过渡金属基MOF材料在选择性催化还原氮氧化物中的应用

选择性催化还原(SCR)技术是目前应用最广泛的工业脱硝技术,研发具有优良活性和抗毒化性能的催化剂体系是研究学者关注的重点。过渡金属氧化物和金属有机骨架(MOF)材料因其优良的氧化还原性能在脱硝领域受到了广泛关注和研究,且研究学者发现将过渡金属氧化物与MOF材料结合能够进一步提高催化剂的脱硝活性。本文综述了近年来主要应用于NH₃-SCR反应的系列单过渡金属基MOF脱硝催化剂和复合过渡金属基MOF脱硝催化剂的研究进展,阐述了过渡金属基MOF脱硝催化剂抗水抗硫中毒性能和热稳定性的强化方法,并展望了未来过渡金属基MOF脱硝催化剂的主要研究方向：综合利用不同过渡金属氧化物的特点并结合金属氧化物间的强相互作用,制备得到具有优良脱硝活性、抗水抗硫性能和热稳定性的新型过渡金属基MOF脱硝催化剂,进一步通过实验和仿真模拟相结合制备高效过渡金属基MOF脱硝催化剂以满足工业化需求。     

Ultrasensitive Electrochemical Biosensor for HPV16 Oncogene Based on Y-shaped DNA Catalytic Hairpin Assembly and Template-free DNA Extension Reaction

An ultrasensitive electrochemical biosensor for HPV16 oncogene was explored. Hairpin DNA-1, which can specifically bind with HPV16 oncogene, was fixed on the surface of gold electrode. Two hairpin DNAs underwent catalytic hairpin assembling with hairpin DNA-1 to construct Y-shaped DNA nanostructure, liberating HPV16 oncogene for target recycling. The 3’ terminus of Y-shaped DNA nanostructure was prolonged under the catalysis of terminal deoxynucleotidyl transferase. Methylene blue was adsorbed onto DNA nanostructure to generate characteristic differential pulse voltammetry signal. This signal was increased with the concentration of HPV16 oncogene, and the detection limit of HPV16 oncogene was as low as 0.19 fM.     

A lab-on-disc centrifugal microfluidic system for ultraprecise plasma separation

As the medical community puts forward higher requirements for the speed and convenience of disease diagnosis, point-of-care testing has become a hot research topic to overcome various kinds of healthcare problems. Blood test is considered to be highly sensitive and accurate in clinical diagnosis. However, conventional plasma separation system tends to be bulky and needs professional operations. Moreover, imprecise separation may cause residual biochemical substances such as blood cells to affect the detection results. In this work, to solve these problems, we designed a portable centrifugal microfluidic platform for automatic, rapid and ultraprecise blood separation. The disc consists of multichambers and multi-microchannels where a plasma reservoir and a cell reservoir are connected to each other and collinear with the center of the circle. This structure overcomes the weakness of low separation efficiency (when hematocrit increases) under the traditional blood separation structure (bifurcation structure). As a result, the proposed system achieved 99.9% plasma purity, 99.9% separation efficiency (with a blood hematocrit of 48%) and 32.5% plasma recovery rate in the 50s, which provides a strong guarantee for rapid blood diagnosis and analysis, especially in areas where medical resources are limited.     

Palladium Nanoparticles/Graphdiyne Oxide Nanocomposite with Excellent Peroxidase-like Activity and Its Application for Glutathione Detection

In this study, palladium nanoparticles loaded graphdiyne oxide (Pd/GDYO) nanocomposite were fabricated by in-situ reduction of palladium chloride in the dispersion of GDYO, and characte-rized by Raman spectra, transmission electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy. The synthesized Pd/GDYO was first found to have catalytic activities similar to those of the peroxidase enzyme, which can catalyze the oxidation of peroxidase substrate 3,3',5,5'-tetramethylbenzidine(TMB) in the presence of hydrogen peroxide(H₂O₂). Steady-state kinetic studies showed that the catalytic reaction of Pd/GDYO follows a ping-pong mechanism, and Pd/GDYO has a stronger activity to TMB with a Michaelis constant(K_m) value of 5.32×10^-4 mmol/L. Based on the shielding effect of glutathione(GSH) on the Pd/GDYO-H₂O₂-TMB reaction system, a colorimetric detection method for GSH was deve-loped with a wide linear range from 0.1 μmol/L to 40 μmol/L and a limit of detection of 0.1 μmol/L. The method was successfully applied for fast and accurate detection of GSH in injection powder drugs. It was expected that this peroxidase-like Pd/GDYO nano- composite would have wide applications in the fields of biomedicine and environmental chemistry.     

Preparation of Poly(ε-caprolactone)/Poly(ester amide) Electrospun Membranes for Vascular Repair

With adjustable amphiphilicity and anionic/cationic charge, biodegradability and biocompatibility, amino acid-based poly(ester amide)s(PEAs) have drawn attention in the research of tissue engineered vascular grafts. In this work, L-phenylalanine-based PEAs with or without L-lysine were synthesized through polycondensation, and ultrafine fibrous grafts consisted of PEAs and poly(ε-caprolactone)(PCL) in given mass ratios were further prepared via blend electrospinning. Surface characterizations by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy confirmed the chemical structure, and the wettability indicated that the prepared PCL/PEAs electrospun membranes exhibited less hydrophobic than PCL. Tensile results showed that the PCL/PEAs membranes possessed suitable mechanical properties, which could meet the requirements of artificial blood vessels. Cell culture and hemolytic tests exhibited that the PCL/PEAs electrospun membranes are biocompatible. In general, the electrospun grafts of PCL/PEAs could be applied for vascular repair.     

