Dynamic scanning force microscopy study of self-assembled DNA-protein nanostructures

Self-assembled oligomeric nanostructures consisting of bisbiotinylated DNA fragments connected by the protein streptavidin (STV) are studied by dynamic scanning force microscopy (SFM) operating in air. A comparison of the images taken in repulsive and attractive regimes is systematically made on DNA and STV structures. Stable and reproducible SFM images are obtained in the attractive regime by using a special feedback circuit, called Q-control. On the other hand, when SFM is operating in the repulsive regime, deformation of the structures that reduce the resolution and the image quality are clearly observable. The heights of both DNA and STV have been measured as a function of the tip/molecule interaction forces. This study offers the possibility to suggest a different mechanical behavior of DNA with respect to STV. Received: 24 July 2001 / Accepted: 3 December 2001 / Published online: 4 March 2002     

Polling systems in heavy traffic: Exhaustiveness of service policies

We study the expected delay in cyclic polling models with general ‘branching-type’ service disciplines. For this class of models, which contains models with exhaustive and gated service as special cases, we obtain closed-form expressions for the expected delay under standard heavy-traffic scalings. We identify a single parameter associated with the service discipline at each queue, which we call the ‘exhaustiveness’. We show that the scaled expected delay figures depend on the service policies at the queues only through the exhaustiveness of each of the service disciplines. This implies that the influence of different service disciplines, but with the same exhaustiveness, on the expected delays at the queues becomes the same when the system reaches saturation. This observation leads to a new classification of the service disciplines. In addition, we show monotonicity of the scaled expected delays with respect to the exhaustiveness of the service disciplines. This induces a complete ordering in terms of efficiency of the service disciplines. The results also lead to new rules for optimization of the system performance with respect to the service disciplines at the queues. Further, the exact asymptotic results suggest simple expected waiting-time approximations for polling models in heavy traffic. Numerical experiments show that the accuracy of the approximations is excellent for practical heavy-traffic scenarios. This revised version was published online in June 2006 with corrections to the Cover Date.     

四（对-羟基苯基）卟啉氧合配合物的室温固相合成，表征及氧合能力

采用固相反应合成了四羟基苯基卟啉与与Fe^2＋,Co^2＋金属离子的配合物,在室温下,将其与分子O2作用,提纯后得到两种固态氧合配合物．通过元素分析、红外光谱（IR）、核磁共振氢谱（^1HNMR）、电导、热分析（TG／DTA）、紫外光谱（UV）等测试手段确定了氧合配合物的组成为[Co·THPP·O2]（NO3）2·2H2O、[Fe·THPP·O2]Cl2·2H2O]，可知1mol配合物吸收了1molO2,采用失重法测定了氧合配合物中的配位氧,确定1mol金属配合物吸收1molO2形成超氧配合物．     

Effect of nitrogen surface doping on the work function and field emission of hydrogenated amorphous carbon films

The effect of nitrogen surface doping on the electron field emission characteristics of hydrogenated amorphous carbon films was studied. It was found that the emission threshold electric field decreased after nitrogen surface doping which indicated the reduction of the emission barrier at the film surface. It was demonstrated that this improvement arose from the decrease of the effective work function due to the formation of a dipole layer induced by chemical termination and chemical structural change on the film surface. PACS 52.75.Xx; 73.30 +y; 73.61.Jc     

非晶硅薄膜的低温快速晶化及其结构分析

在镀铝的廉价玻璃衬底上高速沉积的非晶硅薄膜在不同的温度下退火10min.退火温度为500℃时,薄膜表面形成了硅铝的混合相,非晶硅薄膜开始呈现了晶化现象 退火温度为550℃时,大部分(约80%)的非晶硅晶化为多晶硅,平均晶粒尺寸为500nm 退火温度为600℃时,几乎所有的非晶硅都转化为多晶硅,其平均晶粒尺寸约为15μm.     

二维光电位置敏感器件的非线性修正

根据二维光电位置敏感器件 (PSD)的工作原理 ,分析了影响PSD线性度的主要因素 ,提出了一种用神经网络对PSD进行非线性修正的方法。以PSD的输入输出数据对作为样本训练的神经网络 ,利用神经网络所具有地能够以任意精度逼近非线性函数的能力 ,实现PSD的输出与实际光点位置之间的映射 ,在神经网络的输出端得到线性响应。该方法的优点是不需要很大的数据存储量即可得到很好的修正效果。结果表明 ,修正后的PSD能在较宽的位置范围内输出高线性度的信号     

Characterization of surface deformation around Vickers indentations in InGaAsP epilayers on InP substrate

The deformation surrounding Vickers indentations on InGaAsP/InP epilayers have been studied in detail. The surface topography was characterized by using atomic force microscopy (AFM). The material pile-up and sink-in regions around the indentation impression was observed for the quaternary InGaAsP/InP epilayers. The sectional analysis mode of the AFM shows the depth profile at the indented region. Microindentation studies were carried out for different atomic fraction of the quaternary InGaAsP/InP compound semiconductor alloys. The microhardness values of InGaAsP/InP epilayers were found to be in the range of 5.08 and 5.73 GPa. These results show that the hardness value of the quaternary alloy drastically increases as the composition of As was increased by 0.01 atomic fraction and when the phosphorous concentration decreases from 0.4 to 0.38. The reason may be that the increase in As concentration hardens the lattice when phosphorous concentration was less and hardness decreases when phosphorous was increased.     

Compact, reliable asymmetric optical configuration for cost-effective fabrication of multiplex dot matrix hologram in anti-counterfeiting applications

This study presents a compact optical configuration that can generate a multiplex dot-matrix hologram with complex interlaced images for anti-counterfeiting applications on valuable paper. Varying the orientation of the interference plane can enable the multiplex hologram to be recorded without changing the interference angle of two laser beams. With its simple asymmetric optical setup, a multiplex hologram with many interlaced images can be efficiently fabricated, increasing the cost of imitation. Experimental details of the asymmetric optical setup are also described.     

The Tolerance of All-Optical Switching Based on Cascaded Second-Order Nonlinearity in PPLN APE Waveguide

Based on solving the couple mode equation numerically, the characterization of the signal power on the gate power was analyzed. And the relationship of the tolerance of the grating period and the bulk temperature on the interaction length was analyzed.