Pump-probe differencing technique for cavity-enhanced, noise-canceling saturation laser spectroscopy

We present an experimental technique that permits mechanical-noise-free, cavity-enhanced frequency measurements of an atomic transition and its hyperfine structure. We employ the 532-nm frequency-doubled output from a Nd:YAG laser and an iodine vapor cell. The cell is placed in a folded ring cavity (FRC) with counterpropagating pump and probe beams. The FRC is locked with the Pound-Drever-Hall technique. Mechanical noise is rejected by differencing the pump and probe signals. In addition, this differenced error signal provides a sensitive measure of differential nonlinearity within the FRC.     

Laser Stabilisation for the Measurement of Thermal Noise

In order to measure the thermal noise of a mirror suspended in a vacuum it is necessary for the length measurement error due to intensity and frequency noise of the probe laser to be reduced below the thermal noise level. Here we report on an experiment to reduce the frequency and intensity noise of a 40mW Nd:YAG laser for this purpose. The frequency is stabilised using the standard reflection locking technique. To stabilise the laser intensity a technique which uses the properties of an in loop light field has been developed. This technique is capable of suppressing the intensity noise below the shot noise limit without reducing the useful laser power. A servo based on this technique has been designed and tested. The experimental results indicate that the laser noise can be reduced to a level which will allow a displacement sensitivity of 1.5 × 10^-19m/ Hz for the detection of thermal noise in a frequency band of 10 to 500Hz.     

Application of streamwise diffusion to time-dependent free convection of liquid metals

A numerical analysis is given for the application of streamwise diffusion to high-intensity flows with marginal spatial resolution. Terms are added to the momentum equation which are similar to those used in the Petrov-Galerkin, Taylor-Galerkin and balancing tensor diffusivity methods. Values for the streamwise viscosity are obtained from mesh refinement studies. An illustration is given for the time-dependent free convection of a liquid metal in a cavity with differentially heated sided walls. The spatial problem is solved with the Galerkin finite element method and the time integration is performed with the backward Euler method. Solution quality and computation time are compared for results with and without added streamwise diffusion. For the cases presented, streamwise diffusion eliminates spurious oscillations and saves computation time without compromising the solution.     

Injection locked single mode operation of a tea CO2 laser with high energy extraction

Generation of reproducible smooth pulses from longitudinal mode control of a TEA CO₂ laser by signal injection from a cw CO₂ laser is reported and the operating conditions investigated for several new geometries. Applied to unstable resonators, the efficient and spectrally pure, high power output obtains has important application in the area of optical pumping.     

Simulating the Performance of Michelson- and Sagnac-based Laser Interferometric Gravitational Wave Detectors in the Presence of Mirror Tilt and Curvature Errors

We model the behaviour of single-bounce delay-line dual recycled Sagnac-based interferometer and compare its performance with that of single-bounce Michelson-based system. Geometric imperfections such as mirror tilt and curvature mismatch can strongly influence the performance of the Sagnac device due to the inherently smaller free spectral range (FSR) and higher order mode spacing. This leads to a greater number of higher order modes near, or within the signal band in the signal recycling cavity of the instrument. The important consequence of that is, in general, a greater sensitivity of a Sagnac system to nonideal parameters and imperfections of various kind affecting the performance of a real interferometer. A number of optical configurations have also been examined numerically to determine the best possible optical arrangement, in the presence of such geometric imperfections. We show that there is an optimum choice for the nominal radius of curvature of the end mirrors which results from balancing the loss due to mirror tilt against that due to curvature mismatch.     

Spin observables in small-angle elastic → d scattering with an L-type deuteron target at 800 MeV

We have measured spin correlation parameters that describe the elastic scattering of 800 MeV polarized protons from an L-type polarized deuteron target at laboratory angles below 20°. The measured parameters include the correlated analyzing powers A_SL, A_LL and A_NLL and the proton spin-transfer coefficients C_0L,S, C_0L,L, C_SL,N, C_NL,S, C_NL,L and C_LL,N. The results are compared with single-scattering predictions based on different phase-shift solutions for the nucleon-nucleon scattering matrix.     

Investigation of the spectral content of a cw CO laser output using a high-resolution scanning Fabry-Perot interferometer

The use of a scanning Fabry-Perot interferometer of variable length (variable resolution) for investigating the output of a cw CO laser is reported. Under experimental conditions required to achieve maximum power it was found that the laser output consisted of two or more simultaneously occuring transitions due to the overlapping nature of the vibration- rotation bands. The frequency differences between these transitions were measured to an accuracy of 0.01 cm^-1. Operation of the CO laser on a single vibration-rotation transition was obtained by controlling the laser gain with the experimental variables of discharge pressure, gas temperature, and optical alignment. An alternative approach of obtaining monochromatic radiation, by using a Fabry-Perot interferometer as a frequency selective filter external to the CO laser, is reported.     

Noiseless independent signal and power amplification

We present a noiseless optical amplifier comprising a signal-amplifying feed-forward loop and a power-amplifying injection-locked laser. We demonstrate that the signal amplifier can attain a signal-transfer coefficient limited solely by the quantum efficiency of our in-loop photodetector and that we can independently amplify the optical power while leaving the normalized intensity-noise spectral density of the input field unchanged.     

Noise Characterization for Laser Interferometer Gravitational Wave Detectors

This work incorporates a review of the status, in Australia, of data analysis for gravitational wave detection using laser interferometers, within an overview of the present state of such research in the world generally. In this context, data analysis refers not so much to signal simulation as to what might be called the thorough process of noise characterization and the subsequent, quality-controlled signal extraction. To the extent that problems identified here arise for all currently planned instruments, there is necessarily a global component to the discussion presented. In Australia, there are unique circumstances, associated with attempting to carry out work in gravitational wave detection, which demand also a local aspect to the ensuing discussion.     

Investigation of polarisation effects in injection locked lasers

Received: 14 June 1996/Revised version: 6 November 1996