Role of graphene in structural transformation of zirconium oxide

Fine powders of zirconium oxide (ZrO₂) were prepared using zirconium oxychloride by combustion method. The crystalline size of pure ZrO₂ was in range of 14–45 nm. Graphene was incorporated in ZrO₂ using graphene oxide as precursor and reducing it with hydrazine hydrate. X-Ray diffraction, Fourier transform infra-red spectroscopy, thermogravimetric analysis and Raman spectroscopy methods were used to characterize the samples. The role of graphene in structural transformation of ZrO₂ to monoclinic phase was clearly observed.     

Efficient Synthesis of Some New 2,3-Dimethylquinoxaline-1-oxides Using Bis(acetoxy)phenyl-λ 3-iodane as an Oxidant

A series of 2-(arylimino)-3-(hydroxyimino)butanes 3a–g, easily accessed by the condensation of variously substituted anilines 1a–g with biacetyl monoxime 2, were efficiently cyclized to afford 2,3-dimethylquinoxaline-1-oxides 4a–g using bis(acetoxy)phenyl-λ ³-iodane as an oxidant. This methodology utilizes a commercially available and environmental benign oxidant to achieve the title compounds in excellent yields under mild conditions.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Investigation of the Ionic Conduction Mechanism in Carboxymethyl Cellulose/Chitosan Biopolymer Blend Electrolyte Impregnated with Ammonium Nitrate

In the present work, an attempt has been made to prepare a new natural biopolymer blend electrolyte of carboxymethyl cellulose/chitosan impregnated with NH₄NO₃ by the solution casting technique. The conductivity for the system was measured by impedance spectroscopy. The incorporation of 40 wt.% NH₄NO₃ optimized the ambient temperature conductivity of the electrolyte up to 1.03 × 10^?5 S cm^?1. All electrolytes were found to follow the Arrhenius relationship. Dielectric studies confirmed that the electrolytes obey non-Debye behavior. The temperature dependence of the power law exponent s for the highest conducting film can be represented by the correlated barrier hopping model.     

Effect of salicin on induction and carbon catabolite repression of endoxylanase synthesis in Penicillium janthinellum MTCC 10889

Amongst various carbon sources, xylan was found to be the sole inducer of endoxylanase production by Penicillium janthinellum MTCC 10889 in submerged cultivation. Endoxylanase synthesis by a xylan induced culture was initially repressed after a simultaneous addition of xylose, probably by the inducer exclusion mechanism, but it was resumed and achieved its highest level at a much later stage of growth (at 120 h). Xylose added after 30 h of growth cannot exert its full repressive effect. Although glucose was proved to be a more potent repressor than xylose, supplementation of salicin, an alcoholic β-glycoside containing d-glucose, with pure xylan resulted in an about 3.22 fold increase in the enzyme synthesis at 72 h followed by constant high production of the enzyme at least until the 144th h of growth. Inducing capacity of salicin in a xylan induced culture was significantly reduced when it was added after 30 h of growth. Addition of salicin and xylan help to partially overcome the repressive effect of xylose and glucose. Failure of salicin in recovering the endoxylanase synthesis in actinomycin D and cyclohexamide inhibited the xylan induced culture indicating that salicin cannot initiate the de novo synthesis of the enzyme.     

An expeditious and environmentally friendly synthesis of 3-substituted isocoumarins using microwave irradiation

A microwave-assisted, environmentally friendly, high-yielding, time-saving synthesis of medicinally important 3-substituted isocoumarins was carried out in a single step by direct condensation of homophthalic acid with aryol and acyl chlorides under solvent-free conditions without any solid support. The synthesised isocoumarins were structurally characterised by microanalysis, 1H NMR, EI, IR and UV.     

ZIF‐8‐Nanocrystalline Zirconosilicate Integrated Porous Material for the Activation and Utilization of CO2 in Insertion Reactions

The conversion of CO₂ to useful chemicals, especially to atom economical products, is the best approach to utilize an excess of CO₂ present in the atmosphere. In this study, a metal‐organic framework (ZIF‐8) is integrated with nanocrystalline zirconosilicate zeolite to develop an integrated porous catalyst for CO₂ insertion reactions. The catalyst exhibits excellent activity for the CO₂ insertion reaction of epoxide to produce cyclic carbonate in neat condition without the addition of any co‐catalyst. The catalyst is stable and recyclable during the cyclic carbonate synthesis. Further, the catalyst also exhibits very good activity in another CO₂ insertion reaction to produce quinazoline‐2,4(1H, 3H)‐dione.     

