Viscoelastic characterization of selected foods over an extended frequency range

Three disparate food systems (gummy candy, Mozzarella cheese, and cooked ham) were characterized for their viscoelastic behavior under isothermal conditions over an extended frequency range of 10⁻³ to 10⁴ Hz using broadband viscoelastic spectroscopy (BVS). The materials were tested for any stress-induced fluid flow. However, no evidence of fluid flow was found under the tested frequency range. Validity of time–temperature superposition for the selected materials was also tested and compared with data from BVS.     

Boundary conditions for stokes flows near a porous membrane

A theoretical development is carried out to model the boundary conditions for Stokes flows near a porous membrane, which, in general, allows non-zero slip as well as normal flow at the surface. Two types of models are treated: an infinitesimally thin plate with a periodic array of circular apertures and a series of parallel slits. For Stokes flows, the mean normal flux and slip velocity are proportional to the pressure difference across the membrane and the average shear stress at the membrane, respectively. The appropriate proportionality constants which depend on the membrane geometry are calculated as functions of the porosity. An interesting feature of the results is that the slip at the membrane has, in general, a direction different from that of the applied shear for these models.     

Micromotor‐Based Energy Generation

A micromotor‐based strategy for energy generation, utilizing the conversion of liquid‐phase hydrogen to usable hydrogen gas (H₂), is described. The new motion‐based H₂‐generation concept relies on the movement of Pt‐black/Ti Janus microparticle motors in a solution of sodium borohydride (NaBH₄) fuel. This is the first report of using NaBH₄ for powering micromotors. The autonomous motion of these catalytic micromotors, as well as their bubble generation, leads to enhanced mixing and transport of NaBH₄ towards the Pt‐black catalytic surface (compared to static microparticles or films), and hence to a substantially faster rate of H₂ production. The practical utility of these micromotors is illustrated by powering a hydrogen–oxygen fuel cell car by an on‐board motion‐based hydrogen and oxygen generation. The new micromotor approach paves the way for the development of efficient on‐site energy generation for powering external devices or meeting growing demands on the energy grid.     

Printable Bioelectronics To Investigate Functional Biological Interfaces

Thin‐film transistors can be used as high‐performance bioelectronic devices to accomplish tasks such as sensing or controlling the release of biological species as well as transducing the electrical activity of cells or even organs, such as the brain. Organic, graphene, or zinc oxide are used as convenient printable semiconducting layers and can lead to high‐performance low‐cost bioelectronic sensing devices that are potentially very useful for point‐of‐care applications. Among others, electrolyte‐gated transistors are of interest as they can be operated as capacitance‐modulated devices, because of the high capacitance of their charge double layers. Specifically, it is the capacitance of the biolayer, being lowest in a series of capacitors, which controls the output current of the device. Such an occurrence allows for extremely high sensitivity towards very weak interactions. All the aspects governing these processes are reviewed here.     

The Contrasting Recognition Behavior of β‐Cyclodextrin and Its Sulfobutylether Derivative towards 4′,6‐Diamidino‐2‐phenylindole

The noncovalent interactions between 4′, 6‐diamidino‐2‐phenylindole (DAPI) and sulfobutylether β‐cyclodextrin (SBE₇β‐CD) are evaluated by using photochemical measurements and compared with that of native β‐CD. Contrasting recognition behavior and intriguing modulations in the photochemical behavior of DAPI were observed. In particular, a large enhancement in the fluorescence emission and excited‐state lifetime were seen upon binding to SBE₇β‐CD, with the SBE₇β‐CD inclusion complex being approximately 1000 times stronger than that of β‐CD. The ensuing fluorescence “turn on” was demonstrated to be responsive to chemical stimuli, such as metal ions and adamantylanmine (AD). Upon addition of Ca²⁺/AD, nearly quantitative dissociation of the complex was established to regenerate the free dye and result in fluorescence “turn off”. The SO₃^? groups are believed to be critical for the strong and selective binding of the chromophore and the stimuli‐responsive tuning. This is as an important design criterion for the optimization of host–guest properties through supramolecular association, which is relevant for drug‐delivery applications.     

Electroanalytical Studies of Chromone Based Ionophores for the Selective Determination of Arsenite Ion

Two chemosensors 4H‐1‐benzopyran‐3‐carboxaldehyde, 4‐oxo‐, 3‐(2‐phenylhydrazone), [I₁] and 4H‐1‐benzopyran‐3‐carboxaldehyde, 4‐oxo‐, 3‐[2‐(2,4‐dinitrophenyl)hydrazone], [I₂] with hydrazone‐NH group as binding site have been shown excellent selectivity for arsenite ion. It is confirmed by the UV‐vis titration that I₂ is more selective than I₁. The performance of the coated graphite electrode (CGE) was found to be better than polymeric membrane electrode (PME) in terms of linear range of 4.89×10^?7–1.0×10^?1 mol L^?1, low detection limit of 8.31×10^?8 mol L^?1 and short response time. The proposed sensors were also used to determine the arsenite ion in different water samples.     

Insights into the Catalytic Activity of Nitridated Fibrous Silica (KCC‐1) Nanocatalysts from 15N and 29Si NMR Spectroscopy Enhanced by Dynamic Nuclear Polarization

Fibrous nanosilica (KCC‐1) oxynitrides are promising solid‐base catalysts. Paradoxically, when their nitrogen content increases, their catalytic activity decreases. This counterintuitive observation is explained here for the first time using ¹⁵N‐solid‐state NMR spectroscopy enhanced by dynamic nuclear polarization.     

Carbon Dots: The Newest Member of the Carbon Nanomaterials Family

Carbon nanomaterials have been extensively researched in the past few years owing to their interesting properties. The massive research efforts resulted in the emergence of carbon dots, which belong to the carbon nanomaterials family. Carbon dots (C‐dots) have garnered the attention of researchers mainly due to their convenient availability from organic as well as inorganic materials and also due to the novel properties they exhibit. C‐Dots have been said to overcome the era of quantum dots, referring to their levels of toxicity and biocompatibility. In this review, we focus on the discovery of C‐dots, their structure and composition, surface passivation to enhance their optical properties, the various synthetic methods used, their applications in different areas, and future perspectives. Emphasis has been given to greener approaches for the synthesis of C‐dots in order to make them cost effective as well as to improve their biocompatibility.     

Quantitative determination of isoquinoline alkaloids and chlorogenic acid in Berberis species using ultra high performance liquid chromatography with hybrid triple quadrupole linear ion trap mass spectrometry

Berberis species are well known and used extensively as medicinal plants in traditional medicine. They have many medicinal values attributable to the presence of alkaloids having different pharmacological activities. In this study, a method was developed and validated as per international conference on harmonization guidelines using ultra high performance liquid chromatography with hybrid triple quadrupole‐linear ion trap mass spectrometry operated in the multiple reaction monitoring mode for nine bioactive compounds, including protoberberine alkaloids, aporphine alkaloids and chlorogenic acid. This method was applied in different plant parts of eight Berberis species to determine variations in content of nine bioactive compounds. The separation was achieved on an ACQUITY UPLC CSH? C₁₈ column using a gradient mobile phase at flow rate 0.3 mL/min. Calibration curves for all the nine analytes provided optimum linear detector response (with R² ≥0.9989) over the concentration range of 0.5–1000 ng/mL. The precision and accuracy were within RSDs ≤2.4 and ≤2.3%, respectively. The results indicated significant variation in the total contents of the nine compounds in Berberis species.