Molecular Architecture Manipulation in Free Radical Copolymerization: An Advanced Monte Carlo Approach to Screening Copolymer Chains with Various Comonomer Sequence Arrangements

A Kinetic Monte Carlo (KMC) simulation approach has been adopted in this study to capture evolutionary events in the course of free radical copolymerization, through which batch and starved‐feed semibatch processes are compared. The implementation of the KMC code deve­loped in this work: (i) enables satisfactory control of the molecular weight of the copolymer by tracking the profiles of concentrations of macroradicals, monomers, and polymer as well as degree of polymerization, polydispersity, and chain length distribution; (ii) captures the bivariate distribution of chain length and copolymer composition; (iii) comprehensively tracks and analyzes detailed information on the molecular architecture of the growing chains, thus distinguishing between sequence length and polydispersity of chains produced in batch and starved‐feed semibatch operations; (iv) makes possible the screening of products, based on such details as the number and weight fractions of products having different comonomer units located at various positions along the copolymer chains. The aforementioned characteristics are achieved by stochastic calculations through code developed in‐house. This KMC simulator becomes a very useful tool for the development of tailored copolymers through free radical polymerization, with blocks separated with single units of a different type.

     

Electromembrane extraction of gonadotropin‐releasing hormone agonists from plasma and wastewater samples

In the present study, for the first time electromembrane extraction followed by high performance liquid chromatography coupled with ultraviolet detection was optimized and validated for quantification of four gonadotropin‐releasing hormone agonist anticancer peptides (alarelin, leuprolide, buserelin and triptorelin) in biological and aqueous samples. The parameters influencing electromigration were investigated and optimized. The membrane consists 95% of 1‐octanol and 5% di‐(2‐ethylhexyl)‐phosphate immobilized in the pores of a hollow fiber. A 20 V electrical field was applied to make the analytes migrate from sample solution with pH 7.0, through the supported liquid membrane into an acidic acceptor solution with pH 1.0 which was located inside the lumen of hollow fiber. Extraction recoveries in the range of 49 and 71% within 15 min extraction time were obtained in different biological matrices which resulted in preconcentration factors in the range of 82–118 and satisfactory repeatability (7.1 < RSD% < 19.8). The method offers good linearity (2.0–1000 ng/mL) with estimation of regression coefficient higher than 0.998. The procedure allows very low detection and quantitation limits of 0.2 and 0.6 ng/mL, respectively. Finally, it was applied to determination and quantification of peptides in human plasma and wastewater samples and satisfactory results were yielded.     

Techno-economic analysis of new integrated system of humid air turbine,organic Rankine cycle,and parabolic trough collector

Journal of Thermal Analysis and Calorimetry - Microgas turbines are one of the most well-known technologies for distributed generation. Unfortunately, their efficiency is not as high as it should...     

A novel one-pot synthesis of some new interesting pyrrole derivatives

[reaction: see text] 11-(1H-Pyrrol-1-yl)-11H-indeno[1,2-b]quinoxaline and 3-(1H-pyrrol-1-yl)indolin-2-one derivatives have been synthesized in good yields in a novel, one-pot, and efficient process by condensation of 11H-indeno[1,2-b]quinoxalin-11-one or isatin derivatives with 4-hydroxyproline on solid-support montmorillonite K10 under microwave irradiation.     

One‐pot three components synthesis of alkyl indeno [1,2‐b]‐quinoxalin‐11‐ylideneacetates in water and under solvent‐free conditions

We introduced a very simple, one‐pot three component procedure for preparation of alkyl indeno[1,2‐b]quinoxalin‐11‐ylideneacetates 4 from reaction of ninhydrin 1 , phenylenediamines 2 , (alkoxycarbonylmethyl)triphenylphosphonium bromides 3 , and sodium acetate in water and under solvent‐free conditions. © 2005 Wiley Periodicals, Inc. Heteroatom Chem 16:549–552, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20136     

Two-Dimensional Legendre Wavelets for Solving Time-Fractional Telegraph Equation

In this paper, we develop an accurate and efficient Legendre wavelets method for numerical solution of the well known time-fractional telegraph equation. In the proposed method we have employed both of the operational matrices of fractional integration and differentiation to get numerical solution of the time-telegraph equation. The power of this manageable method is confirmed. Moreover, the use of Legendre wavelet is found to be accurate, simple and fast.     

Similitude généralisée et modélisation géométrique à complexité réduiteGeneral similitude solutions and low-complexity geometric models

We present low complexity models for the transport of passive scalars for environmental applications. The model uses partial observations assimilation. Similitude solutions are proposed in a non symmetric metric based on travel times. The approach does not require the solution of any PDE and is mesh free. Also, the solution can be computed in one point only without computing the whole solution. To cite this article: B. Mohammadi, J.-M. Brun, C. R. Mecanique 334 (2006).     

Removal of Amoxicillin from Aqueous Media by Fenton-like Sonolysis/H2O2 Process Using Zero-Valent Iron Nanoparticles

High concentrations of antibiotics have been identified in aqueous media, which has diminished the quality of water resources. These compounds are usually highly toxic and have low biodegradability, and there have been reports about their mutagenic or carcinogenic effects. The aim of this study was to apply zero-valent iron-oxide nanoparticles in the presence of hydrogen peroxide and the sonolysis process for the removal of the amoxicillin antibiotic from aqueous media. In this study, zero-valent iron nanoparticles were prepared by an iron chloride reduction method in the presence of sodium borohydride (NaBH₄), and the obtained nanoparticles were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and vibrating-sample magnetometry (VSM). Then, using a Fenton-like process, synthetic wastewater containing 100 to 500 mg/L amoxicillin antibiotic was investigated, and the effects of different parameters, such as the frequency (1 and 2 kHz), contact time (15 to 120 min), the concentration of hydrogen peroxide (0.3%, 0.5%, and 6%), the dose of zero-valent iron nanoparticles (0.05, 0.1, 0.5 g/L), and pH (3, 5, 10) were thoroughly studied. A pH of 3, hydrogen peroxide concentration of 3%, ultrasonic-wave frequency of 130 kHz, zero-valent iron nanoparticles of 0.5 g/L, and contaminant concentration of 100 mg/L were obtained as the optimal conditions of the combined US/H2O2/nZVI process. Under the optimal conditions of the combined process of zero-valent iron nanoparticles and hydrogen peroxide in the presence of ultrasonic waves, a 99.7% removal efficiency of amoxicillin was achieved in 120 min. The results show that the combined US/H2O2/nZVI process could be successfully used to remove environmental contaminants, including antibiotics such as amoxicillin, with a high removal percentage.     

Effect of frit size on sintering, crystallization and electrical properties of wollastonite glass-ceramics

Wollastonite glass-ceramics were prepared through pressureless sintering. The sinterability of the prepared samples of the glassy powder in the system (SiO₂-CaO-Na₂O-Fe₂O₃-WO₃) was investigated in the temperature range 720-900 °C and soaking time of 180 min. The influence of the increase in the glass powder particle size on the sinterability and dielectric properties of the glass-ceramic samples was studied.The sintered specimens were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD) methods. XRD analysis revealed that wollastonite was the main crystalline phase in the sintered glass-ceramics. Dielectric properties such as dielectric constant and dielectric loss were measured via a network analyzer at 10 GHz.It was observed that the increase of the glassy powder particle size improved the sinterability and dielectric properties of the glass-ceramic specimens. Wollastonite glass-ceramics with 16 μm particle size had maximum constant and minimum loss (ε_r = 10.10 and tan δ = 0.005) compared with the other glass-ceramics.