Characterization and determination of the thermodynamic and kinetic properties of p-CP adsorption onto organophilic bentonite from aqueous solution

The characterization of tetraethylammonium bentonite and the adsorption of p-chlorophenol (p-CP) onto organophilic bentonite (tetraethylammonium bentonite) was studied as a function of the solution concentration and temperature. The observed adsorption rates were found to fit first-order kinetics. The rate constants were calculated for temperatures ranging between 15.0 and 35.0 degrees C at constant concentration. The adsorption energy E and adsorption capacity q(m) for the phenolic compound adsorbing on organophilic bentonite were estimated using the Dubinin-Radushkevic equation. Thermodynamic parameters (Deltag(a), Deltah(a), Deltas(a)) were calculated by a new approximation from the isotherms of p-CP adsorption on organophilic bentonite. These isotherms were modeled according to Freundlich and Dubinin-Radushkevic adsorption isotherms. The amount of adsorption of p-chlorophenol on organophilic bentonite was found to be dependent on the relative energies of adsorbent-adsorbate, adsorbate-solvent, and adsorbate-adsorbate interactions.     

A novel (E,E)-dioxime and its mono-, di- and trinuclear complexes bearing tetradentate octyl sulfanyl phenylamino substituents. Synthesis,characterization and electrochemical properties of its transition metal complexes

A new vic-dioxime, 13,14-bis-(hydroxyimino)-9,12,15,18-diazadithiaoctacosane, has been synthesized from 2-octylsulfanylaminobenzene and (E,E)-dichloroglyoxime. Mononuclear transition metal complexes of Ni^II, Cu^II, Co^II and Fe^II have been prepared and were found to have a metal–ligand ratio of 1:2. The synthesis of di- and trinuclear complexes was achieved with U^IVO₂ and Cu^II depending on the stoichiometry of the reactants. The complexes were characterized by elemental analysis, ¹H-n.m.r., u.v.–vis, i.r., f.a.b.-m.s. and by cyclic voltammetry.     

A Grafting Study on Partially Dehydrochlorinated Poly(vinyl chloride) by Atom Transfer Radical Polymerization

HCl elimination in low ratio was first carried out from poly(vinyl chloride) to increase allylic chlorines. Partially dehydrochlorinated poly(vinyl chloride), having a macroinitiator effect, was grafted with tert‐butyl methacrylate via atom transfer radical polymerization in the presence of CuBr/2,2′‐bipyridine at 64°C in tetrahydrofuran. Original poly(vinyl chloride) was also grafted with tert‐butyl methacrylate under the same conditions to compare with that of partially dehydrochlorinated poly(vinyl chloride). The graft copolymers were characterized by elemental analysis, FTIR, ¹H and ¹³C‐NMR, differential scanning calorimetry, and gel permeation chromatography (GPC). Thermal stabilities of the graft copolymers were investigated by thermogravimetric analysis as compared with those of the macroinitiators.     

Complexation of Hg2+ with α‐Lipoic and Dihydrolipoic Acids: Study by Differential Pulse Voltammetry on Rotating Au‐Disk Electrode and ESI‐MS

The complexation of the natural antioxidants α‐lipoic acid (ALA) and its reduced form dihydrolipoic acid (DHLA) with Hg²⁺ was investigated by a recently proposed differential pulse voltammetric (DPV) method using the rotating Au‐disk electrode. Complexation processes are proposed from the multivariate curve resolution by alternating least squares (MCR‐ALS) analysis of DPV titration data. Main complexes were both 1 : 1 Hg : ALA and Hg : DHLA, although the formation of 1 : 2 complexes can be also deduced. ALA and DHLA show different Hg²⁺‐binding patterns at different pH. Voltammetric findings are completed with the data obtained by electrospray ionization mass‐spectrometry (ESI‐MS), especially in negative mode.     

Stripping analysis of heavy metals in tap water using the bismuth film electrode

A commercially available screen-printed carbon electrode coated with an ex situ deposited bismuth film (BiSPCE) has been applied to the determination of Pb(II) and Zn(II) ions in tap water (Barcelona water distribution network) by means of stripping voltammetry (SV) and stripping chronopotentiometry (SCP). A good reproducibility of the measurements and a satisfactory agreement between SV and SCP data were observed for both heavy metal ions. Although, in principle, the procedure could be also suited to the determination of Cd(II), this species was not detected. The results were also consistent with the routine ICP-OES measurements of the water distribution company, thus confirming the potential usefulness of such BiSPCE disposable devices for the analysis of heavy metals in natural waters.      

Exergoeconomic analysis of a thermochemical copper–chlorine cycle for hydrogen production using specific exergy cost (SPECO) method

The manner is investigated in which exergy-related parameters can be used to minimize the cost of a copper–chlorine (Cu–Cl) thermochemical cycle for hydrogen production. The iterative optimization technique presented requires a minimum of available data and provides effective assistance in optimizing thermal systems, particularly in dealing with complex systems and/or cases where conventional optimization techniques cannot be applied. The principles of thermoeconomics, as embodied in the specific exergy cost (SPECO) method, are used here to determine changes in the design parameters of the cycle that improve the cost effectiveness of the overall system. The methodology provides a reasonable approach for improving the cost effectiveness of the Cu–Cl cycle, despite the fact that it is still in development. It is found that the cost rate of exergy destruction varies between $1 and $15 per kilogram of hydrogen and the exergoeconomic factor between 0.5 and 0.02 as the cost of hydrogen rises from $20 to $140 per GJ of hydrogen energy. The hydrogen cost is inversely related to the exergoeconomic factor, plant capacity and exergy efficiency. The results are expected to assist ongoing efforts to increase the economic viability and to reduce product costs of potential commercial versions of this process. The impact of the results are anticipated to be significant since thermochemical water splitting with a copper–chlorine cycle is a promising process that could be linked with nuclear reactors to produce hydrogen with no greenhouse gases emissions, and thereby help mitigate numerous energy and environment concerns.     

