centre. [Pr(bathophen)(2)(NO(3))(3)] luminesces from the excited states of the ligand and the metal ion. The fluorescence, ff-emission ((1)D(2)-->(3)H(4)), and phosphorescence bands appear at 394, 608.2 and 482 nm, respectively, in the solid state. In acetonitrile, the complex also shows multiple emissions. From the time-resolved emission and the lifetime measurements, the excitation energy-transfer in [Pr(bathophen)(2)(NO(3))(3)] is clarified, that is, the upper excited triplet level of the ligand acts as an energy donor, while the (1)D(2) levels of Pr(III) is the acceptor. Additionally, the emission phenomena of the complex can be modified by molecular distortion, particularly by rotation of the phenyl groups in the ligand.     

Predicting the shock sensitivity of cyclotrimethylene-trinitramine

We studied the surface and thermal properties of seven different varieties of cyclotrimethylene-trinitramine (RDX) crystalline explosives from five manufacturers using differential scanning calorimetry (DSC) and atomic force microscopy (AFM). The specific varieties of the RDX studied were acquired from the previous Reduced Sensitivity RDX Round Robin program. They were chosen because intensive characterization of the materials already existed including shock sensitivity and cyclotetramethylene-tetranitramine (HMX) impurity levels. AFM scans revealed a diversity of surface defects. To quantify the surface defects on the crystalline surface of the RDX particles, surface roughness measurements were acquired. Statistical analysis was undertaken to correlate the observed surface, HMX impurity levels, and DSC thermal curve properties with the known shock sensitivities of the material. It was determined that a statistically significant relationship exists between surface roughness and the shock sensitivity of the material while no relationship was observed between the DSC thermal properties and either surface roughness or shock sensitivity. The HMX content greatly affected the thermal properties of RDX but was uncorrelated with the shock sensitivity.     

Hydrogen-bonded coordination network in crystal structures of [Cu(3-PM)4Cl2] and [Cu(4-PM)4Cl]Cl, (PM = pyridylmethanol)

The crystal and molecular structures of [Cu(3-PM)₄Cl₂] (1) and [Cu(4-PM)₄Cl]Cl (2) have been determinated by X-ray crystallography. Complex 1 crystallizes in the triclinic system, space group P–1, with lattice parameters a = 7.972(2) Å, b = 8.293(2) Å, c = 10.707(2) Å, = 105.73(3)°, = 90.04(3)°, = 110.38(3)°, and Z = 1 at 100 K. The coordination geometry of each Cu atom is approximately octahedral formed by four nitrogen atoms of pyridine rings of 3-pyridylmethanol molecules in the equatorial plane and two chlorine atoms occupying the axial positions. The O—HsO, C—HsCl, and O—HsCl intermolecular hydrogen bonds and s stacking link the molecules in 3-D hydrogen-bonded coordination network. Complex 2 crystallizes in the tetragonal system, space group P4/n, with lattice parameters a = 10.464(1) Å, c = 11.339(2) Å, and Z = 2 at 217 K and a = 10.352(1) Å, c = 11.201(2) Å, and Z = 2 at 293 K. The coordination geometry of Cu atom in the [Cu(4-PM)₄Cl]⁺ ion is approximately square pyramidal formed by four nitrogen atoms of pyridine rings of 4-pyridylmethanol molecules in equatorial plane and one chlorine atom in axial position. The O—HsCl and C—HsCl intermolecular hydrogen bonds link the molecules in 2-D hydrogen-bonded coordination network.