Salvinicins A and B, new neoclerodane diterpenes from Salvia divinorum

[reaction: see text] Two new neoclerodane diterpenes, salvinicins A (4) and B (5), were isolated from the dried leaves of Salvia divinorum. The structures of these compounds were elucidated by spectroscopic techniques, including (1)H and (13)C NMR, NOESY, HMQC, and HMBC. The absolute stereochemistry of these compounds was assigned on the basis of single-crystal X-ray crystallographic analysis of salvinicin A (4) and a 3,4-dichlorobenzoate derivative of salvinorin B.     

Stability and Structure of Activated Macrocycles. Ligands with Biological Applications

Single p-toluic acid pendant groups were attached to 1,4,7,10,13-pentaazacyclopentadecane (15aneN5) and 1,4,8,11-tetraazacyclotetradecane (cyclam) to prepare bifunctional reagents for radiolabeling monoclonal antibodies with (64,67)Cu. The ligands are 1,4,7,10,13-pentaazacyclopentadecane-1-(alpha-1,4-toluic acid) (PCBA) and 1,4,8,11-tetraazacyclotetradecane-1-(alpha-1,4-toluic acid) (CPTA). For the parent macrocycles and their pendant arm derivatives, the 1:1 Cu(2+) complexes dissociate only below pH 2. At pH 0.0 and 25 degrees C the CPTA-Cu complex has a half-life toward complete dissociation of 24 days. A new approach was developed for the estimation of the Cu(2+) stability constant for the kinetically robust CPTA. All other formation constants were determined at 25.0 degrees C with batch spectrophotometric techniques. Potentiometric titrations were used to determine the protonation constants of the macrocyclic ligands as well as of the metal chelates. The protonation constants, stability constants, and pM's are discussed in terms of both molecular mechanics calculations and the ligands' potential applicability as copper(II) radiopharmaceuticals.     

Synthetic reactions catalyzed by immobilized lipase from oilseed rape (Brassica napus L.)

Lipase from rape (Brassica napus L., immobilized onto celite, catalyzes esterification and transesterification reactions in hexane. The activity of the lipase is stimulated up to 35 fold by the addition of water (1.3% w/v). The activity of the lipase in hydrolysis is about 8 times higher than in the esterification reactions in hexane. Interesteri-fication reactions between mono- and diacylglycerols and transesterification reactions of mono- and diacylglycerols with alcohols were also catalyzed at relatively high rates but transesterification/esterification of these acylglycerols with fatty acids was comparatively slow. In transesterification reactions, triacylglycerols reacted rather slowly.     

Diastereoselective intermolecular rhodium-catalyzed [4 + 2 + 2] carbocyclization reactions: computational and experimental evidence for the intermediacy of an alternative metallacycle intermediate

Intermolecular rhodium-catalyzed [m + n + o] reactions of 1,6-enynes and various pi-components (carbon monoxide, alkynes, 1,3-butadienes, etc.) provide an expeditious approach for the construction of polycyclic fragments that represent important synthons for target-directed synthesis. We present computational and experimental evidence for the existence of a previously undescribed reaction pathway for the rhodium-catalyzed [4 + 2 + 2] reaction involving a 1,6-enyne. This model clearly demonstrates the origin of the excellent diastereoselectivity in this type of reaction and the remarkable tolerance of both (E)- and (Z)-isomers within the 1,6-enyne, which is generally prone to competitive ene-cycloisomerization.     

Competing reaction pathways from α-halo-α-protioalkyl aryl sulfoxides initiated by organometallic reagents

The reactions of syn-1-haloethyl p-chlorophenyl sulfoxides (halogen = Cl, Br) with main-group organometallic reagents (n-BuMgCl, MeLi, n-BuLi, s-BuLi, and t-BuLi) in THF and PhMe solvents were examined. Product distributions were analyzed to determine the extent of competing sulfoxide ligand exchange, halogen-metal exchange, and deprotonation reaction pathways. A combination of t-BuLi in PhMe was optimal for initiation of sulfoxide ligand exchange from syn-1-chloroethyl p-chlorophenyl sulfoxide.     

On the choice of active space orbitals in MCSCF calculations

We describe a procedure which may be used to aid selection of the active space in multiconfigurational self-consistent field (MCSCF) calculations for general chemical systems. Starting from a restricted Hartree-Fock calculation, we define a hierarchy of interacting virtual orbitals for every occupied orbital. The most strongly interacting orbitals are then taken to constitute the active space in a configuration interaction (CI) calculation. The natural orbital occupation numbers obtained from the CI calculation are then used to choose the active space to be used in a subsequent MCSCF calculation. We illustrate our method on a number of systems (Li₂, B₂, C₂, carbonyl oxide and the transition state for oxidation of H₂S by dioxirane). In all these cases, ‘intuitive’ active spaces are inadequate, as are active spaces derived from the natural orbitals of unrestricted Hartree-Fock calculations.     

