Antisymmetric exchange interaction,magnetoelectric and magnetodielectric response in structurally distorted G-type antiferromagnetic perovskite: La0.9Gd0.1FeO3

Detailed structural analysis of the X-Ray diffraction pattern of La_0.9Gd_0.1FeO₃ (LGFO) synthesized via the solid state reaction reveals distorted perovskite structure. Magnetization studies show a characteristic of weak ferromagnetism which is believed to be induced by canted anti-ferromagnetically coupled spins. When explored in a wide temperature and frequency range, AC electrical properties reveal interesting relaxation mechanisms. LGFO exhibits relatively high dielectric permittivity (ε′~4×10³) close to room temperature. Temperature dependent magneto-dielectric response appears (magnetodielectric ~−5.5%) even at low magnetic field ~5 kOe. Attractive electrical, magnetic and magnetoelectric properties of the present LGFO at relatively higher temperature makes it a very promising material for application in devices.     

Laser Light and X-Ray Diffraction Studies of Oriented Isotactic Polypropylene (iPP) Prepared by Temperature Slope Crystallization

Isotactic polypropylene (iPP) film was melt-crystallized in a temperature gradient. The iPP film showed well oriented α- and β-crystalline textures along the gradient. The crystalline structure, phase transition boundary and lamellar twisting were examined by X-ray diffraction and laser light diffraction (LLD). On the α-β boundary, LLD shows a sharp streak perpendicular to the boundary, where the a-axis of the β-crystal is oriented perpendicular to the temperature gradient. Apart from the boundary, the a-axis of the β-crystal becomes parallel to the gradient. The β-crystal shows lamellar twisting with a pitch of 200 μm at room temperature. When heated the β-crystal, the lamellar distance of 295Å at room temperature decreases to 285Å at 80–100°C and then increases to more than 300Å above 120°C. During the heating, the value of the twist period increases from 200 to 210 μm at 90–100°C, and then to above 224 μm at 140°C. The increase of the twist period is related to the increasing crystalline thickness of the β-lamellae.     

Potential formation and high density plasma production on the tandem mirror GAMMA 10

GAMMA 10 experiments have advanced in high density experiments after the last EPS Workshop where we reported high density plasma production by using an ion cyclotron range of frequency heating at a high harmonic frequency and neutral beam injection in the central cell. Recently a high density plasma was obtained with much improved reproducibility than before and without degradation of diamagnetic signal. The high density plasma was attained by adjusting the spacing of the conducting plates installed in the anchor transition regions. Dependencies of particle confinement time, ion energy confinement time and plasma confining potential on plasma density were obtained for the first time in the high density region. Presented at 5th Workshop “Role of Electric Fields in Plasma Confinement and Exhaust”, Montreus, Switzerland, June 23–24, 2002.     

Infrared Spectroscopic Analysis of Chrysene and 1.2-Benzanthracence in Wax films

Chrysene and 1.2-benzanthracene are successfully doped in a solid wax film and their vibrational spectra in gooo--400cm^-1 are discussed. The harmonic frequencies and relative intensities of both the molecules observed in the film are compared with theoretical values calculated by the density functional theory （DFT） model as well as with the previous experimental data. The effects on spectra due to change of matrix and some additional bands observed in the wax film are also reported. Excellent agreement in the spectral positions and strengths between the experiments and DFT values are found.     

Polarization-insensitive nonlinear optical loop mirror demultiplexer with twisted fiber

We experimentally demonstrate reduction of the polarization sensitivity of a nonlinear optical loop mirror (NOLM) from 5 to 0.5 dB by use of 550 m of twisted dispersion-shifted fiber with a twist rate of 8 turns/m (24 turns/beat length). The twisting of the fiber induces circular birefringence and equates the parallel-and the orthogonal-polarization nonlinear phase-shift terms. Experimental results show that the polarization sensitivity monotonically decreases from 5 dB for nontwisted fiber to 0.5 dB for fiber that is twisted at a rate of 8 turns/m, and the twist rate should be more than 4 turns/m (>10 turns/beat length) for emulation of circularly polarized fiber. The minimum polarization sensitivity occurs when the control-pulse polarization is aligned with one of the eigenmodes of the twisted fiber. With the fiber twisted at a rate of 8 turns/m in the NOLM, the nonlinear transmission is 23% at a switching energy of 4 pJ/pulse. Simulations confirm the observed behavior and show that the remaining polarization sensitivity results from energy transfer between orthogonal modes of the signal pulse.     

