Dynamic surface tensions of Athabasca bitumen vacuum residue including the effect of dissolved air

The pendant drop technique was used to measure the equilibrium and dynamic surface tensions of Athabasca bitumen vacuum residue (500 degrees C+) (AVR) between 150 and 280 degrees C. A significant (16%) slow (over hours) decrease from initial to equilibrium values was found. In addition, the effect of dissolved air on surface tension was studied at 150 degrees C by comparing dynamic surface tensions of air- or nitrogen-saturated AVR in contact with air or nitrogen. It was found that the presence of dissolved air significantly decreases the dynamic change in surface tension (from 16 to 5%). In order to perform the surface tension studies, the density of AVR was required. Archimedes method was used to measure the density of AVR from 98 to 335.8 degrees C.     

The absorption and excitation spectroscopy of matrix-isolated atomic manganese: sites of isolation in the solid rare gases

This study collects information from absorption and luminescence excitation spectra recorded for Mn atoms isolated in the solid rare gases Ar, Kr, and Xe and presents an analysis of the site occupancy, based on the polarizabilities of the rare gases and the observed spectral shifts. Two thermally stable sites of isolation exist for atomic Mn in solid Ar and Kr, while a single thermally stable site is present in Mn/Xe. Site occupancy assignments are based on the application of a polarizability model to the z (6)P(5/2)<--a (6)S(5/2); z (8)P(5/2)<--a (6)S(5/2), and y (6)P(5/2)<--a (6)S(5/2) electronic transitions of atomic Mn. From an analysis of the observed RG matrix-to-gas phase energy shifts for P<--S type transitions, this model allows the association of certain site types occupied by metal atoms in the rare gas solids. The required condition being a linear dependence of the matrix shifts with rare gas polarizability for those metal atoms "trapped" in a particular site type. Application of the polarizability model in conjunction with trends observed in site dominance, established a connection between the blue sites in Ar and Kr and the single site in Xe. Use of the known MgRG ground state bond lengths facilitated an identification of the sites of Mn atom isolation assuming the transference of the known MgRG bond lengths to the MnRG systems. Substitutional site occupancy of atomic Mn is assigned to the blue sites in Ar and Kr and the single site in Xe, while tetra-vacancy site occupancy is assigned to the red sites in Ar and Kr. Consistent with these assignments, Mn atoms in solid Ar show a preference for trapping in tetra-vacancy sites whereas in solid Kr, single substitutional sites are preferred and in Xe, this is the only site observed.     

Photochemistry of Transition-Metal Atoms: Reactions with Molecular Hydrogen and Methane in Low-Temperature Matrices

Reactions of metal atoms with molecular hydrogen and alkanes are prototypical of more complex systems involving metal-mediated reactions in solution, on supports, and on surfaces. The simplicity of metal-atom reactions makes them particularly attractive for fundamental experimental and theoretical studies. Following the first reports of H₂ and CH₄ activation by photoexcited metal atoms in cryogenic matrices, the behavior of a number of transition-metal atoms in their ground and selected electronically excited states has been examined with molecular hydrogen, methane, and ethane. A wealth of structural, electronic, reactivity, and selectivity information is emerging from these studies and it is now becoming possible to recognize the controlling factors at work in these fundamental chemical reactions. In this article, some experimental results for a number of metal-atom systems, in particular, those involving silver, copper, manganese, and iron atoms, are presented along with a discussion of the factors that are believed to be important in the understanding of the observed physical and chemical behavior.     

Luminescence spectroscopy of matrix-isolated atomic manganese: excitation of the "forbidden" a6D(J)<-->a6S transitions

