Ammine magnesium borohydride complex as a new material for hydrogen storage: structure and properties of Mg(BH4)2.2NH3

The ammonia complex of magnesium borohydride Mg(BH4)2.2NH3 (I), which contains 16.0 wt % hydrogen, is a potentially promising material for hydrogen storage. This complex was synthesized by thermal decomposition of a hexaaammine complex Mg(BH4)2.6NH3 (II), which crystallizes in the cubic space group Fm3 m with unit cell parameter a=10.82(1) A and is isostructural to Mg(NH3) 6Cl2. We solved the structure of I that crystallizes in the orthorhombic space group Pcab with unit cell parameters a=17.4872(4) A, b=9.4132(2) A, c=8.7304(2) A, and Z=8. This structure is built from individual pseudotetrahedral molecules Mg(BH4)2.2NH3 containing one bidentate BH4 group and one tridentate BH4 group that pack into a layered crystal structure mediated by N-H...H-B dihydrogen bonds. Complex I decomposes endothermically starting at 150 degrees C, with a maximum hydrogen release rate at 205 degrees C, which makes it competitive with ammonia borane BH 3NH3 as a hydrogen storage material.     

How nitrogenase shakes--initial information about P-cluster and FeMo-cofactor normal modes from nuclear resonance vibrational spectroscopy (NRVS)

Nitrogenase catalyzes a reaction critical for life, the reduction of N(2) to 2NH(3), yet we still know relatively little about its catalytic mechanism. We have used the synchrotron technique of (57)Fe nuclear resonance vibrational spectroscopy (NRVS) to study the dynamics of the Fe-S clusters in this enzyme. The catalytic site FeMo-cofactor exhibits a strong signal near 190 cm(-)(1), where conventional Fe-S clusters have weak NRVS. This intensity is ascribed to cluster breathing modes whose frequency is raised by an interstitial atom. A variety of Fe-S stretching modes are also observed between 250 and 400 cm(-)(1). This work is the first spectroscopic information about the vibrational modes of the intact nitrogenase FeMo-cofactor and P-cluster.     

Quantitative analysis and characterization of biofunctionalized fluorescent silica particles

A strategy for the production and subsequent characterization of biofunctionalized silica particles is presented. The particles were engineered to produce a bifunctional material capable of both (a) the attachment of fluorescent dyes for particle encoding and (b) the sequential modification of the surface of the particles to couple oligonucleotide probes. A combination of microscopic and analytical methods is implemented to demonstrate that modification of the particles with 3-aminopropyl trimethoxysilane results in an even distribution of amine groups across the particle surface. Evidence is provided to indicate that there are negligible interactions between the bound fluorescent dyes and the attached biomolecules. A unique approach was adopted to provide direct quantification of the oligonucleotide probe loading on the particle surface through X-ray photoelectron spectroscopy, a technique which may have a major impact for current researchers and users of bead-based technologies. A simple hybridization assay showing high sequence specificity is included to demonstrate the applicability of these particles to DNA screening.     

Ethylene oligomerisation and polymerisation with nickel phosphanylenolates bearing electron-withdrawing substituents: Structure-reactivity relationships

Three SHOP-type catalysts, in which the C=C(O) double bond was substituted by electron-withdrawing substituents, [Ni{Ph2PC(R1)=C(R2)O}Ph(PPh3)] (2: R1,R2 = -C(Me)=NN(Ph)-; 3: R1 = CO2Et, R2 = Ph; 4: R1 = CO2Et, R2 = CF3), were assessed as ethylene-oligomerisation and -polymerisation catalysts and compared to Keim's complex, [Ni{Ph2PCH=C(Ph)O}Ph(PPh3)] (1). A rationale for the influence of the double-bond substituents of the P,O-chelate unit on the catalytic properties is proposed, on the basis of X-ray diffraction studies, spectroscopic data and DFT-B3 LYP calculations. Whatever their relative electron-withdrawing strength, the R1 and R2 substituents induce an increase in activity with respect to catalyst 1. For those systems in which the basicity of the oxygen atom is decreased relative to that of the phosphorus atom, the chain-propagation rate increases with respect to that for catalyst 1. Reduction of the basicity of the P relative to that of the O, however, induces higher chain-termination rates.     

