Optimisation of chiral separation of omeprazole and one of its metabolites on immobilized α1-acid glycoprotein using chemometricsglycoprotein using chemometrics

Summary A strategy for the optimisation of direct chiral separation of omeprazole and a metabolite, hydroxi-omeprazole, in reversed phase liquid chromatography is described. A factorial design was used, where mobile phase pH, concentration of a mobile phase modifier, ionic strength and column temperature were tested as the variables and enantioselective retention, column efficiency and asymmetry factor as the responses. The experimental results were evaluated with multivariate analyses, which demonstrated that the column temperature and content of mobile phase acetonitrile were by far the most important variables. The enantiomers of omeprazole and one of its metabolites were baseline resolved within 15 minutes. The optimised chromatographic system was used for a separation of the enantiomers of omeprazole and its main metabolite in a patient plasma sample.     

Use of α‐diketones as visible photoinitiators for the photocrosslinking of waterborne latex paints

The efficiency of several α‐diketones as visible light photoinitiators for the crosslinking of waterborne latex dispersions in the presence of acrylic monomers was evaluated. Among the eight α‐diketones studied, camphorquinone allows the fastest curing speed, and the curing of the acrylic waterborne coating is not affected by the presence of oxygen. The properties of the sunlight‐cured volatile organic compound (VOC)‐free pigmented paints prepared from the waterborne latex are as good or better than the equivalent conventional paint containing VOCs. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3171–3181, 2002     

A model explaining declining rate in hydrolysis of lignocellulose substrates with cellobiohydrolase I (cel7A) and endoglucanase I (cel7B) of Trichoderma reesei

It is commonly observed that the rate of enzymatic hydrolysis of solid cellulose substrates declines markedly with time. In this work the mechanism behind the rate reduction was investigated using two dominant cellulases of Trichoderma reesei: exoglucanase Cel7A (formerly known as CBHI) and endoglucanase Cel7B (formerly EGI). Hydrolysis of steam-pretreated spruce (SPS) was performed with Cel7A and Cel7B alone, and in reconstituted mixtures. Throughout the 48-h hydrolysis, soluble products, hydrolysis rates, and enzyme adsorption to the substrate were measured. The hydrolysis rate for both enzymes decreases rapidly with hydrolysis time. Both enzymes adsorbed rapidly to the substrate during hydrolysis. Cel7A and Cel7B cooperate synergistically, and synergism was approximately constant during the SPS hydrolysis. Thermal instability of the enzymes and product inhibition was not the main cause of reduced hydrolysis rates. Adding fresh substrate to substrate previously hydrolyzed for 24 h with Cel7A slightly increased the hydrolysis of SPS; however, the rate increased even more by adding fresh Cel7A. This suggests that enzymes become inactivated while adsorbed to the substrate and that unproductive binding is the main cause of hydrolysis rate reduction. The strongest increase in hydrolysis rate was achieved by adding Cel7B. An improved model is proposed that extends the standard endo-exo synergy model and explains the rapid decrease in hydrolysis rate. It appears that the processive action of Cel7A becomes hindered by obstacles in the lignocellulose substrate. Obstacles created by disordered cellulose chains can be removed by the endo activity of Cel7B, which explains some of the observed synergism between Cel7A and Cel7B. The improved model is supported by adsorption studies during hydrolysis.     

Enantioselective synthetic thalidomide receptors based upon DNA binding motifs

A series of molecularly imprinted polymer (MIP) synthetic receptors selective for the sedative thalidomide (5) have been designed and synthesized based upon the functional monomer 9-(2'-methacryloyloxyethyl)adenine (2). (1)H-NMR studies were used to establish the existence of DNA-like binding interactions between 2 and the template (5). A series of ethylene glycol dimethacrylate cross-linked copolymers was synthesized using either 2 or methacrylic acid, or a combination of these functional monomers. Zonal HPLC studies demonstrated enantioselectivity (alpha = 2.11) and ligand selectivity which could be attributed to the interaction of 2 with the imide moiety of 5. Compound 2 provided a more significant contribution to the binding of 5 than methacrylic acid, though a combination of these two functional monomers resulted in improved enantioselectivity. Frontal chromatographic and batch binding studies confirmed the observed differences in affinity of the imprinted and reference polymers for the template.     