Laser-induced excitation spectra recorded for the electric-quadrupole 3d(6)4s a6D(J)<--3d(5)4s2a6S(5/2) transitions of atomic Mn, allow assignment of the red emission features, previously observed in Mn/RG (RG=Ar, Kr and Xe) matrices with resonance 3d(5)4s4pz6P(5/2)<--3d(5)4s2 a6S(5/2) excitation, to the metastable a6D(9/2) state. Narrow excitation bands recorded for the red site in the Mn/Kr system allow identification of all five spin-orbit levels (J=1/2, 3/2, 5/2, 7/2 and 9/2) in the a6D state. The coincidence of the lowest energy excitation band and the observed 585.75 nm (17,072 cm(-1)) emission band of atomic Mn in Kr matrices, yielded a definitive assignment of this emission to a transition from the J=9/2 spin-orbit level. Temperature dependent emission scans lead to the identification of the zero phonon line for the a6D(9/2)-->a6S(5/2) transition at 585.75 nm. The identified matrix-shift of +20 cm(-1) allows an assessment of the extent of the ground state stabilization in the red (secondary) site of atomic Mn isolation in solid Kr. Emission produced with direct a6D state excitation yielded both the 585.75 and 626 nm features. The former band arises for Mn atoms occupying the red site--the latter from blue site occupancy in solid Kr. The excitation linewidths recorded for these two sites differ greatly, with the blue site yielding a broad featureless profile, in contrast to the narrow, structured features of the red site. The corresponding red site a6D(J)<-->a6S(5/2) transitions in Ar and Xe matrices are broader than in Kr--a difference considered to originate from the site sizes available in these hosts and the interatomic Mn x RG potentials. The millisecond decay times recorded for the red emission bands in the Mn/RG systems are all much shorter than the 3 s value predicted for the gas phase a6D(9/2)-->a6S(5/2) transition. This enhancement allows optical pumping of the forbidden a6D(J)<-->a6S transitions with low laser powers when atomic manganese is isolated in the solid state. However all the emission decays are complex, exhibiting triple exponential decays. This behavior may be related to the dependence of the excitation linewidths on the J value, indicating removal of the J degeneracy due to weak matrix-induced, crystal field splitting.     

Predicting the Tender Price of Buildings during Early Design: Method and Validation

Predictions of the tender price of proposed buildings are needed during early design. Conventionally, these are prepared manually and based on limited data.A computer system was produced which prepares estimates using a library of data containing rate, quantity and date for the constituent elements of previous buildings, inflation indices and statistical models.Because the scatter of the rate vs quantity data for each element in a sample of buildings was so variable between samples, no one model was adequate. Thirty two different models were included, together with a criterion for selecting the most appropriate. This ensured the most precise prediction possible.The co-efficient of variation of the ratio forecast to actual price measured for a set of system-produced estimates grouped by building type ranged from 10 to 19%. Current manual practice ranges from 6 to 21%, but this is only achieved much later when design is complete and more reliable data is available.     

Synthesis of a Two‐Dimensional Covalent Organic Monolayer through Dynamic Imine Chemistry at the Air/Water Interface

A two‐dimensional covalent organic monolayer was synthesized from simple aromatic triamine and dialdehyde building blocks by dynamic imine chemistry at the air/water interface (Langmuir–Blodgett method). The obtained monolayer was characterized by optical microscopy, scanning electron microscopy, and atomic force microscopy, which unambiguously confirmed the formation of a large (millimeter range), unimolecularly thin aromatic polyimine sheet. The imine‐linked chemical structure of the obtained monolayer was characterized by tip‐enhanced Raman spectroscopy, and the peak assignment was supported by spectra simulated by density functional theory. Given the modular nature and broad substrate scope of imine formation, the work reported herein opens up many new possibilities for the synthesis of customizable 2D polymers and systematic studies of their structure–property relationships.     

Visible luminescence spectroscopy of free-base and zinc phthalocyanines isolated in cryogenic matrices

The absorption, emission and excitation spectra of ZnPc and H(2)Pc trapped in Ne, N(2), Ar, Kr and Xe matrices have been recorded in the region of the Q states. A comparison of the matrix fluorescence spectra with Raman spectra recorded in KBr pellets reveals very strong similarities. This is entirely consistent with the selection rules and points to the occurrence of only fundamental vibrational transitions in the emission spectra. Based on this behaviour, the vibronic modes in emission have been assigned using results obtained recently on the ground state with large basis-set DFT calculations [Murray et al. PCCP, 12, 10406 (2010)]. Furthermore, the very strong mirror symmetry between excitation and emission has allowed these assignments to be extended to the excitation (absorption) bands. While this approach works well for ZnPc, coupling between the band origin of the S(2)(Q(Y)) state and vibrationally excited levels of S(1)(Q(X)), limits the range of its application in H(2)Pc. The Q(X)/Q(Y) state coupling is analysed from data obtained from site-selective excitation spectra, revealing pronounced matrix and site effects. From this analysis, the splitting of the Q(X) and Q(Y) states has been determined more accurately than in any previous attempts.     

A two-sided Arnoldi algorithm with stopping criterion and MIMO selection procedure

In this paper we introduce a two-sided Arnoldi method for the reduction of high order linear systems and we propose useful extensions, first of all a stopping criterion to find a suitable order for the reduced model and secondly, a selection procedure to significantly improve the performance in the multi-input multi-output (MIMO) case. One application is in micro-electro-mechanical systems (MEMS). We consider a thermo-electric micro thruster model, and a comparison between the commonly used Arnoldi algorithm and the two-sided Arnoldi is performed.