Comparison of the elastic and inelastic scatterings between152Sm+12C and148 Nd+16O

Angular distributions of elastic and inelastic scattering have been measured for¹⁵²Sm+¹²C at 63.2 MeV and¹⁴⁸Nd+¹⁶O at 90.9 MeV. An evident interference pattern in the inelastic scattering has been observed for the first time in a strong Coulomb coupling system.We are indebted to Dr. S. Pieper for supplying the Ptolemy Program. One of us (Chenglie Jiang) would like to acknowledge the Argonne National Laboratory for the opportunity given, to perform theoretical calculations with the code Ptolemy during his visit there. Thanks are also due to Mr. H. Folger (GSI, Germany) for supplying the targets. This work was supported in part by China National Nature Science Fundation.     

停流流动注射-化学发光法测定碘盐中的碘酸根

基于在酸性介质中 ,IO-3 与 I-快速反应产生 I2 ,I2 氧化 Luminol产生化学发光反应的机理 ,建立了Luminol- IO-3 偶合发光体系测定微量 IO-3 的方法。本法测定 IO-3 的线性范围为 5 .0× 10 -8- 3.0× 10 -5g/m L;检出限为 5 .0× 10 -8g/m L ;该法中的采样、停流和进样都由计算机自动控制 ,操作简便 ,灵敏度高 ,选择性好。应用于含碘食盐中微量 IO-3 的测定 ,结果令人满意     

The optimum configuration for the third-harmonic generation of 1.064 μm in a YCOB crystal

A method of determining the spatial configuration of a YCa₄O(BO₃)₃ (YCOB) crystal is introduced. The type-I phase-matching points for the sum-frequency of 1.064 μm and 0.532 μm, as well as the conversion efficiency for YCOB samples cut in different directions, have been measured. When the input intensity is 0.76 GW/cm², the third-harmonic generation (THG) conversion efficiency for the (106°, 77.2°)-cut YCOB crystal reaches 26.2%, which is the highest that we know so far. Both the calculations and the experiments show that the optimum THG configuration for a YCOB crystal is near (106°, 77.2°), or other equivalent directions in space. Received: 11 September 2000 / Revised version: 25 January 2001 / Published online: 27 April 2001     

Growth of highly disordered InGaP on (100) GaAs by molecular beam epitaxy with a GaP decomposition source

High-quality, lattice-matched InGaP on exact (100) GaAs was successfully grown by molecular beam epitaxy with a GaP decomposition source. The ordering parameter (η) of the InGaP is investigated as a function of the growth temperature. η is as low as 0.22 and almost insensitive to the growth temperature below 460 °C. It increases abruptly around 475 °C and has a maximum value of 0.35 at ≈490 °C. Double crystal X-ray diffraction and a low-temperature photoluminescence spectrum reveal that the present growth method is robust and provides better quality InGaP compared to other state-of-the-art growth technologies. Received: 20 November 2000 / Accepted: 27 January 2001 / Published online: 21 March 2001     

FORM INVARIANCE OF APPELL EQUATIONS

The form invariance of Appell equations of holonomic mechanical systems under the infinitesimal transformations of groups is studied. The definition and the criterion of the form invariance of Appell equations are given. This form invariance can lead to a conserved quantity under certain conditions.     

High-power microwave generation using a ferroelectric cathodeelectron gun

A two-stage 500 kV 200-A ferroelectric electron gun has been designed, fabricated, tested, and used in a high power microwave amplifier experiment. We report on the operational characteristics of the gun including measurements of the beam dynamics. The optimum conditions for application of the trigger and its timing are also reported. Faraday cup measurement shows that the beam radius is 4.1 mm, in good agreement with simulation. The gun is designed for use in traveling-wave tube amplifiers, and testing of an X-band amplifier driven by the gun is reported. A peak output power of 5.9 MW has been observed from a single stage amplifier driven by a 100 A. 450 kV beam. This corresponds to energy converging efficiency of 13.1% and is the first observation of high power (~MW) microwave generation using the beam generated from a ferroelectric cathode,     

激光抽运极化原子束磁偏转铀浓缩方案

将激光抽运选择性极化原子束磁偏转方案用于铀同位素浓缩,考察了铀原子基态各子能级的磁偏转特性,提出了选择性光轴运极化的实验方案,讨论了可能得到的浓缩结果。     

增殖剂球床载气体流动特性

增殖剂球床是聚变堆或混合堆产氚包层可选结构之一,准确把握增殖剂球床中载带气体的流动特性有助于提高对球床载氚过程的认识并优化包层设计。采用离散元程序PFC3D模拟增殖剂小球的填充行为,在球床内不同位置随机截取不同尺寸的控制体,利用布尔运算中的"差集"得到孔隙范围,建立孔隙分布的三维几何模型,进一步划分网格并用计算流体力学(CFD)方法求解,得出控制体上单位长度的压降以及单元体内的速度分布特征,计算结果发现载带气体速度分布与γ分布很类似,且只要选取恰当的控制体,通过计算流体力学方法可以较好地分析整个球床孔隙内流体的流动,有利于进一步研究载氚及相关过程。     

Fast proton conduction path in {\text{Ni}} - {\text{BaCe}}_{{0.8}} {\text{Y}}_{{0.2}} {\text{O}}_{{2.9 - \delta }} membrane

The effect of metal-to-oxide grain boundary layer in $ {\text{Ni}} - {\text{BaCe}}_{{0.8}} {\text{Y}}_{{0.2}} {\text{O}}_{{3 - \delta }} $ (BCY) cermet membrane on hydrogen permeation was studied by applying the different size of oxide grain on Ni-BCY membranes. Two types of cermet membranes having different grain size of oxide were prepared by using different starting particle size of oxide powder. The hydrogen flux of coarse-oxide-grain membrane showed higher flux than that of small-oxide-grain membrane. It was understood that the negative potential at metal-to-oxide grain boundary, reference to the bulk oxide ( $ \phi _{0} < \phi _{\infty } = 0 $ ), was developed, and the accumulation of the effectively positively charged protons may occur at the grain boundary layer (space charge layer), which may result in providing highly conductive proton path by shifting the charge neutrality condition from $ {\left[ {OH^{ \bullet }_{O} } \right]} = {\left[ {Y^{/}_{{Ce}} } \right]} $ to $ {\left[ {OH^{ \bullet }_{O} } \right]} = n $ .     

ErP5O14非晶中从0秒到稳态的粒子数变化过程和发光强度

分别对五磷酸盐非晶材料(ErP5O14)在979.3,803.8,521.8,450.0,405.5和378.5nm等光激发下所有能级的动力学过程在改进能量传递理论前后进行了数值模拟比较。结果发现,应用改进后的能量传递速率进行计算模拟的结果才是合理的,其中在521.8,450.0和378.5nm光激发ErP5O14非晶时,4I 13/2→4I 15/2和4I 11/2→4I 15/2跃迁的相对荧光强度的比值分别是979.3nm光激发的2.11倍,2.82倍和2.99倍,均存在有效的4I 13/2→4I 15/2跃迁的红外量子剪裁效应。该研究对于提高锗太阳能电池的转换效率具有潜在的应用前景。