Zn-doping effect on the energy barrier to magnetization reversal in superparamagnetic nickel ferrite nanoparticles

Measurements of ac-susceptibility and dc-magnetization were carried out on samples of Ni_1-xZn_xFe₂O₄ nanoparticles (x=0, 0.25, 0.5, 0.75) with average diameters 〈D〉≈7 nm. Values of the superparamagnetic blocking temperature T̄_B were obtained from the characteristic temperature behavior of the imaginary susceptibility χ_imag. An Arrhenius-type law, which accurately describes the relationship between the observation time τ_obs and the blocking temperature, was used to determine the effective energy barrier to magnetization reversal U_eff. A Zn-content dependence of the energy barrier is observed, where U_eff changes little for 0≤x≤0.25, it peaks at x=0.5, and decreases back upon further Zn-doping. The large increase of U_eff at x=0.5 is attributed to an enhanced magnetic anisotropy induced by the crossover between two spatial arrangements of spins in the A and B sub-lattices of the ferrimagnetic inverse spinel. PACS 75.50.Bb; 75.50.Gg; 75.30.Et     

Error estimation,adaptivity and data transfer in enriched plasticity continua to analysis of shear band localization

In this paper, an adaptive FE analysis is presented based on error estimation, adaptive mesh refinement and data transfer for enriched plasticity continua in the modelling of strain localization. As the classical continuum models suffer from pathological mesh-dependence in the strain softening models, the governing equations are regularized by adding rotational degrees-of-freedom to the conventional degrees-of-freedom. Adaptive strategy using element elongation is applied to compute the distribution of required element size using the estimated error distribution. Once a new mesh is generated, state variables and history-dependent variables are mapped from the old finite element mesh to the new one. In order to transfer the history-dependent variables from the old to new mesh, the values of internal variables available at Gauss point are first projected at nodes of old mesh, then the values of the old nodes are transferred to the nodes of new mesh and finally, the values at Gauss points of new elements are determined with respect to nodal values of the new mesh. Finally, the efficiency of the proposed model and computational algorithms is demonstrated by several numerical examples.     

The Pontryagin Maximum Principle 50 years later

Proceedings of the Steklov Institute of Mathematics -     

Directed and elliptic flow in 197Au+197Au at intermediate energies

Directed and elliptic flow for the ¹⁹⁷Au+¹⁹⁷Au system at incident energies between 40 and 150 MeV per nucleon has been measured using the INDRA 4π multi-detector. For semi-central collisions, the excitation function of elliptic flow shows a transition from in-plane to out-of-plane emission at around 100 MeV per nucleon. The directed flow changes sign at a bombarding energy between 50 and 60 MeV per nucleon and remains negative at lower energies. Molecular dynamics calculations (CHIMERA) indicate sensitivity of the global squeeze-out transition on the σ _NN and demonstrate the importance of angular momentum conservation in transport codes at low energies.     

Diels-alder reaction of 1-methylcycloprop-2-ene-1-carbonitrile with methyl 2-oxo-2H-pyran-5-carboxylate

The Diels-Alder reaction of 1-methylcycloprop-2-ene-1-carbonitrile and coumalic acid methyl ester (methyl 2-oxo-2H-pyran-5-carboxylate) gave a 2:1 adduct with endo-syn configuration of both cyclopropane fragments, which was established by X-ray analysis. According to the ¹H NMR data, the reaction involves intermediate formation of decarboxylated 1:1 adduct having a cycloheptatriene structure; its isomerization into the corresponding caradiene, followed by addition of the second dienophile molecule, was confirmed by quantum-chemical calculations.     

Superior refractive index tailoring properties in composite ZrO2/SiO2 thin film systems achieved through reactive electron beam codeposition process

Composite optical thin-film materials have received a significant amount of interest in order to relieve the material constraints on refractive indices as well as reducing the number of layers required in optical coating design. Amongst others binary zirconia-silica composite thin films have attracted considerable attentions due to their several favorable opto-mechanical properties. In the present studies such a composite system under certain compositional mixings displayed both refractive index and band gap supremacy over pure zirconia films violating the most popular Moss rule. This unexpected evolution has several practical applications one of which can be directly employed in extending the range of tunability of the refractive index. Besides, the probing of such a novel evolution through the analysis of ellipsometric refractive index modeling and morphological correlation functions has revealed several novel as well as superior microstructural properties in the composite thin film systems. All these characterization and analysis techniques distinctly indicate a strong interrelation between the microstructural ordering and superior optical properties of the present zirconia-silica codeposited composites.     