Trace determination of parabens in cosmetics and personal care products using fabric‐phase sorptive extraction and high‐performance liquid chromatography with UV detection

A simple, fast, and sensitive analytical protocol using fabric‐phase sorptive extraction followed by high performance liquid chromatography with ultraviolet detection has been developed and validated for the extraction of five parabens including methylparaben, ethylparaben, propylparaben, butylparaben, and benzylparaben. In the present work, sol‐gel polyethylene glycol coated fabric‐phase sorptive extraction membrane is used for the preconcentration of parabens (polar) from complex matrices. The use of fabric‐phase sorptive extraction membrane provides a high surface area which offers high sorbent loading, shortened equilibrium time, and overall decrease in the sample preparation time. Various factors affecting the performance of fabric‐phase sorptive extraction, including extraction time, eluting solvent, elution time, and pH of the sample matrix, were optimized. Separation was performed using a mobile phase consisting of water:acetonitrile (63:37; v/v) at an isocratic elution mode at a flow rate of 0.9 mL/min with wavelength at 254 nm. The calibration curves of the target analytes were prepared with good correlation coefficient values (r² > 0.9955). The limit of detection values range from 0.252 to 0.580 ng/mL. Finally, the method was successfully applied to various cosmetics and personal care product samples such as rose water, deodorant, hair serum, and cream with extraction recoveries ranged between 88 and 122% with relative standard deviation <5%.     

Kinetic modeling of liquid-phase esterification of acetic acid with n-butanol using heterogeneous poly(o-methylene p-toluene sulfonic acid) as catalyst

Liquid-phase esterification of acetic acid with n-butanol to n-butyl acetate is studied in the presence of a polymeric catalyst, that is, poly(o-methylene p-toluene sulfonic acid). The performance of the proposed catalyst is compared with the other commercially available homogeneous and heterogeneous catalysts in terms of its activity. Experiments are conducted in an isothermal stirred batch reactor to study the effects of speed of agitation, temperature, and catalyst loading on the rate of reaction. A concentration-based pseudo-homogeneous (PH) kinetic model and activity-based kinetic models such as PH, Eley-Rideal (ER), and Langmuir-Hinselwood-Hougen-Watson (LHHW) models are developed. All the models considered in this study resulted in similar percentage deviation close to 4%. Further, kinetic models are validated through additional experiments, and it is observed that the simple concentration-based PH model is able to predict experimental data with least deviation compared to activity-based PH, ER, and LHHW models. The developed kinetic models are also tested using the Fisher-Snedecor test (F-test) and are found to be acceptable. By incorporating both modeling data and validation data, the overall absolute average deviations of different models are found to be concentration-based PH model 4.354%, activity-based PH model 5.006%, ER I model 5.189%, ER II model 5.403%, ER III model 5.437%, and LHHW model 6.104%, illustrating the superiority of the simple concentration-based PH model.     

DFT and ab initio quantum chemical studies on p-cyanobenzoic acid

The Fourier transform infrared (FTIR) and FT-Raman spectra of p-cyanobenzoic acid (CBA) have been recorded in the range 4000-400 and 4000-100 cm(-1), respectively. The complete vibrational assignment and analysis of the fundamental modes of the compound were carried out using the observed FTIR and FT-Raman data. The vibrational frequencies determined experimentally were compared with theoretical wavenumbers obtained from ab initio HF and DFT-B3LYP gradient calculations employing 6-31G**, 6-311++G** and cc-pVTZ basis sets for the optimised geometry of the compound. The geometry and normal modes of vibration obtained from the HF and DFT methods are in good agreement with the experimental data. The normal coordinate analysis was also carried out with ab initio force fields utilising Wilson's FG matrix method. The interactions of cyano and carboxylic acid groups with the skeletal vibrational modes were investigated.     

Kinetics of proton transfer between metasubstituted benzoic acids and the carbinol base of crystal violet in toluene: Specific solvent effect–free metasubstituent effect on the reactivity of benzoic acids

Apolar aprotic solvents are particularly advantageous for investigating the intrinsic metasubstituent effect free from complications of specific solvent effects. A kinetic study for toluene‐phase proton transfers between meta‐Me, F, Cl, Br, I, OMe, OPh, COPh, CF₃, CN, NO₂, H benzoic acids and Crystal Violet carbinol base has shown the forward rate constant (log k₁) the most appropriate reactivity parameter in toluene. log k₁ (toluene) as compared to other reported reactivity parameters in benzene or toluene have been found more sensitive to the metasubstituent effect. The regression results of the correlation of log k₁ (toluene) of the acids according to the four dual substituent parameter models are statistically significant, and the best result has been obtained using Taft's model. The overall analysis reveals that metasubstituent's effect is exerted by a 65:35 pattern of its field and second‐order resonance effects. The results further demonstrate that a metasubstituent's resonance effect is virtually a relayed universal field/inductive effect. © 2011 Wiley Peiodicals, Inc. Int J Chem Kinet 43: 303–311, 2011