Energy transfer in hybrids based on a thiophene-substituted ethynylbipyridine dimer decorated with Re(I), Ru(II), and Os(II) units

The preparation, structural features, electrochemical behavior, and optical properties (at room temperature and at 77 K) are reported for a series of thiophene-containing hybrids based on the bent conjugated backbone of a rigid ditopic ligand, the dimeric moiety 3,4-dibutyl-2,5-bis{5'-[(3,4-dibutylthien-2-ylethynyl)-2,2'-bipyridin-5-yl]ethynyl}thiophene (TBTBT). Within the dimer, the diethynyl-2,2'-bipyridine units (bpy, the coordination sites) alternate with three 3,4-dibuthylthiophene units and coordination of the [Re(CO)3Cl], [Ru(bpy)2]2+, and [Os(bpy)2]2+ centers results in the mononuclear species RuTBTBT and OsTBTBT and the binuclear species RuTBTBTRu, OsTBTBTOs, RuTBTBTOs, and ReTBTBTOs. At room temperature, the emitting states obtained by photoexcitation are of 3MLCT nature, and vibronic analysis of the emission spectra indicates that they are largely delocalized over the TBTBT ligand. In the binuclear species, the intermetal separation is ca. 17 A, and for RuTBTBTOs, an efficient Ru --> Os excitation transfer takes place, resulting solely in an Os-based emission. The process is ascribed to double-electron transfer (Dexter), as mediated by the TBTBT ligand; a similar conclusion holds for the case of ReTBTBTOs. For RuTBTBTOs, the process is discussed in some detail also with regard to the possibility of disentangling the constituent hole and electron-transfer events.     

EPR study on ligand-exchange reaction between bis(diethyldiselenocarbamato)copper(II) and some bis(acetylacetonato)copper(II) complexes

The paper is a study on the formation and properties of mixed-chelate copper(II) complexes, in which one ligand is strongly covalently bound diselenocarbamate (dsc), and the other belongs to a series of differently substituted acetylacetonates (acac), all forming weak covalent bonds. Thenoyltrifluoro- and trifluoro- substituted acetylacetonates only partly form mixed-chelate complexes, stable in toluene, benzene or dichloromethane, but gradually decomposing in chloroform or carbontetrachloride by analogy with Cu(Et(2)dsc)(2) behavior in these solvents. Hexafluoro-acetylacetonato copper(II) completely turns into a mixed-chelate Cu(dsc)(hfacac), which remains unchanged for more than 8 months of monitoring in all solvents used. The stability of Cu(dsc)(hfacac) is attributed to the reduced remaining negative charge on selenium atom embarrassing the formation of weak D-A complex with haloalkanes. The obtained EPR parameters suggest significant lowering of the contribution of the 4s AO of copper(II) in the mixed-chelate complexes. It is shown that Cu(acac)(2) does not react with Cu(Et(2)dsc)(2).     

Hydrogen-bonded networks in ethanol proton wires: IR spectra of (EtOH)qH+-Ln clusters (L = Ar/N2, q < or = 4, n < or = 5)

Isolated and microsolvated protonated ethanol clusters, (EtOH)qH+-Ln with L = Ar and N2, are characterized by infrared photodissociation (IRPD) spectroscopy in the 3 microm range and quantum chemical calculations. For comparison, also the spectrum of the protonated methanol dimer, (MeOH)2H+, is presented. The IRPD spectra carry the signature of H-bonded (EtOH)qH+ chain structures, in which the excess proton is either strongly localized on one or (nearly) equally shared between two EtOH molecules, corresponding to Eigen-type ion cores (EtOH2+ for q = 1, 3) or Zundel-type ion cores (EtOH-H+-HOEt for q = 2, 4), respectively. In contrast to neutral (EtOH)q clusters, no cyclic (EtOH)qH+ isomers are detected in the size range investigated (q < or = 4), indicative of the substantial impact of the excess proton on the properties of the H-bonded ethanol network. The acidity of the two terminal OH groups in the (EtOH)qH+ chains decreases with the length of the chain (q). Comparison between (ROH)qH+ with R = CH3 and C2H5 shows that the acidity of the terminal O-H groups increases with the length of the aliphatic rest (R). The most stable (EtOH)qH+-Ln clusters with n < or = 2 feature intermolecular H-bonds between the inert ligands and the two available terminal OH groups of the (EtOH)qH+ chain. Asymmetric microsolvation of (EtOH)qH+ with q = 2 and 4 promotes a switch from Zundel-type to Eigen-type cores, demonstrating that the fundamental structural motif of the (EtOH)qH+ proton wire sensitively depends on the environment. The strength of the H-bonds between L and (EtOH)qH+ is shown to provide a rather sensitive probe of the acidity of the terminal OH groups.     

