Luminescent core-shell photonic crystals from poly(phenylene ethynylene) coated silica spheres

We describe the preparation and characterization of a photonic crystal filled with a luminescent conjugated polyelectrolyte, sulfonated poly(phenylene ethynylene). The conjugated polymer was coated onto the nanospheres by the layer-by-layer method and assembled directly into a fluorescent opal structure avoiding the defects associated with post-filling schemes. These structures exhibit strong angle-dependent luminescent properties. By using multiple layers, we further demonstrate control over the emissive bands of the opal.     

Multinuclear NMR studies and ab initio structure calculations of hindered phencyclone diels‐alder adducts from symmetrical cyclic dienophiles: Cyclohexene,vinylene carbonate,vinylene trithiocarbonate and two N‐aryl maleimides

A series of hindered Diels‐Alder adducts have been prepared from phencyclone, 1 , with various unusual symmetrical cyclic dienophiles, including cyclohexene, 2a ; vinylene carbonate, 2b ; vinylene trithiocarbonate, 2c ; and the N‐aryl maleimides: N‐(4‐dimethylamino‐3,5‐dinitrophenyl)maleimide (“Tuppy's maleimide”), 2d ; and N‐[3,5‐bis(trifluoromethyl)phenyl]maleimide, 2e . The highly hindered adducts, 3a‐e , respectively, were extensively characterized by one‐ and two‐dimensional NMR methods, observing proton, carbon‐13 and fluorine‐19. High resolution COSY45 spectra permitted rigorous proton NMR assignments. The 2D heteronuclear C‐H chemical shift correlation spectra (HETCOR, XHCORR) were obtained for adducts 3a‐d , allowing specific assignments for protonated carbons. Corrections to earlier proton NMR assignments for the vinylene carbonate adduct are given; results of the gated decoupling ¹³C NMR experiment for this adduct supported endo adduct stereochemistry. Relative proton chemical shifts for bridgehead phenyls of adduct 3c appeared anomalous relative to other adducts, suggesting possible special anisotropic interactions (with endocyclic sulfur or other anisotropic groups in the product) due to the unusual calculated orientation of the phenyls. The unsubstituted bridgehead phenyls in all adducts were shown to exhibit slow exchange limit (SEL) ¹H and ¹³C spectra on the NMR timescales at ambient temperatures (7 tesla) showing slow rotations about the C(sp³)‐C(aryl sp²) bonds. The rapid rotation of the N‐aryl rings of the maleimide adducts was indicated by fast exchange limit spectra, suggesting that ortho substitution of the N‐aryl ring may be necessary to slow this rotation to the SEL regime. Ab initio geometry optimizations at the Hartree‐Fock level were carried out for each adduct, with the 6‐31G* basis sets. Appreciable geometry differences were seen in calculated structures, and significant NMR chemical shift differences were experimentally observed, depending on the nature of the groups attached to the (Z)‐HC=CH moiety of the dienophiles.     

Compounds with the YbFe2O4Structure Type: Frustrated Magnetism and Spin-Glass Behavior

The YbFe₂O₄structure type consists of triangular layers of lanthanide oxygen octahedra stacked with triangular double layers of transition metal oxygen triangular bipyramids. The crystallographic structures determined by neutron diffraction powder profile analysis at 300 and 11 K for new members of this structural family are reported. The compounds are found to be magnetically frustrated, by both lattice geometry and disorder. The magnetic properties of YbCuGaO₄, LuCuGaO₄, LuZnFeO₄, LuCoGaO₄, and LuCuFeO₄reveal the effects of total spin, spin mixing, and interaction between spins on different sublattices on the magnetic frustration. The magnetism is increasingly frustrated as the spin on the magnetic ions is decreased.     

Phototoxic effects of Hypericum extract in cultures of human keratinocytes compared with those of psoralen

Extracts of Hypericum perforatum (St. John's wort) are used in the treatment of depression. They contain the plant pigment hypericin and hypericin derivates. These compounds have light-dependent activities. In order to estimate the potential risk of phototoxic skin damage during antidepressive therapy, we investigated the phototoxic activity of hypericin extract using cultures of human keratinocytes and compared it with the effect of the well-known phototoxic agent psoralen. The absorbance spectrum of our Hypericum extract revealed maxima in the whole UV range and in parts of the visible range. We cultivated human keratinocytes in the presence of different Hypericum concentrations and irradiated the cells with 150 mJ/cm2 UVB, 1 J/cm2 UVA or 3 h with a white light of photon flux density 2.6 mumol m-2 s-1. The determination of the bromodeoxyuridine incorporation rate showed a concentration- and light-dependent decrease in DNA synthesis with high hypericin concentrations (> or = 50 micrograms/mL) combined with UVA or visible light radiation. In the case of UVB irradiation a clear phototoxic cell reaction was not detected. We found phototoxic effects even with 10 ng/mL psoralen using UVA with the same study design as in the case of the Hypericum extract. These results confirm the phototoxic activity of Hypericum extract on human keratinocytes. However, the blood levels that are to be expected during antidepressive therapy are presumably too low to induce phototoxic skin reactions.     

