联苯聚醚醚酮酮的合成与性能研究

用亲核取代路线合成了含亚联苯结构的新型聚醚醚酮酮（联苯ＰＥＥＫＫ），并对其基本性能进行了测定。结果表明，联苯ＰＥＥＫＫ的Ｔｍ比聚醚醚酮（ＰＥＥＫ）高７７℃，其Ｔｇ比ＰＥＥＫ的高４１℃，且保持了良好的力学性能，本文还对联苯ＰＥＥＫＫ的晶体结构进行了初步探讨。     

水化Na-蒙脱石和Na/Mg-蒙脱石的分子动力学模拟

利用分子动力学方法(MD)研究了Na-蒙脱石和Na/Mg-蒙脱石层间的补偿阳离子和水分子的结构及扩散性质. 模拟结果表明, 在一定水含量范围内Na-蒙脱石和Na/Mg-蒙脱石表现出不同的膨胀形式, 特别是层间水分子数目在48～72之间时, Na/Mg-蒙脱石的层间距比Na-蒙脱石有较为明显的增大. Na/Mg-蒙脱石两层水化物的层间水分子与Mg2+形成了明显的两层水合壳; 而与Na+只形成了一层平面的水合壳. 在Na/Mg-蒙脱石中, Na+和 Mg2+的扩散方式不同, Na+的扩散范围相对更广, 自扩散系数更大. Na/Mg-蒙脱石比相同水含量下的Na-蒙脱石层间水的自扩散系数小. 由于Mg2+和Na+对层间结构的强烈影响, 从而使有少量Mg2+取代Na+的Na/Mg-蒙脱石与Na-蒙脱石表现出不同的膨胀性质和层间物质的扩散性质.     

4,4'-二氨基二苯醚二苯酮固化环氧树脂/粘土纳米复合材料的研究

采用离子交换法, 用十六烷基三甲基溴化铵处理钙基蒙脱土(MMT), 使蒙脱土的层间距由1.49 nm扩大到2.21 nm, 制备了环氧树脂/ BADK/MMT纳米复合材料, 并用XRD等手段研究了有机蒙脱土在环氧树脂中的插层及剥离行为. 研究结果表明, 蒙脱土含量及环氧树脂与有机土的混合温度和时间均对固化后复合材料的剥离产生影响, 只有在特定条件下才能得到剥离型纳米复合材料.     

聚醚醚酮酮等温结晶动力学的研究

聚醚醚酮酮等温结晶动力学的研究陈艳，王军佐，曹俊奎，那辉，吴忠文（吉林大学化学系，长春，１３００２３）关键词聚醚醚酮酮，等温结晶动力学，差示扫描量热法聚醚醚酮酮（ＰＥＥＫＫ）是在聚醚醚酮（ＰＥＥＫ）基础上开发成功的一种耐热高分子材料。它保持了ＰＥＥＫ...     

流动相组成对有机硒手性化合物拆分的影响

 在自制的涂敷型纤维素 三 (3,5 二甲基苯基氨基甲酸酯 ) (CDMPC)手性固定相上拆分了一些结构相似的有机硒手性化合物 ,详细考察了三元流动相对手性拆分的影响 ,并探讨了溶质分子与手性固定相相互作用的模式。实验结果表明 :在二元流动相中加入极少量的质子性改性剂 (醇 )或非质子性改性剂 (乙腈 ) ,可使溶质的保留和手性拆分发生较大的变化。     

Study of the adsorption of cytochrome c on a gold nanoparticle – modified gold electrode by using cyclic voltammetry, electrochemical impedance spectroscopy and chronopotentiometry

Adsorption of cytochrome c (Cyt c) on a gold nanoparticle – modified gold electrode was studied by using cyclic voltammetry, electrochemical impedance spectroscopy and chronopotentiometry in a phosphate buffer solution. It is shown that the charge transfer resistance is directly proportional to the amount of adsorbed Cyt c. The effects of temperature and time on the course of adsorption were also studied. The trends obtained in ΔG_ADS showed that Cyt c was found to have a smaller affinity for the modified electrode as indicated by their smaller negative ΔG_ADS values.     

含联苯结构聚醚醚酮酮共聚物和共混物的制备及性能研究

聚醚醚酮（PEEK）是八十年代初投入市场的全芳香结构热塑性耐高温特种工程塑料，它的7’。一143“C，Tm一334C“‘，最大结晶度为48％，典型制品结晶度为20％～30％［”．PEEK可用通常的设备成型，其制件、纤维、涂料及复合材料在电子电器、机械设备、交通运输、宇航、原子能工程、军事等领域有广泛的用途［’j．聚醚醚酮酮（PEEKK）是继PEEK之后，由德国Hoechst公司开发出来的又一种全芳香结构热塑性耐高温特种工程塑料［‘j．为了研究该类聚合物的结构和性能的关系，我们在实验室中合成了PEEKK和含联苯结构聚醚醚酮酮（PE－＊…     

Open beauty production in high energy π−-tungsten interactions

We present a study of \(B\bar B\) meson pair production inπ ^? interactions at 140, 194 and 286 GeV incident pion energy. At 286 GeV, where we have the best statistics, we find a model-dependent \(B\bar B\) production cross-section \(\sigma _{BB} = 14_{ - 6}^{ + 7} nb/nucleon\) .     

Eu3+、Ga3+共掺杂SiO2基质材料的制备及其发光性质

通过溶胶-凝胶方法制备了稀土离子Eu³⁺和Ga³⁺共掺杂的SiO₂材料;利用IR、XRD等研究了材料的结构,结果表明材料属于非晶态,800 ℃退火后样品的主要结构仍为SiO₂的网状结构。400 ℃退火的样品在393 nm激发下发射光谱显示了Eu³⁺的特征发射光谱,产生3条明显谱带,分别是576 nm(⁵D₀-⁷F     

A new measurement of $J/\psi$ suppression in Pb-Pb collisions at 158 GeV per nucleon

We present a new measurement of production in Pb-Pb collisions at 158 GeV/nucleon, from the data sample collected in year 2000 by the NA50 Collaboration, under improved experimental conditions with respect to previous years. With the target system placed in vacuum, the setup was better adapted to study, in particular, the most peripheral nuclear collisions with unprecedented accuracy. The analysis of this data sample shows that the cross-sections ratio measured in the most peripheral Pb-Pb interactions is in good agreement with the nuclear absorption pattern extrapolated from the studies of proton-nucleus collisions. Furthermore, this new measurement confirms our previous observation that the cross-sections ratio departs from the normal nuclear absorption pattern for semi-central Pb-Pb collisions and that this ratio persistently decreases up to the most central collisions. Received: 25 August 2004, Revised: 15 December 2004, Published online: 21 January 2005