Light charged particle emission and fission in238U+238U collisions at 1,740 MeV

Inclusive⁴He and⁴H energy spectra and heavy fragment coincidence correlations have been measured for reactions of 7.31 MeV/u²³⁸U with²³⁸U and^?197Au targets. The H/He production cross sections are in the range 15–26 mb, and their emission spectra are very similar for the two systems. The observed strong kinematic shifts with angle are reproduced in shape and magnitude by Monte Carlo simulations of particle evaporation from projectile-like and target-like fragments, indicating competition between charged particle emission and sequential fission. No evidence is found for high energy charged particle emission associated with ultra-highZ composite systems. Heavy fragment measurements indicate an abundance of quasielastic and deeply inelastic reaction fragments, as well as sequential fission of target and projectile nuclei. For²³⁸U nuclei, the fission occurs predominantly in an asymmetric mode, reminiscent of fission at low excitation energy. For²³⁸+²³⁸U reactions in the vicinity of the grazing angle, the frequency of single sequential fission (with survival of the partner fragment) is twice as large as double sequential fission in which both the target and projectile undergo fission. In²³⁸U+¹⁹⁷Au reactions, the survival probability of the heavy fragments is even greater. The surprisingly high survival probabilities of high-Z fragments imply a preponderance of very soft collisions in these very-heavy-ion reactions, at least at energies not very far over the Coulomb barrier.     

Lower bounds on the cluster size distribution

We rigorously prove that the probabilityP _n that the origin of ad-dimensional lattice belongs to a cluster of exactlyn sites satisfiesP _n > exp(–n ^(d–1)/d ) whenever percolation occurs. This holds for the usual (noninteracting) percolation models for any concentrationp > p _c , as well as for the equilibrium states of lattice spin systems with quite general interactions. Such a lower bound applies also if no percolation occurs, but if it appears in some other phase of the system.     

Multilevel Deep Feature Generation Framework for Automated Detection of Retinal Abnormalities Using OCT Images

Optical coherence tomography (OCT) images coupled with many learning techniques have been developed to diagnose retinal disorders. This work aims to develop a novel framework for extracting deep features from 18 pre-trained convolutional neural networks (CNN) and to attain high performance using OCT images. In this work, we have developed a new framework for automated detection of retinal disorders using transfer learning. This model consists of three phases: deep fused and multilevel feature extraction, using 18 pre-trained networks and tent maximal pooling, feature selection with ReliefF, and classification using the optimized classifier. The novelty of this proposed framework is the feature generation using widely used CNNs and to select the most suitable features for classification. The extracted features using our proposed intelligent feature extractor are fed to iterative ReliefF (IRF) to automatically select the best feature vector. The quadratic support vector machine (QSVM) is utilized as a classifier in this work. We have developed our model using two public OCT image datasets, and they are named database 1 (DB1) and database 2 (DB2). The proposed framework can attain 97.40% and 100% classification accuracies using the two OCT datasets, DB1 and DB2, respectively. These results illustrate the success of our model.     

Spectral,electron microscopic and chemical investigations of gamma-induced purple color zonings in amethyst crystals from the Dursunbey-Balıkesir region of Turkey

Amethyst crystals on matrix specimens from the Dursunbey-Bal?kesir region in Turkey have five representative purple color zonings: dark purple, light purple, lilac, orchid, and violet. The purple color zonings have been analyzed with optical absorption spectra in the visible wavelength region, chemical full trace element analyses (inductively coupled plasma-atomic emission spectroscopy and inductively coupled plasma-mass spectroscopy), and scanning electron microscopic images with high magnification. It can be proposed that the production of the purple color in amethyst crystals is due to three dominant absorption bands centered at 375, 530, and 675 nm, respectively. In addition, the purple color zonings are also due to four minor absorption bands centered at 435, 480, 620, and 760 nm. X-ray diffraction graphics of the investigated amethyst crystals indicate that these crystals are composed of a nearly pure alpha-quartz phase and do not include any moganite silica phase and/or other mineral implications. Trace element analyses of the amethyst crystals show five representative purple color zonings, suggesting that the absorption bands can be mainly attributed to extrinsic defects (chemical impurities). However, another important factor that influences all structural defects in amethyst is likely to be the gamma irradiation that exists during amethyst crystallization and its inclusion in host materials. This gamma irradiation originates from the large underlying intrusive granitoid body in the region of amethyst formation. Irradiation modifies the valence values of the impurity elements in the amethyst crystals. It is observed that the violet-colored amethyst crystals have the most stable and the least reversible coloration when exposed to strong light sources. This situation can be related to the higher impurity content of Fe (2.50 ppm), Co (3.1 ppm), Ni (38 ppm), Cu (17.9 ppm), Zn (10 ppm), Zr (3.9 ppm), and Mo (21.8 ppm).     