Synthesis, structure and properties of ruthenium(II) complexes with quinolinedione derivatives as chelate ligands: Crystal structure of [Ru(CO)2Cl2(6-methoxybenzo[g]quinoline-5,10-dione)]

The reaction of the dimer complex [{Ru(CO)₃Cl₂}₂] with the ligands 4,6-dichloroquinoline-5,8-dione and 6-methoxybenzo[g]quinoline-5,10-dione in ethanol solution led to the neutral mononuclear complexes of general formula [Ru(CO)₂Cl₂(κ²-quinolinedione-N,O)]. The complexes were characterized by elemental analysis, IR and RMN spectroscopy, and the molecular structure of [Ru(CO)₂Cl₂(6-methoxybenzo[g]quinoline-5,10-dione)] was determined by single-crystal X-ray diffraction. The redox chemistry of ligands and complexes was investigated by cyclic voltammetry, and their potential antitumor activity was also evaluated.     

A synthetic approach to bicyclo[6.2.1]undecane ring systems

A synthesis of a functionalized bicyclo[6.2.1]undecane, N-(7-hydroxymethyl-bicyclo[6.2.1]undeca-3,5,9-trien-2-yl)-4-methyl-benzenesulfonamide, is described. Starting with a [6+4] cycloaddition between cyclopentadiene and cycloheptatrienone, the final product was prepared in five steps with an overall 37% yield. The remarkable resistance to hydrolysis of an intermediate lactam was overcome by tosylating the amide and reducing with LiAlH₄.     

Crystalline polysilicate magadiite with intercalated n-alkylmonoamine and some correlations involving thermochemical data

Synthesized hydrated lamellar acidic crystalline magadiite (H₂Si₁₄O₂₉·2H₂O) nanocompound was used as host for intercalation of polar n-alkylmonoamine molecules of the general formula H₃C(CH₂)_nNH₂ (n = 1–6) in aqueous solution. The original interlayer distance (d) of 1500 pm, determined by X-ray powder diffraction patterns, increases after intercalation. The values correlated with the number of aliphatic amine carbon (n_c) atoms: d = [(1312 ± 11) + (21 ± 2)]n_c. The amount of intercalated amines (N_s), decreased as n_c increased: N_s = [(5.82 ± 0.04) − (0.45 ± 0.01)]n_c. The acidic layered nanocompound was calorimetrically titrated with the amines and the thermodynamic data gave exothermic values for all guest molecules, as shown by the correlation: Δ_intH = −[(24.45 ± 0.49) − (1.91 ± 0.10)]n_c and d = [(1576 ± 16) − (10.8 ± 1.0)]Δ_intH. The negative values of the Gibbs energies and the positive entropies also presented the correlations: Δ_intG = −[(22.8 ± 0.2) − (0.2 ± 0.1)]n_c and Δ_intS = [(6 ± 1) + (5 ± 1)]n_c, respectively.     

Density functional theory of solvation and its relation to implicit solvent models

We describe a density functional theory approach to solvation in molecular solvents. The solvation free energy of a complex solute can be obtained by direct minimization of a density functional, instead of the thermodynamic integration scheme necessary when using atomistic simulations. In the homogeneous reference fluid approximation, the expression of the free-energy functional relies on the knowledge of the direct correlation function of the pure solvent. After discussing general molecular solvents, we present a generic density functional describing a dipolar solvent and we show how it can be reduced to the conventional implicit solvent models when the solvent microscopic structure is neglected. With respect to those models, the functional includes additional effects such as the microscopic structure of the solvent, the dipolar saturation effect, and the nonlocal character of the dielectric constant. We also show how this functional can be minimized numerically on a three-dimensional grid around a solute of complex shape to provide, in a single shot, both the average solvent structure and the absolute solvation free energy.     

Single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization of vinyl chloride catalyzed by thiourea dioxide/octyl viologen in water/tetrahydrofuran at 25 °C

The single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization (SET–DTLRP) of vinyl chloride (VC) in H₂O/tetrahydrofuran at 25 °C catalyzed by thiourea dioxide [(NH₂)₂C?SO₂] is reported. This polymerization occurs only in the presence of a basic sodium bicarbonate (NaHCO₃) buffer and the electron‐transfer cocatalyst octyl viologen. The resulting poly(vinyl chloride) (PVC) has a number‐average molecular weight of 1500–7000 and a weight‐average molecular weight/number‐average molecular weight ratio of 1.5. This PVC does not contain detectable amounts of structural defects and has both active chloroiodomethyl and inactive chloromethyl chain ends. Because of possible side reactions caused by the primary sulfoxylate anion (SO), the catalytic activity of (NH₂)₂C?SO₂ in the SET–DTLRP of VC is lower than that of the single‐electron‐transfer agent sodium dithionite. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 287–295, 2005