Copper(II) coordination to ligands immobilized on photoluminescent porous silicon

Increased preorganization can be achieved by immobilizing ligands on solid supports. Photoluminescent porous silicon, which can undergo facile hydrosilylation, was used as a support for open chain neutral N- and O-donor ligands. The abilities of these ligands to bind the divalent metal ions Ni(2+), Cu(2+), Zn(2+), and Pb(2+) are examined. Immobilized ligands selectively complexed Cu(II) over the other metal ions studied. Ligands immobilized on photoluminescent porous silicon also removed a significant amount, up to 98%, of Cu(II) from copper(II)-spiked, organic-rich, seawater samples.     

Ion flotation of zinc using ethylhexadecyldimethylammonium bromide

Zinc ions react with the surfactant ethylhexadecyldimethylammonium bromide (EHDABr) to form a surface active sublate which can be removed from aqueous chloride solutions by ion flotation. A typical ion flotation procedure involves passing air through a 235-ml solution containing 5 ppm Zn²⁺, 2.0 M HCl, and 2.5 × 10^?3M EHDABr at a flow rate of 40 ml/min for 150 min. The procedure is simple and rapid. Cadmium, copper, lead, and nickel ions cause reductions of zinc flotation efficiencies of less than 2.5% under the experimental conditions.     

Determination of the distribution of cannabinoids in cannabis resin from the Lebanon using HPLC. Part III

Samples taken from 61 slabs of cannabis resin originating in The Lebanon were examined by high performance liquid chromatography. The slabs were derived from seizures of cannabis resin made over a three-year period. From a study of 14 of these samples, taken from bags which bore a number of identical stamp marks, it was shown that there was a correlation between the cannabinoid distribution and the marks. The remaining 47 samples of cannabis resin, all of which were from bags with different marks, were each found to have a unique cannabinoid distribution. Such an examination can therefore be used to aid investigations where evidence of a common origin is sought.     

Electron-impact ionization of CCl4 and CCl2F2

Absolute partial and total cross sections for electron-impact ionization of CCl4 and CCl2F2 are reported for electron energies from threshold to 1000 eV. The product ions are mass analyzed using a time-of-flight mass spectrometer and detected with a position-sensitive detector whose output demonstrates that all product ion species are collected with equal efficiency irrespective of their initial kinetic energies. Data are presented for production of CCl3(+), CCl2(+), CCl+, C+, Cl2(+), and CCl3(2+) from CCl4; and for production of CCl(2)F+, CClF2(+), CClF(+), (CCl+ + CF2(+)), Cl+, CF+, F+, and C+ from CCl2F2. Data are also reported for formation of (CCl2(+),Cl+) and (CCl+, Cl+) ion pairs from CCl4. The total cross section for each target is obtained as the sum of the partial cross sections. The overall uncertainty in the absolute cross sections for most of the singly charged ions is +/- 5-7 %. The present partial cross sections for lighter fragment ions are found to be considerably greater than had been previously reported but the most recent total cross section measurements agree well with those reported here. Neither the binary-encounter-Bethe theory nor the Deutsch-Mark theory reproduces the experimental cross sections correctly for both targets.     

Capillary gel electrophoresis of single-stranded DNA fragments with UV detection

Capillary gel electrophoresis has proven to be a powerful tool in biomedical research. We report our investigation of some of the critical parameters affecting separations of single-stranded DNA fragments as monitored by ultraviolet (UV) absorbance detection. Although not as sensitive as laser-induced fluorescence (LIF), UV absorbance detection allows one to calculate quite accurately, and inexpensively, the molarity of each separated DNA fragment and, moreover, the signal “fading” effect normally observed with LIF detection can be, in many cases, substituted for fluorescence to detect the many different single-stranded DNAs, as well as for detection of sequencing reactions.     

Use of γ-γ Coincidence Spectrometry in the Geochemical Study of Diamictites from South Africa

We used - coincidence spectrometry to investigate the possible presence of a meteoritical component in 27 samples of South African diamictites. Recently, several studies have suggested that some tillites/diamictites may represent impact breccias, but a petrographical study by our group found no evidence for the presence of impact-characteristic shocked minerals. The siderophile elements, such as Cr, Co, Ni, and, especially, the platinum group elements, have high abundances in meteorites, but low abundances in terrestrial crustal rocks. The Ir content of the diamictites was measured with the new iridium coincidence spectrometer (ICS) at the University of Vienna, with detection limits of around 0.02 ppb. No enrichments in the contents of Ir and other siderophile elements compared to average crustal concentrations were found; thus, no unequivocal evidence for an impact origin of these diamictites of the South African Dwyka Group can be documented.     

