Proton spectra from the 6,7Li(γ,p) 5,6He reactions at Eγ = 60 MeV

The ${}^{\mathrm{6,7}}\text{Li}\text{(γ,}\text{p}\text{)}$ reactions have been investigated for E_γ = 60 MeV. Excitation of residual (1p)^?1 and (1s)^?1 hole states is evident from the proton spectra measured at ?_p = 45°. The data are compared with a theoretical calculation which includes short-range correlations.     

High resolution Ne KLL Auger spectra produced by H+ and He+ bombardment

Ne KLL Auger satellite lines are measured with an energy resolution of 0.02% FWHM. The relative intensities of initial 2p vacancy satellite lines are observed to be four times larger with He⁺ than with H⁺ bombardment. The He⁺ beam also produces new satellite lines which are assigned to double initial 2p vacancies.     

The Incorporation of Titania into Modified Silicates for Solar Photodegradation of Aqueous Species

A new class of sol-gel-derived photocatalytic materials has been synthesized and used in solar-assisted photodegradation studies. The materials are comprised of a homogeneous dispersion of commercial TiO₂ powder into silica and organically modified silicate (Ormosil) hosts. The efficiency of the photocatalytic properties of these TiO₂-containing materials was determined by their relative performance in the solar photodecomposition of aqueous rhodamine B. The improved adsorption properties of the modified materials compared to commercial TiO₂ increase the photodecomposition rate and the buoyancy properties, although excess hydrophobicity decreases the wetted section of the catalyst and its photocatalytic performance. These materials can be used as floatable catalysts for solar-assisted water purification.     

Unexpected differences in the alpha-halogenation and related reactivity of sulfones with perhaloalkanes in KOH-t-BuOH

Most alkyl phenyl sulfones are readily alpha-chlorinated with CCl(4) and alpha-brominated with CBrCl3 in KOH-t-BuOH via radical-anion radical pair (RARP) reactions. While isopropyl mesityl sulfone (4) is easily alpha-chlorinated with CCl(4), it was completely recovered when treated with the more reactive CBrCl3. Subsequent investigations showed the latter result to be due to the poor acidity of 4 together with the rapid depletion of CBrCl3 and KOH by their reaction with each other, and led to a variety of other important results. 4-Hydroxyphenyl isopropyl sulfone (6) is unreactive with either CCl4 or CBrCl3 in KOH-t-BuOH, its phenoxide anion strongly reducing the electronegativity of the sulfonyl group, thereby inhibiting alpha-anion formation. This effect is reversed by the electron-withdrawing influence of two alpha-phenyls, so that benzhydryl 4-hydroxyphenyl sulfone (8) is readily alpha-halogenated in KOH-t-BuOH with CCl4 or CBrCl3. On further contact with KOH-t-BuOH the alpha-halogenated sulfones from 8 are decomposed into benzophenone and phenol. While the alpha-halogenated derivatives of 4-methoxyphenyl benzhydryl sulfone (9) are stable to base, they are decomposed even under mildly acidic conditions into 4-methoxyphenyl 4-methoxybenzenethiolsulfonate (9c), phenol, and benzophenone. Mono-alpha-halogenation of benzyl phenyl sulfone (10) enhances the rate of the subsequent halogenation, so that alpha,alpha-dihalogenation is attained while much substrate is still present and the mono-alpha-halogenated product is not detected. The ease of reductive debromination of alpha-bromo sulfones with Cl3C- was correlated with the stability of the formed alpha-anions, explaining the success with alpha-bromobenzylic sulfones but failure with alpha-bromoalkyl sulfones. In the presence of air and the absence of competing halogenation, formation of the alpha-anions of alkyl aryl sulfones is quickly accompanied by oxidative cleavage by atmospheric O2, leading to the formation of arenesulfonyl alcohols, arenesulfonyl halides, and haloarenes.     