Radioactivity concentrations in topsoil samples from the Thrace region of Turkey and assessment of radiological hazard

The activity concentrations of gamma emitting radionuclides were measured in surface soil samples from the Thrace region. ²³²Th, ²³⁸U, ²²⁶Ra, ⁴⁰K and ¹³⁷Cs activities and physico-chemical parameters of the soil samples were determined in samples collected from 73 sampling stations. Radionuclide concentrations measured were compared with those found in the samples from other locations of Turkey and from different countries. The average activity concentrations of ²³²Th, ²³⁸U, ²²⁶Ra, ⁴⁰K and ¹³⁷Cs were found to be 24.71 ± 8.79, 22.30 ± 7.93, 32.09±12.44, 509.00±160.05, 32.74±29.24 Bq kg^?1, respectively. The mean value of the annual effective dose equivalent from the outdoor terrestrial gamma radiation was calculated as 57.2 μ Sv.     

ESR response of gamma-irradiated sulfamethazine

In the present work, characteristic features of the radiolytical intermediates produced in gamma-irradiated solid sulfamethazine (SMH) were investigated by electron spin resonance (ESR) spectroscopy. The heights of the resonance peaks, measured with respect to the spectrum baseline, were used to monitor microwave saturation, temperature and time-dependent kinetic features of the radical species contributing to the formation of recorded experimental ESR spectra. Three species having different spectroscopic and kinetic features were observed to be produced in gamma-irradiated SMH. SO₂, which is the most sensitive group of radiation in the SMH molecule, was found to be at the origin of radiation-produced ionic radical species. Based on the experimental results derived from the present study, the applicability of ESR spectroscopy to radiosterilization of SMH was discussed. In the dose range of interest (0.5–10 kGy), the radiation yield of solid SMH was calculated to be very low (G=0.45) compared with those obtained for sulfonamide aqueous solutions (G=3.5–5.1). Based on these findings, it was concluded that SMH and SMH-containing drugs could be safely sterilized by gamma radiation and that ESR spectroscopy could be successfully used as a potential technique for monitoring their radiosterilization.     

Room temperature magnetocaloric effect in Pr1.75Sr1.25Mn2O7 double-layered perovskite manganite system

Abstract

In this work, we have studied on double-layered perovskite (Ruddlesden–Popper) manganite structure in Pr_1.75Sr_1.25Mn₂O₇ synthesised by sol–gel method. The crystal structure of the double-layered perovskite is found as tetragonal from the X-ray diffraction analysis with I4/mmm space group. A high Curie temperature, T_C = 305 K is observed from the temperature dependence of magnetisation measurement. The isothermal magnetisation curves showed that magnetic phase transition is second order due to the positive slope of the Arrott plots. Maximum magnetic entropy change (ΔS_M) and adiabatic temperature change (ΔT_ad) values are calculated as 3.99 J kg^?1 K^?1 and 2.1 K under external magnetic field of 70 kOe, respectively. Since our double-layered perovskite manganite sample has desired T_C value and relatively high ΔS_M, it can be a potential candidate as a magnetocaloric material for room temperature magnetic cooling systems.     

Quantum Fourier Transform-Based Arithmetic Logic Unit on a Quantum Processor

This study proposes and construct a primitive quantum arithmetic logic unit (qALU) based on the quantum Fourier transform (QFT). The qALU is capable of performing arithmetic ADD (addition) and logic NAND gate operations. It designs a scalable quantum circuit and presents the circuits for driving ADD and NAND operations on two-input and four-input quantum channels, respectively. By comparing the required number of quantum gates for serial and parallel architectures in executing arithmetic addition, it evaluates the performance. It also execute the proposed quantum Fourier transform-based qALU design on real quantum processor hardware provided by IBM. The results demonstrate that the proposed circuit can perform arithmetic and logic operations with a high success rate. Furthermore, it discusses in detail the potential implementations of the qALU circuit in the field of computer science, highlighting the possibility of constructing a soft-core processor on a quantum processing unit.     

Overview of finite elements simulation of temperature profile to estimate properties of materials 3D-printed by laser powder-bed fusion

Laser powder bed fusion(LPBF),like many other additive manufacturing techniques,offers flexibility in design expected to become a disruption to the manufacturing industry.The current cost of LPBF process does not favor a try-anderror way of research,which makes modelling and simulation a field of superior importance in that area of engineering.In this work,various methods used to overcome challenges in modeling at different levels of approximation of LPBF process are reviewed.Recent efforts made towards a reliable and computationally effective model to simulate LPBF process using finite element(FE)codes are presented.A combination of ray-tracing technique,the solution of the radiation transfer equation and absorption measurements has been used to establish an analytical equation,which gives a more accurate approximation of laser energy deposition in powder-substrate configuration.When this new analytical energy deposition model is used in in FE simulation,with other physics carefully set,it enables us to get reliable cooling curves and melt track morphology that agree well with experimental observations.The use of more computationally effective approximation,without explicit topological changes,allows to simulate wider geometries and longer scanning time leading to many applications in real engineering world.Different applications are herein presented including:prediction of printing quality through the simulated overlapping of consecutive melt tracks,simulation of LPBF of a mixture of materials and estimation of martensite inclusion in printed steel.