International Intercomparison of Solar UVR Spectral Measurement Systems in Melbourne in 2013

Monitoring ambient solar UVR levels provides information on how much there is in both real time and historically. Quality assurance of ambient measurements of solar UVR is critical to ensuring accuracy and stability and this can be achieved by regular intercomparisons of spectral measurement systems with those of other organizations. In October and November of 2013 a solar UVR spectroradiometer from Public Health England (PHE) was brought to Melbourne for a campaign of intercomparisons with a new Bentham spectrometer of Australian Radiation Protection and Nuclear Safety Agency (ARPANSA) and one at the Australian Bureau of Meteorology (BOM), supported by New Zealand's National Institute for Water and Atmosphere (NIWA). Given all three spectroradiometers have calibrations that are traceable to various national standards, the intercomparison provides a chance to determine measurement uncertainties and traceability that support UV measurement networks in Australia, New Zealand and the UK. UV Index measurements from all three systems were compared and ratios determined for clear sky conditions when the scans from each instrument were within 2 min of each other. While wavelengths below 305 nm showed substantial differences between the PHE unit and the two other systems, overall the intercomparison results were encouraging, with mean differences in measured UV Index between the BOM/NIWA and those of PHE and ARPANSA of <0.1% and 7.5%, respectively.     

A Lead‐Selective Membrane Electrode Based Upon a Phosphorylated Hexahomotrioxacalix[3]Arene

Solvent extraction of a mixture of Pb^II, Mn^II, Fe^III, Co^II, Ni^II and Cd^II in aqueous perchlorate medium by a phosphorylated hexahomotrioxacalix[3]arene (calix‐3) in dichloromethane shows a significant selectivity towards lead ions. The ligand can also be incorporated into a membrane to provide a new lead ion‐selective electrode (Pb^II‐ISE). A plasticized PVC membrane containing 30% PVC, 53.5% ortho‐nitrophenyloctylether (NPOE), 4.5% sodium tetraphenylborate (NaTPB) and 12% ionophore was directly coated on a graphite rod. This sensor gave a good Nernstian response of 29.7 ± 0.7 mV decade^?1 over a concentration range of 1 × 10^?8 – 1 × 10^?4 M of lead ions, independent of pH in the range 3‐7, with a detection limit of 0.4 × 10^?8 M. The dynamic response time of the electrode to achieve a steady potential was very fast and found to be less than 7 s. The selectivity relative to Ag⁺, NH₄⁺, Li⁺, Na⁺, K⁺, Ca²⁺, Sr²⁺, Ba²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Fe³⁺, La³⁺, Sm³⁺, Dy³⁺, Er³⁺, Y³⁺ and Th⁴⁺ was examined. The electrode exhibits adequate stability with good reproducibility (with a slope of 29.6 ± 1.5 mV for 8 weeks). The characteristics of the sensor are compared with those of a tetraphosphorylated calix[4]arene (calix‐4) based Pb^II‐ISE, reported recently. The electrode was successfully used as an indicator electrode for a potentiometric titration of a lead solution using a standard solution of EDTA. The applicability of the sensor for lead ion measurements in various synthetic samples was also investigated.     

Cyclodextrin Solubilization of the Antibacterial Agents Triclosan and Triclocarban: Effect of Ionization and Polymers

The natural β-cyclodextrin (βCD) and its complexes have limited solubility in aqueous solutions. This low aqueous solubility, as well as low aqueous solubility of the guest molecule (i.e. triclosan or triclocarban (TCC)), can result in low complexation efficiency (CE). The purpose of this study was to enhance the apparent intrinsic solubility (S ₀) of the guest molecule and its βCD complexes through ionization and addition of auxiliary compounds such as polymers, amino acids and metal ions. Both triclosan (pK _a 7.9) and TCC (pK _a 12.7) are weak acids. Addition of ethanol to the complexation medium enhanced S ₀ of both triclosan and TCC but at the same time ethanol lowered the stability constant (K _c ) of their βCD complexes resulting in overall lowering of CE. Addition of small amount of water-soluble polymers enhanced the βCD solubilization of both guests, and addition lysine enhanced the solubilization of TCC. Ionization of triclosan resulted in significant enhancement of CE and enhanced triclosan release from tablets containing triclosan/βCD complex. The effect of ionization was not as pronounced in the case of TCC.This revised version was published online in July 2005 with a corrected issue number.     

Crystalline phase of Y_2O_3 :Eu particles generated in a substrate-free flame process

In this study, factors affecting the crystal structure of flame-synthesized Y 2 O 3 :Eu particles were inves- tigated, especially the particle size effect and its interaction with Eu doping concentration. Polydisperse Y 2 O 3 :Eu (size range 200 nm to 3 m) powder samples with Eu doping concentrations from 2.5 mol% to 25 mol% were generated in either H 2 /air or H 2 /O 2 substrate-free flames. The crystal structure of the powder samples was determined by powder X-ray diffraction (XRD), which was complemented...     

Riemannian geometry of irrotational vortex acoustics

We consider acoustic propagation in an irrotational vortex, using the technical machinery of differential geometry to investigate the "acoustic geometry" that is probed by the sound waves. The acoustic space-time curvature of a constant circulation hydrodynamical vortex leads to deflection of phonons at appreciable distances from the vortex core. The scattering angle for phonon rays is shown to be quadratic in the small quantity Gamma/2pi(cb), where Gamma is the vortex circulation, c the speed of sound, and b the impact parameter.