Single crystal X-ray structure and optical properties of anthraquinone-based dyes

This study focuses on the preparation, single crystal X-ray diffraction, characterization, and optical properties of some anthraquinone-based dyes. The anthraquinone-based antimicrobial dye N-{2-[(9,10-dioxo-9,10-dihydroanthracen-1-yl)amino]-2-oxoethyl}-N,N-dimethylbutan-1-aminium chloride monohydrate (III) was obtained from 1-aminoanthraquinone (I) via 2-chloro-N-(9,10-dioxo-9,10-dihydroanthracen-1-yl)acetamide (II) using known preparation and characterization methods. Single crystal X-ray diffraction analysis of III revealed a monoclinic system, space group P2₁/n, Z = 4. Photoluminescence properties of anthraquinone dyes I–III were also investigated. These dyes gave an intense emission (λ_max = 341 nm) upon the irradiation by UV light and showed photoluminescence quantum yields of 73 %, 66 %, and 61 % with long excited-state lifetimes of 6.87 ns, 6.14 ns, and 5.69 ns, respectively. These anthraquinone dyes are of interest as an organic light emitting material for electroluminescent devices.     

Synthesis, characterization and biological evaluation of a novel Cu(II) complex with the mixed ligands 2,6-pyridinedicarboxylic acid and 2-aminopyridine

A novel bridged binuclear Cu(II) complex with mixed ligands, di-μ-(2-aminopyridine(N,N′))-bis[(2,6-pyridinedicarboxylate)aquacopper(II)] tetrahydrate, formulated as [Cu(μ-ap)(dipic)(H₂O)]₂·4H₂O (1) (dipic = 2,6-pyridinedicarboxylate, ap = 2-aminopyridine), has been synthesized and characterized by elemental, spectral (IR and UV–Vis.), thermal analysis, magnetic measurements and single crystal X-ray diffraction analysis. The central Cu(II) ion resides on a centre of symmetry in a distorted square-pyramid coordination environment comprising of two N atoms, one from dipic and one from the ap ring, two carboxylate O atoms from dipic, and one O atom from water. Intermolecular N–HO and O–HO hydrogen bonds and π–π stacking interactions seem to be effective in the stabilization of the crystal structure. The free ligands and the complex were also evaluated for their antimicrobial and radical scavenging activities (DPPH = 1,1-diphenyl-2-picrylhydrazyl hydrate) using in vitro microdilution methods. Antimicrobial screening of the free ligands and their complex showed that the free ligands and the complex possess antifungal activity against Candida sp.     

Enthalpic relaxation of convective desiccated trehalose-water glasses

Minimizing molecular mobility for desiccation preservation of biologics close to ambient temperature using trehalose glasses require quantitative characterization of their enthalpic relaxation at various end water contents. Differential scanning calorimetry (DSC) was used to characterize three different water contents: 0%, 1.5% and 10% over a wide range of aging temperatures. Results showed the characteristic time (τ) varies both with the water content and the aging temperature. τ increased with lowered aging temperature but showed a non-monotonous relationship as a function of water content. Fragility of trehalose glasses was analyzed using thermophysical parameters obtained from relaxation studies. The study showed trehalose to be a fragile glass former at all water contents, with 0% water samples showing a relatively stronger glass. A compromise between molecular mobility and glass fragility led to an optimal water content close to 1.5% and an aging temperature close to room temperature. This would ensure a τ value of 9000 h, which corresponds to a storage period of a year.     

Synthesis, characterization, thermal stability and electrochemical properties of poly-4-[(2-methylphenyl)iminomethyl]phenol

In this study, the reaction conditions of poly-4-[(2-methylphenyl)iminomethyl]phenol (P-2-MPIMP) were studied by using oxidants such as air O₂, H₂O₂ and NaOCl in an aqueous alkaline medium between 50 and 90 °C. The structures of the synthesized monomer and polymer were confirmed by FT-IR, UV-vis, NMR and elemental analysis. The characterization was made by TG-DTA, size exclusion chromatography (SEC) and solubility tests. At the optimum reaction conditions, the yield of poly-4-[(2-methylphenyl)iminomethyl]phenol (P-2-MPIMP) was found to be 20% (for air O₂ oxidant), 33% (for H₂O₂ oxidant), and 74% (for NaOCl oxidant). According to the SEC analysis, the number-average molecular weight (M_n), weight-average molecular weight (M_w) and polydispersity index (PDI) values of P-2-MPIMP were found to be 3300, 4100 g mol⁻¹ and 1.242, using H₂O₂, and 4550, 5150 g mol⁻¹and 1.132, using air O₂ and 5300, 5850 g mol⁻¹ and 1.104, using NaOCl, respectively. According to TG analysis, the weight losses of 4-[(2-methylphenyl)iminomethyl]phenol (2-MPIMP) and P-2-MPIMP were found to be between 75.29% and 48.17% at 1000 °C, respectively. P-2-MPIMP was shown to have a higher stability against thermal decomposition. Also, electrical conductivity of the P-2-MPIMP was measured, showing that the polymer is a typical semiconductor. Electrochemically, the highest occupied molecular orbital (HOMO), the lowest unoccupied molecular orbital (LUMO) and electrochemical energy gaps ( of 2-MPIMP and P-2-MPIMP were found to be −6.01, −6.03; −2.63, −2.82; 3.38 and 3.21 eV, respectively. According to UV-vis measurements, the optical band gap (E_g) of 2-MPIMP and P-2-MPIMP was found to be 3.40 and 2.97 eV, respectively.