System dependence of the correlation function of IMFs in Ar + Sn at 35 MeV/u

The inclusive reduced velocity correlation functions of the intermediate mass fragments were measured in the reactions of ³⁶Ar + ^112,124Sn at 35 MeV/u. The anti-correlation is observed to be stronger in ³⁶Ar + ¹²⁴Sn system than that in ³⁶Ar + ¹¹²Sn. The difference of the correlation functions between the two reactions is mainly contributed by the particle pairs with high momenta. A three body Coulomb repulsive trajectory model is employed to calculate the emission time scale of the IMFs for the two systems. The time scale is 150 fm/c in ³⁶Ar + ¹¹²Sn and 120 fm/c in the ³⁶Ar + ¹²⁴Sn, respectively.     

Microwave synthesis of magnetic Fe3O4 nanoparticles used as a precursor of nanocomposites and ferrofluids

Methods to synthesize magnetic Fe₃O₄ nanoparticles and to modify the surface of particles are presented in the present investigation. Fe₃O₄ magnetic nanoparticles were prepared by the co-precipitation of Fe³⁺ and Fe²⁺, NH₃·H₂O was used as the precipitating agent to adjust the pH value, and the aging of Fe₃O₄ magnetic nanoparticles was accelerated by microwave (MW) irradiation. The obtained Fe₃O₄ magnetic nanoparticles were characterized by Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), X-ray powder diffraction (XRD) and vibrating sample magnetometer (VSM). The average size of Fe₃O₄ crystallites was found to be around 8–9 nm. Thereafter, the surface of Fe₃O₄ magnetic nanoparticles was modified by stearic acid. The resultant sample was characterized by FT-IR, scanning electron microscopy (SEM), XRD, lipophilic degree (LD) and sedimentation test. The FT-IR results indicated that a covalent bond was formed by chemical reaction between the hydroxyl groups on the surface of Fe₃O₄ nanoparticles and carboxyl groups of stearic acid, which changed the polarity of Fe₃O₄ nanoparticles. The dispersion of Fe₃O₄ in organic solvent was greatly improved. Effects of reaction time, reaction temperature and concentration of stearic acid on particle surface modification were investigated. In addition, Fe₃O₄/polystyrene (PS) nanocomposite was synthesized by adding surface modified Fe₃O₄ magnetic nanoparticles into styrene monomer, followed by the radical polymerization. The obtained nanocomposite was tested by thermogravimetry (TG), differential scanning calorimetry (DSC) and XRD. Results revealed that the thermal stability of PS was not significantly changed after adding Fe₃O₄ nanoparticles. The Fe₃O₄ magnetic fluid was characterized using UV–vis spectrophotometer, Gouy magnetic balance and laser particle-size analyzer. The testing results showed that the magnetic fluid had excellent stability, and had susceptibility of 4.46×10⁻⁸ and saturated magnetization of 6.56 emu/g. In addition, the mean size d (0.99) of magnetic Fe₃O₄ nanoparticles in the fluid was 36.19 nm.     

Determination of cyclosporin A in the serum of kidney transplant patients by rapid-flow fractionation and normal-phase high-performance liquid chromatography

High-performance liquid chromatography was used to determine cyclosporin A (CsA) concentrations in the serum of kidney transplant patients by rapid-flow fractionation (RFF) followed by silica gel normal-phase high-performance liquid chromatography (HPLC). The extraction of CsA from serum was achieved by RFF using a short diatomaceous earth column eluted with diethyl ether-n-hexane (50:50, v/v). The recovery was more than 80% at concentrations of 50-150 micrograms/l. The concentration of this compound was determined by HPLC using a conventional silica gel column with 3.3 M ammonia solution-ethanol-n-hexane (0.31:10.69:89, v/v) as eluent. Concentration calibration was made on the basis of the peak-height ratio of CsA to CsD as the internal standard. The coefficient of variation of this assay was less than 6.5% and the results were used for the therapeutic drug monitoring of CsA administered to kidney transplant patients. Measurements of the CsA concentrations in 160 serum specimens were also made by conventional radioimmunoassay (RIA) using commercial kits. The data obtained by RIA were on average 2.5 times those obtained by HPLC. Higher values in RIA were observed characteristically with patients with severe disfunction resulting from CsA hepatotoxicity. From the results, it appeared that HPLC rather than RIA provides more precise and reliable values for the concentration of this drug.