Preparation and photocatalytic performance research of Bi2WO6/UiO-66-NH2 composite

Bi₂WO₆/UiO-66-NH₂ photocatalysts were fabricated through solvothermal method using acetic acid as template. The photocatalytic performance of as-fabricated composites was highly improved under simulated visible light due to the addition of UiO-66-NH₂. The structural and chemical properties of the composites were characterized through FTIR, XRD, XPS, SEM, BET, UV–vis DRS and PL. After 90 min of visible light irradiation, the RhB at an initial concentration of 10 mg·L^?1 in the solution was degraded by 99.4% due to the addition of 10 mg of the composite. There was no significant decrease in the photocatalytic activity even after four rounds of cycles. The free radical capture experiments indicate that the photogenerated holes (h⁺) were the main active sites. The possible photocatalytic degradation mechanism was proposed as the specific surface area of the composite was enlarged due to the uniform distribution of UiO-66-NH₂ on the surface of Bi₂WO₆. The electron–hole pairs recombination rate was decreased due to the photogenerated electrons (e^?) on the CB of Bi₂WO₆ which can be rapidly transferred to the CB of UiO-66-NH₂ and the photogenerated holes of UiO-66-NH₂ transferred to the VB of Bi₂WO₆. Meanwhile, the RhB was directly oxidized to H₂O and CO₂ by h⁺ to achieve the purification effect.

     

黔产市售绿茶重金属的含量特征及健康风险评估

为研究黔产市售绿茶中重金属的含量分布特征及健康风险,以五个生产加工地的黔产市售绿茶为研究对象,分析其9种重金属(Pb、Cr、Cd、Hg、Cu、Zn、Mn、Ni和As)含量,利用美国环境保护署(USEPA)推荐的健康风险评价模型进行人体重金属的健康风险评价。结果表明,五种茶叶中Cr、Cd、Pb、Hg、Cu和As含量均低于国家限量标准。黔产市售绿茶的重金属浸出率大小次序为Zn>Mn>Hg>As>Cd>Pb>Cr>Cu>Ni。健康风险评价结果表明,五个产地的绿茶中重金属通过饮茶途径所产生的健康危害个人年风险大小次序为Cd>As>Mn>Ni>Cr>Hg>Pb>Zn>Cu,茶叶中重金属通过饮茶途径所产生的个人健康危害年风险总和为4.33×10-6~5.73×10-6 a-1,均低于USEPA和ICRP推荐的最大可接受风险水平,表明重金属引起的健康危害极小,其对暴露人群造成的健康危害可忽略不计,绿茶中重金属均处于安全范围内。     

Mn4+、Zr4+掺杂ScTaO4深红色荧光粉的制备及发光性质的研究

采用高温固相法制备了Mn4+单掺及Mn4+ - Zr4+共掺杂ScTaO4发光材料。利用X射线粉末衍射(XRD)、扫描电镜(SEM)、电子顺磁共振（EPR）以及光致发光光谱(PL)等手段研究了样品的结构、形貌、锰离子价态以及光致发光性质等。详细研究了掺杂Mn离子的价态、Mn离子发光的浓度猝灭和温度猝灭机理。研究发现Mn掺杂的ScTaO4荧光粉在655 nm处有较强的深红色发光,该发射来自Mn4+的2Eg → 4A2g跃迁。当Sc1-xTaO4: xMn4+中Mn4+离子掺杂浓度x为0.005,此时发光强度最大。Mn4+、Zr4+共掺不仅能有效提高Mn4+的发光强度而且可以减小其温度猝灭效应。Zr4+共掺杂造成的发光特性改变,为新型Mn4+掺杂荧光粉的设计和发光性能的调节提供了有价值的参考。     

Poly[[bis(pyridin‐3‐ol)manganese(II)]‐di‐μ‐pyridin‐3‐olato]

In the title complex, [Mn(C₅H₄NO)₂(C₅H₅NO)₂]_n or [Mn(μ‐3‐PyO)₂(3‐PyOH)₂]_n (3‐PyO⁻ is the pyridin‐3‐olate anion and 3‐PyOH is pyridin‐3‐ol), the Mn^II atom lies on an inversion centre and has octahedral geometry, defined by two N atoms and two deprotonated exocyclic O atoms of symmetry‐related pyridin‐3‐olate ligands [Mn—N = 2.3559 (14) Å and Mn—O = 2.1703 (11) Å], as well as two N atoms of terminal 3‐PyOH ligands [Mn—N = 2.3482 (13) Å]. The Mn^II atoms are bridged by the deprotonated pyridin‐3‐olate anion into a layer structure, generating sheets in the (01) plane. These sheets are linked by O—H⋯O hydrogen bonds. There are also π–π and C—H⋯π interactions in the crystal structure.     

Synthesis, Crystal Structure and Properties of [Co(1,3- bdoaH)2·4H2O] ·4H2O with Benzene-1,3-dioxyacetate Ligand

The cobalt(II) complex C20H34O20Co has been synthesized and characterized by elemental analysis, IR, TG and single-crystal X-ray diffraction. The crystal belongs to triclinic, space group P with a = 5.1374(10), b = 10.519(2), c = 12.913(3) (A), α = 86.89(3), β = 79.94(3), γ = 86.74(3)o, V = 685.3(3) (A)3, Z = 1, Mr = 653.40, Dc = 1.583 g/cm3, μ = 0.717 mm-1, F(000) = 341, the final R = 0.0657 and wR = 0.1141 for 1900 observed reflections with I > 2σ(I). The cobalt ion is six-coordinated by two O atoms of different 1,3-bdoaH- ligands and four water molecules, residing in an octahedral environment. The intermolecular hydrogen bonds form a 3-D supramolecular network structure.