Redox-active ionic-liquid-assisted one-step general method for preparing gold nanoparticle thin films: applications in refractive index sensing and catalysis

We describe a general one-step facile method for depositing gold nanoparticle (GNP) thin films onto any type of substrates by the in situ reduction of AuCl(3) using a newly designed redox-active ionic liquid (IL), tetrabutylphosphonium citrate ([TBP][Ci]). Various substrates such as positively charged glass, negatively charged glass/quartz, neutral hydrophobic glass, polypropylene, polystyrene, plain paper, and cellophane paper are successfully coated with a thin film of GNPs. This IL ([TBP][Ci]) is prepared by the simple neutralization of tetrabutylphosphonium hydroxide with citric acid. We also demonstrate that the [TBP][Ci] ionic liquid can be successfully used to generate GNPs in an aqueous colloidal suspension in situ. The deposited GNP thin films on various surfaces are made up of mostly discrete spherical GNPs that are well distributed throughout the film, as confirmed by field-emission scanning electron microscopy. However, it seems that some GNPs are arranged to form arrays depending on the nature of surface. We also characterize these GNP thin films via UV-vis spectroscopy and X-ray diffractometry. The as-formed GNP thin films show excellent stability toward solvent washing. We demonstrate that the thin film of GNPs on a glass/quartz surface can be successfully used as a refractive index (RI) sensor for different polar and nonpolar organic solvents. The as-formed GNP thin films on different surfaces show excellent catalytic activity in the borohydride reduction of p-nitrophenol.     

Determination of PuO2% in power reactor mixed oxide fuel blends (0.4–44% PuO2) by neutron well co-incidence counting technique

Neutron Well Coincidence Counting has been explored as a non destructive assay technique for determining the percentage of PuO₂ in blended mixture of UO₂ and PuO₂ powders. The method has been applied to MOX blends having PuO₂ content varying from 0.4 to 44% for both thermal and fast reactors. The use of Neutron Well Coincidence Counting technique is validated as a process control step for determining PuO₂ content in the fabrication of MOX fuel by comparing it with chemical analysis of sintered pellets. It has been used at Advanced Fuel fabrication Facility, Bhabha Atomic Research Centre, Tarapur during the manufacture of MOX fuel of various types for thermal and fast reactors.     

Experimental design optimization of the capillary electrophoresis separation of leucine enkephalin and its immune complex

To optimize the capillary electrophoretic separation conditions for leucine enkephalin (LE) and the immune complex of the LE and anti-LE reaction, an analysis using a three-level, three-factorial Box-Behnken design was performed. Three separation parameters, buffer pH (X(1)), buffer concentration (X(2)), and applied voltage (X(3)), were chosen to observe the effect on separation responses. The responses were theoretical plate number, migration time of the LE peak, and resolution between the peaks. The optimum conditions and process validation were determined using statistical regression analysis and surface plot diagrams. The capillary electrophoresis optimum separation conditions were established to be 75 mM phosphate buffer at pH 7.00 with an applied separation voltage of 15 kV. By using the analysis technique, the prediction of responses was satisfactory and process verification yielded values within the +/-5% range of the predicted efficiency.     

Manifestation of diamagnetic chemical shifts of proton NMR signals by an anisotropic shielding effect of nitrate anions

A remarkable upfield shift of the py_α protons of complexed 2,2′-bipyridine in [cis-Pd(bpy)(NO₃)₂] is observed which is considered to originate from the anisotropic influence of suitably positioned coordinated nitrate anions around the Pd(II) centre of the molecule. A typical complexation-induced downfield shift is observed for the NH₂ protons in [cis-Pd(en)(NO₃)₂] where ‘en’ stands for ethylenediamine.     

Residual determination and risk assessment of buprofezin in plum (Prunus domestica) grown in open‐field conditions following the application of three different formulations

This study was conducted to characterize the residual level and perform a risk assessment on buprofezin formulated as an emulsifiable concentrate, wettable powder, and suspension concentrate over various treatment schedules in plum (Prunus domestica). The samples were extracted with an AOAC quick, easy, cheap, effective, rugged, and safe, ‘QuEChERS’, method after major modifications. As intrinsic interferences were observed in blank plum samples following dispersive‐solid phase extraction (consisting of primary secondary amine and C₁₈ sorbents), amino cartridges were used for solid‐phase extraction. Analysis was carried out using liquid chromatography with diode array detection and confirmed by liquid chromatography–tandem mass spectrometry. The method showed excellent linearity with determination coefficient (R² = 1) and satisfactory recoveries (at two spiking levels, 0.5 and 2.5 mg/kg) between 90.98 and 94.74% with relative standard deviation (RSD) ≤8%. The limit of quantification (0.05 mg/kg) was considerably lower than the maximum residue limit (2 mg/kg) set by the Codex Alimentarius. Absolute residue levels for emulsifiable concentrates were highest, perhaps owing to the dilution rate and adjuvant. Notably, all formulation residues were lower than the maximum residue limit, and safety data proved that the fruits are safe for consumers. Copyright © 2016 John Wiley & Sons, Ltd.     

First Synthesis of Continuous Mesoporous Copper Films with Uniformly Sized Pores by Electrochemical Soft Templating

Although mesoporous metals have been synthesized by electrochemical methods, the possible compositions have been limited to noble metals (e.g., palladium, platinum, gold) and their alloys. Herein we describe the first fabrication of continuously mesoporous Cu films using polymeric micelles as soft templates to control the growth of Cu under sophisticated electrochemical conditions. Uniformly sized mesopores are evenly distributed over the entire film, and the pore walls are composed of highly crystalized Cu.     

Competing forward and reversed chain reactions in one-dimensional molecular line growth on the Si(100)-(2 x 1)-H surface

To explore the role of competing forward and reversed chain reactions in the growth of a one-dimensional (1D) molecular line on the Si(100)-(2 x 1)-H surface, controlled experiments were performed with various alkene molecules by scanning tunneling microscopy (STM) at various temperatures. It was observed that the end dangling bond (DB) of a styrene line, fabricated by a chain reaction on the Si(100)-(2 x 1)-H surface at 300 K, initiated a reverse chain reaction at 400 K, leading to the complete disappearance of the styrene line with zero-order desorption kinetics (rate constant k = 1.17 x 10-2 s-1 at 400 K). In the case of 2,4-dimethylstyrene, the reversed chain reaction was observed even at 300 K. These results suggest that the appearance of a molecular line in an STM image is determined by the rates of competing forward and reversed chain reactions at a given temperature. As predicted, 1D lines formed by the DB-initiated chain reaction of 1-hexene and 1-heptene on Si(100)-(2 x 1)-H were observed at 180 K because of the reduced desorption rate, despite the fact that those molecules showed no line growth at 300 K. These results indicate that the scope of forming 1D molecular lines on the Si(100)-(2 x 1)-H surface with various alkenes is much wider than anticipated in previous studies.     

Influence of electrolytes/non-electrolytes on the cloud point phenomenon of the aqueous promethazine hydrochloride drug solution

We have studied the clouding phenomena in promethazine hydrochloride (PMT) aqueous solutions in presence of electrolytes and non-electrolytes. PMT, a tranquillizer, shows phase separation. The cloud point (CP) decreases with increase in pH due to deprotonation of drug molecules. At constant pH, increasing salt addition causes an increase in CP, which is explained on the basis of their position in Hofmeister series and their hydrated radii. With quaternary salts CP increases due to adsorption/mixed micelle formation. Ureas decrease the CP and the behavior is explained on the basis of removal of water from the headgroup region.