Crystal structures of dicarboxy-2,2'-bipyridyl complexes: the role of hydrogen bonding and stacking interactions

The crystal structures of three complexes of dicarboxy-2,2'-bipyridyl ligands, 5,5'-dicarboxy-2,2'-bipyridyl (1) and 4,4'-dicarboxy-2,2'-bipyridyl (2) are reported. [Rh(1H)3] shows two interpenetrating, homochiral rhombohedral networks linked by short carboxylate-carboxylic acid hydrogen bonds, in which each complex acts as a node for six hydrogen bonds. [Ru(1H2)(1H)2] forms only four such hydrogen bonds, leading to the formation of heterochiral chains held together by stacking between bipyridyls. [Co(2H)3] can in principle form six hydrogen bonds, but in practice forms only four in a layer structure where stacking interactions are important. This is attributed to differences in molecular shape.     

SENSITIVITY OF Porphyromonas AND Prevotella SPECIES IN LIQUID MEDIA TO ARGON LASER

Abstract— The phototoxicity of argon laser irradiation was studied in aqueous suspensions of Porphyromonas endodontalis (American Type Culture Collection [ATCC] 35406), Porphyromonas gingivalis (ATCC 33277), Prevotella denticola (ATCC 33184) and two strains of Prevotella intermedia (ATCC 15033 and 49046), all "black-pigmented bacteria," BPB, that accumulate cellular porphyrins. Several of these species have been implicated in the etiology of Periodontol disease. Non-black-pigmented bacteria were also studied to test the specificity of irradiation as a potential photodynamic treatment for Periodontol infections. Cell suspensions were irradiated with an argon laser at fluences of 20–200 J/cm². When cultured in hemin-supplemented media, ATCC 15033 was the most sensitive to irradiation. However, a second strain of the same species (ATCC 49046) was resistant. The photosensitivity of other species ranked ATCC 33277 > 35406 = 33184 = 35496. When hemin was replaced in media by hemoglobin, ATCC 33277 became resistant to irradiation. Protoporphyrin IX content in BPB cells was shown not to be a major factor determining photosensitivity. Oxygen was required during irradiation for BPB species to be affected. Non-black-pigmented bacteria were much less sensitive to irradiation than BPB.     

Solid state studies of drugs and chemicals by dielectric and calorimetric analysis

Novel dielectric behavior of a linear increase in ionic conductivity prior to melt temperature was observed for active pharmaceutical ingredients (APIs), organic chemicals, amino acids, and carbohydrates. Though, there are solids like polyolefins and long chain organic compounds (tetracosane, pentacosane) which do not exhibit this premelt behavior (i.e., the temperature where the onset of increase in ionic conductivity to melt temperature). We have discovered novel electrical conductivity properties and other physical analytical variations which can lead to unique synthetic routes of certain chemical entities. The above-mentioned unique variations are not related to solid–solid transitions which are quite often observed in pharmaceutical crystalline solids. These new properties are related to amorphous crystalline behavior of a solid. We have also studied the effect of various experimental variables: such as amount of mass tested, applied frequency at a given electric field and heating rate, which results in varying the onset temperature of the increase in ionic conductivity. Melting of the solids was correlated using differential scanning calorimetry (DSC). Activation energies for all the solids were measured in the premelt region using an Arrhenius plot at a specific frequency since we observed changes in the conductivity with frequency. This study focused on frequencies 0.1 to 10 Hz, since the conductivity at these frequencies related to surface analysis. This new physical properties are leading to new electro synthetic procedures to modify or prepare chemicals.     