Conformation and luminescence of isolated molecular semiconductor molecules

In this article, we describe, for the first time, direct comparisons of the detailed structures of two small molecule organic semiconductors, oligo(phenylenvinylene) (OPV) molecules with chains of five and six phenyl rings (5R-OC(8)H(17) and 6R-OC(8)H(17)), respectively, and their luminescence properties on a single molecule level. Our data originate from a combination of two powerful diagnostic tools in physical chemistry: ion mobility and single molecule fluorescence spectroscopy. These techniques enable us to precisely determine the shapes of isolated molecules in the gas phase and to correlate these structures to the emission from single molecules supported on bare glass substrates. The principal structural uncertainty in OPVs is the (possible) presence and location of cis-vinylene linkages (cis-defects) in the oligomer. The results show that the structures observed in the gas phase are strongly correlated to the categories of molecules observed in the single molecule polarization anisotropy measurements with nearly identical distributions for the two OPV molecules studied. Each category is also characterized by the luminescence efficiency of the molecules in each class, providing a direct correlation between the luminescence efficiency and the shape of the molecule. This combination of techniques provides a level of information far beyond that obtained via any other analytical technique.     

Aggregation and solubility behavior of asphaltenes and their subfractions

Asphaltenes from four different crude oils (Arab Heavy, B6, Canadon Seco, and Hondo) were fractionated in mixtures of heptane and toluene and analyzed chemically, by vapor pressure osmometry (VPO), and by small angle neutron scattering (SANS). Solubility profiles of the asphaltenes and their subfractions indicated strong cooperative asphaltene interactions of a particular subfraction that is polar and hydrogen bonding. This subfraction had lower H/C ratios and modestly higher N, V, Ni, and Fe contents than the less polar and more soluble subfraction of asphaltenes. VPO and SANS studies indicated that the less soluble subfractions formed aggregates that were considerably larger than the more soluble subfractions. In general, asphaltene aggregate size increased with decreasing solvent aromaticity up to the solubility limit, beyond which the aggregate size decreased with heptane addition. The presence of a low wavevector Q feature in the scattering curves at 25 degrees C indicated that the individual aggregates were flocculating; however, the intensity of the feature was diminished upon heating of the samples to 80 degrees C. The solubility mechanism for Canadon Seco asphaltenes, the largest aggregate formers, appears to be dominated by aromatic pi-bonding interactions due to their low H/C ratio and low nitrogen content. B6 and Hondo asphaltenes formed similar-sized aggregates in heptol and the solubility mechanism is most likely driven by polar interactions due to their relatively high H/C ratios and high nitrogen contents. Arab Heavy, the least polar asphaltene, had a H/C ratio similar to Canadon Seco but formed the smallest aggregates in heptol. The enhancement in polar and pi-bonding interactions for the less soluble subfraction indicated by elemental analysis is reflected by the aggregate size from SANS. The less soluble asphaltenes contribute the majority of species responsible for aggregation and likely cause many petroleum production problems such as pipeline deposition and water-in-oil emulsion stabilization.     

The influence of substituent groups on the resonance stabilization of benzene. An ab initio computational study

Accurate G3(MP2) calculations of the enthalpies of formation (Delta(f)H298) of organic molecules permit replication and extension of calculations that were formerly dependent on experimental thermochemical results. A case in point is Kistiakowski's classical calculation of the total stabilization enthalpy of benzene relative to that of cyclohexene, called for many years the "resonance energy". This paper investigates extension of the classical calculation to substituted benzenes. Slight modification of the usual procedure for Delta(f)H298 determination permits exclusion of all empirical information, leaving a purely ab initio result. Stabilization enthalpies relative to the corresponding 4-substituted cyclohexenes are presented for benzene, toluene, aniline, phenol, phenylacetylene, styrene, ethylbenzene, and phenylhydrazine. In the process of calculating these stabilization enthalpies, we have also obtained 42 values of Delta(f)H298 for monosubstituted benzenes, cyclohexenes, and cyclohexanes, 24 of which are not in the standard reference literature. For the remaining 18 G3(MP2) results, the unsigned mean difference between calculated Delta(f)H298 values and experimental results is +/-0.91 kcal x mol(-1).     

Origin of enantioselection in chiral alcohol oxidation catalyzed by Pd[(-)-sparteine]Cl2

A kinetic investigation into the origin of enantioselectivity for the Pd[(-)-sparteine]Cl(2)-catalyzed aerobic oxidative kinetic resolution (OKR) is reported. A mechanism to account for a newly discovered chloride dissociation from Pd[(-)-sparteine]Cl(2) prior to alcohol binding is proposed. The mechanism includes (1) chloride dissociation from Pd[(-)-sparteine]Cl(2) to form cationic Pd(-)-sparteine]Cl, (2) alcohol binding, (3) deprotonation of Pd-bound alcohol to form a Pd-alkoxide, and (4) beta-hydride elimination of Pd-alkoxide to form ketone product and a Pd-hydride. Utilizing the addition of (-)-sparteine HCl to control the [Cl(-)] and [H(+)] and the resulting derived rate law, the key microscopic kinetic and thermodynamic constants were extracted for each enantiomer of sec-phenethyl alcohol. These constants allow for the successful simulation of the oxidation rate in the presence of exogenous (-)-sparteine HCl. A rate law for oxidation of the racemic alcohol was derived that allows for the successful prediction of the experimentally measured k(rel) values when using the extracted constants. Besides a factor of 10 difference between the relative rates of beta-hydride elimination for the enantiomers, the main enhancement in enantiodetermination results from a concentration effect of (-)-sparteine HCl and the relative rates of reprotonation of the diastereomeric Pd-alkoxides.