The roles of template complexation and ligand binding conditions on recognition in bupivacaine molecularly imprinted polymers

A model for the molecular basis for ligand recognition in bupivacaine imprinted methacrylic acid-ethylene glycol dimethacrylate co-polymers has been developed based upon a series of (1)H-NMR studies in conjunction with HPLC and radioligand binding analyses. (1)H-NMR studies indicated that functional monomer-template complexes survive the polymerisation process, at least up until the stage of gelation. Polymers were synthesised and characterised by surface area analysis (BET), FT-IR and SEM. A combination of zonal and frontal chromatographic studies in aqueous and non-polar media indicate that selectivity arises from a combination of hydrophobic and electrostatic interactions. However, in the concentration regime employed for LC-based studies, ligand recognition in aqueous media was shown to be predominantly non-specific and hydrophobic in character. Radioligand binding studies, in lower ligand binding concentration regimes, permitted closer examination of the higher affinity binding sites. It was shown that the presence of a polar modifier in a non-polar solvent, or an organic modifier in water, produced enhanced selectivity. Variable temperature studies showed that the temperature of binding influences selectivity as well as the apparent number of sites available and that this effect is different in organic and aqueous environments. This indicates that the system studied is more complex in character than is generally appreciated. A comparison of the techniques employed here indicates that although chromatographic studies provide a valuable first-round screen for polymer-ligand selectivities, the level of detail obtainable using radioligand binding studies (lower concentrations and true equilibrium binding) makes them superior for detailed evaluations of molecularly imprinted polymers.     

Usage of nonporous polymeric particles for reversed-phase high-performance liquid chromatography of oxidized and deamidated forms of recombinant human growth hormone

In this work, a C(18) reversed-phase column with nonporous polymeric 2.5- micro m particles is utilized to initially test the analysis of oxidized and deamidated human growth hormone (hGH). Phosphate buffer (pH 7.5) with 24% 1-propanol was used for elution. This quick method (analysis time is 20 min) gave a selectivity, as judged by the number of detected peaks, and resolution of hGH variants that is better than many methods in which porous silica particle columns are used. Only mixtures of oxidized and deamidated hGH are analyzed, and no characterization of the peaks is performed. The results indicate that C(18) nonporous polymeric column material is a promising alternative for the chromatographic separation of several hGH variants.     

Electron image series reconstruction of twin interfaces in InP superlattice nanowires

The twin interface structure in twinning superlattice InP nanowires with zincblende structure has been investigated using electron exit wavefunction restoration from focal series images recorded on an aberration-corrected transmission electron microscope. By comparing the exit wavefunction phase with simulations from model structures, it was possible to determine the twin structure to be the ortho type with preserved In-P bonding order across the interface. The bending of the thin nanowires away from the intended 110 axis could be estimated locally from the calculated diffraction pattern, and this parameter was successfully taken into account in the simulations.     

Solid-phase extraction and gas chromatographic-mass spectrometric identification of degradation products from enhanced environmentally degradable polyethylene

A solid-phase extraction (SPE) method using unbonded silica (Si) and silica bonded with octadecyl (C₁₈) or aminopropyl (NH₂) groups was developed to separate into five fractions the highly complex mixture of low-molecular-mass degradation products formed from degradable polymers. Application of the method to polyethylene modified with starch and/or a pro-oxidant system, degraded for 30 weeks in water at 95°C, enabled the identification by GC-MS of over three times as many products as when the sample was prepared by liquid-liquid extraction. Over 60 degradation products were identified in each sample; mainly dicarboxylic acids, monocarboxylic acids and n-alkanes. In addition, several lactones, aldehydes and alcohols were detected.     

Use of immobilized amyloglucosidase as chiral selector in chromatography. Control of enantioselective retention and resolution in liquid chromatography

Summary Several mobile phase parameters were investigated for controlling enantioselective retention and resolution on a chiral stationary phase made in-house. The chiral selector was the enzyme amyloglucosidase, which was immobilized onto a silica support via reductive amination. The influences of the mobile phase pH, concentration and type of uncharged organic modifier, ionic strength and column temperature on enantios-electivity were studied. The analysis time for resolving enantiomers could be adjusted with only a minor decrease in enantioselectivity by using a high ionic strength mobile phase buffer. This indicated a retention mechanism involving ion-exchange interactions. It was further confirmed by the decreasing enantioselectivity of amines when using a mobile phase pH below the isoelectric point of the native protein. Interesting effects were observed when the organic modifier concentration was increased and also when the column temperature was raised. Both retention and enantioselectivity increased with increasing concentration of 2-propanol in the mobile phase. Examples are given where both enantioselectivity and retention increased with increasing column temperature. Thermodynamic studies were performed to calculate the entropy and enthalpy constants. The results showed that, depending on mobile phase composition, the enantioselective retention may be caused by differences in entropy or enthalpy.     

Thermal analysis for the assessment of antioxidant content in polyethylene

Dynamic differential thermal analysis (DTA) data on a series of polyethylene (PE) samples containing known contents of two primary (phenol and amine) and two secondary (thioester and phosphite) antioxidants are presented. It is shown that the dynamic method, in which the temperature of the start of an exothermal oxidation reaction is measured during a constant heating rate experiment performed in an oxygen atmosphere, can be used as an analytical tool by which the antioxidant content can be determined. A relationship between the oxidation temperature and the concentration of antioxidant is derived on the assumption that the antioxidant consumption follows zero-order kinetics and that the rate constant may be defined in accordance with the Arrhenius equation. This equation fits the presented experimental data for samples with intimately mixed antioxidant.