Synthesis of 2,3‐Dihydro‐4H‐furo[3,2‐c] chromen‐4‐ones and 2,3‐Dihydronaphtho[2,3‐b]furan‐4,9‐diones by the Radical Cyclizations of Hydroxyenones with Electron-Rich Alkenes using Manganese(III) Acetate

We have obtained dihydrofurans 3a–j in the radical cyclization of 4‐hydroxycoumarin 1a and 2‐hydroxy‐1,4‐naphtoquinone 1b with electron rich alkenes 2a–i by manganese(III) acetate. Methods A and B, which have different molar ratios were studied comparatively in these reactions, and we observed that method B (molar ratio 2:1:3) gave the best results. Treatment of 4‐hydroxycoumarin 1a and electron rich alkenes 2a–e gave 2,3‐dihydro‐4H‐furo[3,2‐c]chromen‐4‐ones 3a–e in 36–86% yields by the method B. Under the same conditions, the reactions of 2‐hydroxy‐1,4‐naphtaquinone 1b with conjugated alkenes 2b and 2f–i afforded 2,3‐dihydronaphtho[2,3‐b]furan‐4,9‐diones 3f–j in an excellent yields.     

Stereoconvergent Generation of a Contrasteric syn‐Bicyclopropylidene (=syn‐Cyclopropylidenecyclopropane) by Stille‐Like Coupling

Stereoisomerically pure endo‐ and exo‐7‐halo‐7‐(trimethylstannyl)benzonorcar‐3‐enes (=endo‐ and exo‐(1‐halo‐1a,2,7,7a‐tetrahydro‐1H‐cyclopropa[b]naphthalen‐1‐yl)trimethylstannane) 4 and 6 were selectively obtained by lithium? tin or magnesium? tin transmetalation in good yields (Scheme 2 and 3). The reaction of these compounds with copper(I) thiophene‐2‐carboxylate (CuTC) produced in both cases the corresponding C_S‐symmetric bicyclopropylidene (=cyclopropylidenecyclopropane) syn‐ 1 , a single diastereoisomer (Schemes 5 and 6). The structure of syn‐ 1 was undoubtedly elucidated by X‐ray single crystal diffraction. The coupling mechanism of the carbenoid cyclopropane is discussed (Scheme 7).     

Magnesium Bromide and Magnesium Chloride Hexahydrate Catalyzed One‐Pot Synthesis of Dihydropyrimidines via Biginelli Reaction under Solvent‐Free Conditions

Biologically important 12 new important 3,4‐dihydropyrimidin‐2‐(1H)‐ones (‐thiones) were synthesized with in one‐pot three‐component Biginelli reaction from the corresponding aromatic aldehydes (5‐methyl‐2‐thiophenecarboxaldehyde and 2‐chloro‐5‐nitrobenzaldehyde), β‐keto esters (ethylacetoacetate, allylacetoacetate, and t‐butylacetoacetate), and urea/thiourea in the presence of catalytic amount of magnesium bromide and magnesium chloride hexahydrate as nontoxic, inexpensive, and easily available catalysts under solvent‐free conditions at 80 and 100°C. Compared with the catalyst‐free three‐component Biginelli reaction conditions, this method consistently has the advantage of short reaction time (45–100 min) and good to excellent yields (75–91%).     

4-hydroxy-2H-1,2-benzothiazine-3-carbohydrazide 1,1-dioxide-oxalohydrazide (1:1): X-ray structure and DFT calculations

The title compound, 4-hydroxy-2H-1,2-benzothiazine-3-carbohydrazide 1,1-dioxide-oxalohydrazide (1:1), is determined using X-ray diffraction techniques and the molecular structure is also optimized at the B3LYP/6-31G(d,p) level using density functional theory (DFT). The asymmetric unit consists of four independent molecules. The oxalohydrazide molecules have the centre of symmetry at the mid-point of the central C-C bond. Each thiazine ring adopts a half-chair conformation. Intermolecular C-H...O, N-H...O and N-H...N hydrogen bonds produce R ₂ ² (10), R ₂ ² (13), R ₃ ³ (12) and R ₃ ³ (15) rings, which lead to one-dimensional polymeric chains. An extensive three-dimensional supramolecular network of N-H...N, N-H...O, C-H...O and O-H...O hydrogen bonds is responsible for crystal structure stabilization.     