Colorizing mechanism of brass surface by femtosecond laser induced microstructures

In this paper, we exhibit the colorizing of brass surfaces by forming femtosecond laser induced microstructures on the sample surfaces. A variety of single colors such as brown, yellow, green, and black are introduced on brass surfaces by engineering periodic microgratings, microholes, and ring-shaped micro-patterns using Single Beam Direct Laser Writing (SBDLW) technique. The color of the micro-structured brass surfaces is certainly dependent on the width, depth, and period of the microstructures. Finally, we explain, in brief, the colorizing mechanism of metals by femtosecond laser induced microstructures.     

Effect of transmission fiber and amplifier noise on optical chaos synchronization

Optical chaos propagation has few constraints peculiar to itself which do not become as significant in conventional nonchaotic optical communication. We have investigated the effects of transmission fiber nonlinearities, dispersion and noise of erbium doped fiber amplifier (EDFA) on chaotic signal synchronization in lumped and distributed configuration. It is found that the effects of fiber dispersion can be easily compensated; however, the effects of fiber nonlinearity on chaos cannot be overdone and must be avoided. Three distinct configurations with different combinations of standard telecommunication fiber, dispersion compensation fiber and lumped and distributed EDF for amplification are analysed. The results are compared in terms of sync diagrams and noise figure. The chaos after propagation through distributed amplification performs better as compared to lumped amplification. Also, a new quantitative measure for the calculation of deviation in sync diagram of chaos is introduced.     

Design of highly nonlinear dispersion flattened hexagonal photonic crystal fibers for dental optical coherence tomography applications

In this paper, we propose a highly nonlinear dispersion flattened hexagonal photonic crystal fiber (HNDF-HPCF) with nonlinear coefficients as large as 57.5W⁻¹ km⁻¹ at 1.31 μm wavelength for dental optical coherence tomography (OCT) applications. This HNDF-HPCF offers not only large nonlinear coefficient but also very flat dispersion slope and very low confinement losses. Using these characteristics of our proposed PCF, it is shown through simulations by using finite difference method with an anisotropic perfectly matched boundary layer that this PCF offers the efficient supercontinuum (SC) generation for dental OCT applications at 1.31 μm wavelength using a picosecond pulse easily produced by commercially available less expensive laser sources. Coherent length of light source using SC is found 10 μm and the spatial resolutions in the depth direction for dental applications of OCT are found about 6.1 μm for enamel and 6.5 μm for dentin.     

Designing an all epitaxial 1,550 nm intra-cavity VCSEL using GaInAsN/AlGaInAs in the active region and AlGaAsSb/AlAsSb in top and bottom DBRs

In this paper, a 1,550 nm Intracavity structure vertical cavity surface emitting laser (VCSEL) has been designed using quaternary compound QW/barrier materials of GaInAsN/AlGaInAs matched with InP substrate. This choice has been made instead of choosing widely used GaInAsP/InP and AlGaInAs/InP to gain some advantages. In addition to the introduction of new combination in the active region, a different compound semiconductor combination AlGaAsSb/AlAsSb has been used as the DBR material for achieving lattice matching and also for achieving higher refractive index contrast. Compared to widely used GaAs/AlGaAs DBR mirror system, which needed wafer fusion with the top and bottom sides of the active region at 1,550 nm, the chosen DBR of this design is advantageous. The active material compositions have been chosen to obtain a peak gain at 1,550 nm and all other compositions have been chosen to obtain close lattice match at the same time to obtain the desired bandgap at the desired layers. The end result of this design is a VCSEL based on InP substrate which is capable of producing 1,550 nm light output and which can be constructed using widely used epitaxial techniques because all of the layers are lattice matched.