Assignment of the mechanism of predissociation of the ClO2 molecule by analysis of single-rotational-level lifetimes

Deconvolutions of measured absorption line profiles in the 1ⁿ₀ (n = 0 to 5) and the 3²₀ bands of the òA₂X?²B₁ electronic transition of ClO₂ reveal subnanosecond lifetimes for all rotational levels of the ²A₂ state. Observed ratios of radiationless rates from spin-doublet components identify direct spin-orbit coupling of the ²A₂ state with ²A₁ and/or ²B₁ vibronic states as a predominant predissociation mechanism. Variations of rates with ν′₁ locate an intersection of a second potential surface with that of the ²A₂ state.     

Solvent extraction of mercury using Alamine 304

Summary A study has been undertaken to develop a solvent extraction system for mercury using Alamine 304 in aqueous chloride medium. The parameters investigated included reagent concentration, acid concentration, pH, aqueous to organic phase ratio, and rate of extraction and stripping. The study shows that mercury can be extracted rapidly and efficiently from aqueous chloride solutions. A number of aqueous stripping reagents removed more than 90% of the mercury from the organic phase with only one equilibrium. These include HNO₃, NaOH and EDTA.

---

Extraktion von Quecksilber mit Alamin 304

Zusammenfassung Die Extraktion von Quecksilber aus der wäßrigen Lösung des Chlorids mit Alamin 304 wurde untersucht. Die Konzentration des Reagens, der Säure, das pH, das Verhältnis der wäßrigen zur organischen Phase sowie das Extraktionsverhältnis wurden geprüft. Die Extraktion verläuft rasch und wirkungsvoll. Eine Reihe wäßriger Reagenzien entzieht mehr als 90% des Quecksilbers aus der organischen Phase. Dazu gehören Salpetersäure, Natronlauge und EDTA.

     

Geometry and force constant determination from correlated wave functions for polyatomic molecules: Ground states of H2O and CH2

Ab initio calculations including electron correlation are reported for the water and methylene molecules as a function of geometry. A large contracted gaussian basis set is used and the multiconfiguration wave functions, optimized by the iterative natural orbital procedure, include 277 and 617 configurations for H₂O and CH₂ respectively. The method of selecting configurations, yielding first-order wave functions, is discussed in some detail. For H₂O, the SCF geometry is r=0,942 Å, =105,8°, the correlated result is r=0,968 Å, =103,2°, and the experimental r=0,957 Å, =104,5°. The water stretching force constants, in millidynes/Å, are 8,72 (SCF), 8,75 (CI), and 8,4 (experiment). Bending force constants are 0,88 (SCF), 0,83 (CI), and 0,76 (experiment). For methylene the SCF geometry is r=1,072 Å, =129,5°, while the result from first-order wave functions is r=1,088 Å, =134°. The predicted CH₂ force constants are 6,16 (SCF) and 6,13 (CI) for stretching and 0,44 (SCF) and 0,33 (CI) for bending.

---

Zusammenfassung Es wird über ab intito-Rechnungen mit Berücksichtigung der Elektronenkorrelation berichtet, die an Wasser- und Methylenmolekülen als Funktion der Geometrie durchgeführt worden sind. Dazu benutzt man einen großen kontrahierten Gauß-Basissatz. Die Multikonfigurationswellenfunktionen, die unter Benutzung von natürlichen Orbitalen nach der iterativen Prozedur optimiert werden, enthalten für H₂O 277 Konfigurationen und für CH₂ 617. Die Auswahlmethode, die zu Wellenfunktionen 1. Ordnung führt, wird diskutiert. Im Falle des Wassers erhält man die SCF-Geometrie zu r=0,942 Å, =105,8°, das korrelierte Resultat ist: r=0,968 Å, =103,2° und das experimentelle r=0,957 Å, =104,5°. Für Wasser ergeben sich die Valenzkraftkonstanten (in Millidyn Å^–1) 8,72 (SCF), 8,75 (CI) und 8,4 (Experiment). Die Deformationskonstanten sind 0,88 (SCF), 0,83 (CI) und 0,76 (Experiment). Im Falle des Methylens ist die SCF-Geometrie r=1,072 Å, =129,5°, während man mit Wellenfunktionen 1. Ordnung r=1,088 Å und =134° erhält. Die CH₂-Kraftkonstanten werden für die Valenzschwingung zu 6,16 (SCF) und 6,13 (CI) bzw. für die Deformationsschwingung zu 0,44 (SCF) und 0,33 (CI) vorausgesagt.

---

---

Work performed under the auspices of the U.S. Atomic Energy Commision.

---

Supported by the grants from the Research Corporation and the University of California Committee on Research.