Thermally-induced dielectric relaxation spectra in three aldohexose monosaccharides

Three aldohexose monosaccharides, d-glucose, d-mannose, and d-galactose, were examined by scanning temperature dielectric analysis (DEA) from ambient temperatures through their melts. Phase transitions, including glass transition (T _g) and melting temperature (T _m), were evaluated by differential scanning calorimetry (DSC). The monosaccharides were found to exhibit thermally-induced dielectric loss spectra in their amorphous-solid phase before melting. Activation energies for electrical charging of each of the monosaccharides were calculated from an Arrhenius plot of the tan delta (e″/e′, dielectric loss factor/relative permittivity) peak frequency versus reciprocal temperature in Kelvin. The DEA profiles were also correlated with the DSC phase diagrams, showing the changes in electrical behavior associated with solid–solid and solid–liquid transitions.     

Near-thermal reactions of Au(+)(1S,3D) with CH3X (X = F,Cl)

Reactions of Au(+)((1)S) and Au(+)((3)D) with CH(3)F and CH(3)Cl have been carried out in a drift cell in He at a pressure of 3.5 Torr at both room temperature and reduced temperatures in order to explore the influence of the electronic state of the metal on reaction outcomes. State-specific product channels and overall two-body rate constants were identified using electronic state chromatography. These results indicate that Au(+)((1)S) reacts to yield an association product in addition to AuCH(2)(+) in parallel steps with both neutrals. Product distributions for association vs HX elimination were determined to be 79% association/21% HX elimination for X = F and 50% association/50% HX elimination when X = Cl. Reaction of Au(+)((3)D) with CH(3)F also results in HF elimination, which in this case is thought to produce (3)AuCH(2)(+). With CH(3)Cl, Au(+)((3)D) reacts to form AuCH(3)(+) and CH(3)Cl(+) in parallel steps. An additional product channel initiated by Au(+)((3)D) is also observed with both methyl halides, which yields CH(2)X(+) as a higher-order product. Kinetic measurements indicate that the reaction efficiency for both Au(+) states is significantly greater with CH(3)Cl than with CH(3)F. The observed two-body rate constant for depletion of Au(+)((1)S) by CH(3)F represents less than 5% of the limiting rate constant predicted by the average dipole orientation model (ADO) at room temperature and 226 K, whereas CH(3)Cl reacts with Au(+)((1)S) at the ADO limit at both room temperature and 218 K. Rate constants for depletion of Au(+)((3)D) by CH(3)F and CH(3)Cl were measured at 226 and 218 K respectively, and indicate that Au(+)((3)D) is consumed at approximately 2% of the ADO limit by CH(3)F and 69% of the ADO limit by CH(3)Cl. Product formation and overall efficiency for all four reactions are consistent with previous experimental results and available theoretical models.     

The Effect of Silver Perchlorate of the Reaction of Trialkyl Phosphite with α-Halogenoketones

Abstract

Trialkyl phosphites are known to react with α-halogenoketones to yield β-ketophosphonates (Arbuzov product) or vinyl phosphates (Perkow product) according to coniiitions.¹ α-Hydroxyphosphonate may be formed in addition, in prcltic media.² We have now shown that none of these products is formed in the presence of silver perchlorate (in benzene sclutim); nor could we detect the ketophosphonium perchlorate reported previously. Phosphorus-31 nmr showed the formation of trimethyl phosphate and tetramethyl pyrophosphate as the exclusive phosphorus-containing products. The sequence of possible reaction is complex and the overall stoichiometry may vary somewhat according to the rate and order of rixing. Trialkyl phosphate could be formed by elimination of alkyne from vinyloxyphosphonium intermediate produced together with silver iodine in first stage of the interaction. Pyrophosphate formation would then result from nucleophilic attack of trimethyl phosphate on the trimethoxy(1-nethylvinyloxy)phosphoniun ion, which may be formed as a reactive intermediate. Evidence for formation of methyl perchlorate in the final dealkylation of the quasiphosphonium intermediate is provided by proton nmr spectroscopy and by the formation of the N-methylquino-linium salt on addition of quinoline. No change in the ³¹P nmr spectrum occurs at this stage. Other by-products of the main reactions include the dehalogenated ketone (acetone from iodoacetone or acetnphenone from α-iodoacetophenone).