Novel binding material for supercapacitor electrodes

Environmentally friendly water-based composite material has been investigated as a novel binder for manufacturing supercapacitor electrodes. The performance of these electrodes and those with the conventional polyvinylidene fluoride (PVDF) binder were studied. Results obtained from cyclic voltammetry, electrochemical impedance spectrometry, and charge/discharge measurements showed that the electrodes with the new binder performed significantly better than the electrodes with the conventional PVDF binder; the specific capacitance increased by 51 % in an aqueous electrolyte while in an organic electrolyte, it increased by 15 %. This increase in capacitance was attributed to the electrophilic and hydrophilic nature of the new binding composite. The main reason for the improvement in capacitance was ascribed to reduction of equivalent series resistance (ESR). The presence of highly amorphous polyvinylpyrrolidone (PVP), a polymeric component of the new composite binder, was responsible for the reduction in ESR.     

An Autonomous Chemical Robot Discovers the Rules of Inorganic Coordination Chemistry without Prior Knowledge

We present a chemical discovery robot for the efficient and reliable discovery of supramolecular architectures through the exploration of a huge reaction space exceeding ten billion combinations. The system was designed to search for areas of reactivity found through autonomous selection of the reagent types, amounts, and reaction conditions aiming for combinations that are reactive. The process consists of two parts where reagents are mixed together, choosing from one type of aldehyde, one amine and one azide (from a possible family of two amines, two aldehydes and four azides) with different volumes, ratios, reaction times, and temperatures, whereby the reagents are passed through a copper coil reactor. Next, either cobalt or iron is added, again from a large number of possible quantities. The reactivity was determined by evaluating differences in pH, UV‐Vis, and mass spectra before and after the search was started. The algorithm was focused on the exploration of interesting regions, as defined by the outputs from the sensors, and this led to the discovery of a range of 1‐benzyl‐(1,2,3‐triazol‐4‐yl)‐N‐alkyl‐(2‐pyridinemethanimine) ligands and new complexes: [Fe(L¹)₂](ClO₄)₂ ( 1 ); [Fe(L²)₂](ClO₄)₂ ( 2 ); [Co₂(L³)₂](ClO₄)₄ ( 3 ); [Fe₂(L³)₂](ClO₄)₄ ( 4 ), which were crystallised and their structure confirmed by single‐crystal X‐ray diffraction determination, as well as a range of new supramolecular clusters discovered in solution using high‐resolution mass spectrometry.     

Phenyliodine(III) bis(trifluoroacetate) (PIFA)-promoted synthesis of Bodipy dimers displaying unusual redox properties

Phenyliodine(III) bis(trifluoroacetate) (PIFA) in conjunction with a Lewis acid promotes C-C coupling of Bodipy monomers leading to mixtures of various oligomers. When a single position is blocked with an iodo or phenyl group, formation of the dimer is favored. These dimers display two successive oxidation and two reduction waves separated on average by 260 and 130 mV, respectively, corresponding to each Bodipy subunit.     

A general NMR method for rapid, efficient, and reliable biochemical screening

High-throughput screening is usually the method of drug-lead discovery. It is now well accepted that, for a functional assay, quality is more important than quantity. The ligand-based or protein-based NMR screening methodologies for detecting compounds binding to the macromolecular target of interest are now well established. A novel and sensitive NMR method for rapid, efficient, and reliable biochemical screening is presented. The method named 3-FABS (three fluorine atoms for biochemical screening) requires the labeling of the substrate with a CF(3) moiety and utilizes (19)F NMR spectroscopy for the detection of the starting and enzymatically modified substrates. The method allows for high-quality screening of large compound or natural product extract collections and for measuring their IC(50) values. Applications of this technique to the screening of inhibitors of the Ser/Thr kinase AKT1 and the protease trypsin are presented. In addition, an interesting application of 3-FABS to functional genomics is also presented.     

Redox processes of ruthenium (II) polypyridine complexes induced by fast-atom bombardment mass spectrometry

Fast-atom bombardment (FAB) mass spectrometry in the negative ionization mode enables the sputtering into the gas phase of the ruthenium complexes [Ru(2,2′-bipyridine[bpy])₂(2,5-bis) (pyrydil)pyrazine[dpp])](PF₆)₂; [Ru(bpy)₂,(2,3dpp)](PF₆)₂;[Ru(bpy)₂,(2,3-dpp-Me)]( PF₆)₃; and [Ru(bpy)₂(?-2,3-dpp)]₂ RuCl₂(PF₆)₄ as intact radical anions. These data, combined with those avaiiable from the positive FAB spectra allow a full characterization of the analytes.