Synthesis of C 2-Symmetric Chiral Amino Alcohols: Their Usage as Organocatalysts for Enantioselective Opening of Epoxide Ring

A series of β-amino alcohols derivatives were synthesized from (R)-2-amino-1-butanol and (S)-1,2-propanediol, and they have been used as organocatalaysts in the racemic ring opening of epoxide in good yields with high enantiomeric excess (up to 97%).     

Interaction of Sodium Dodecyl Sulfate with Poly(ethyleneimine) in Bulk Solution and at the Air-Solution Interface

Interaction of sodium dodecyl sulfate (SDS) with the cationic polyelectrolyte poly(ethyleneimine) (PEI) was investigated in this study. Turbidity measurements were performed in order to analyze the interaction and complex formation in bulk solution as a function of polymer concentration and pH. Surface tension measurements were made to investigate the properties of SDS/PEI/water mixtures at air/solution interface. Results revealed that SDS/PEI complexes form in solution depending on the surfactant and polymer concentration. A decrease was observed in surface tension values in the presence of SDS/PEI mixtures compared to the values of pure SDS solutions. Both solution and interfacial properties exhibited pH dependent behavior. A shift was seen in the critical micelle concentration of SDS solutions as a function of PEI concentration and solution pH. Monovalent and divalent salt additions showed some influence on the interfacial properties of SDS solutions in the presence of PEI.     

Cloud point extraction of aluminum (III) in water samples and determination by electrothermal atomic absorption spectrometry,flame atomic absorption spectrometry and UV-visible spectrophotometry

Cloud point extraction was applied as a preconcentration step for the determination of trace level of Al(III) in water samples with electrothermal atomic absorption spectrometry (ETAAS), flame atomic absorption spectrometry (FAAS) and UV-visible spectrophotometry. The aluminum was extracted as aluminum-Eriochrome Cyanine R (ECR) complex, at pH 6 by micelles of the non-ionic surfactant octylphenoxypolyethoxyethanol (Triton X-114). The investigations showed that the same CPE procedure can be used for different detection techniques. The results obtained from these techniques were evaluated. Under the optimal conditions, limit of detection obtained with ETAAS, FAAS and UV-visible spectrophotometry were 0.03 ng mL^?1, 0.06 µg mL^?1 and 0.01 µg mL^?1, respectively. The accuracy of the procedure was tested by analysing certified reference material. The method was successfully applied to determination of aluminum in water samples and dialysis fluid.     

Selective back-extraction and preconcentration of zinc(II) from metal-1,3,5-triketone extracts prior to its determination by flame atomic absorption spectrometry

A simple back-extraction method was developed for the separation and preconcentration of trace levels of zinc from different matrices. Ethyl-2-(4-methoxybenzoyl)-3-(4-methoxyphenyl)-3-oxopropanoylcarbamate (EMPC) was used as a new complexing agent for the extraction of zinc(II) from the aqueous sample phase to the methyl isobutyl ketone (MIBK) phase as Zn(EMPC)₂ complexes. The Zn(II) can be selectively stripped with 1?mL of 0.5?mol?L^?1 HCl from Mⁿ⁺(EMPC)_n complexes [Ag(I), Al(III), Cd(II), Cr(III), Cu(II), Fe(II), Fe(III), Mn(II), Ni(II), Pb(II) and Pd(II)] which dissolved in MIBK phase. Some experimental parameters, which are important for the whole extraction process, including pH, sample volume, shaking time, amount of the EMPC reagent, amount of MIBK, ionic strength, and type of back-extractant were investigated. The recovery for Zn(II) was greater than 95%. The detection limit of the method was found to be 0.2?µg?L ^{? 1} and the relative standard deviation as 6.4%. The concentrations of Zn(II) in the certified reference materials (LGC6019 river water and NIST-1547 peach leaves) by the presented method were in good agreement with the certified values. The proposed method was succesfully applied to the determination of zinc in some natural waters, rice, hair, soil, and tea samples.     

Synthesis of melamine based polymer complexes and their thermal degradations and magnetic properties

In this study, new polymer Fe(III) and Cr(III) complexes were synthesized. These polymer complexes were characterized by using elemental analysis, FT-IR spectroscopy, MS, thermal analyses and magnetic susceptibility measurement technics. Their thermal degradations were investigated, and co-polymerization was compared to aliphatic polymerization by using 1,2-dibromomethylbenzene and o-phenylenedialdehyde. Finally, metal ratios of the complexes were determined by using atomic absorption spectroscopy. The complexes are distorted octahedral low-spin (S = 1/2) Fe(III) and distorted octahedral (S = 3/2) Cr(III) bridged by COO^? and catechol groups.