Gas chromatographic/mass spectrometric determination of benzene and its alkyl derivatives in indoor and outdoor air in Fuji, Japan

An analytical method was established for the determination of benzene and 13 of its alkyl derivatives. The method was applied to a survey of indoor pollution that investigated the usefulness of the method, concentration levels, seasonal variations, profiles, correlations between compounds, and factors that affected indoor pollution by these compounds. The survey was performed in 21 houses in the summer of 1999 and 20 houses in the winter of 1999-2000 in Fuji, Japan. All the target compounds were detected in the indoor and outdoor air of all houses. Outdoor concentrations of benzene ranged from 0.779 to 3.17 microg/m3 in summer and from 1.35 to 6.04 microg/m3 in winter, whereas indoor concentrations of benzene ranged from 0.694 to 3.11 microg/m3 in summer and from 1.65 to 6.89 microg/m3 in winter. Indoor concentrations of the target compounds, except for benzene, were elevated, compared with outdoor concentrations. Because indoor and outdoor concentrations of benzene and its derivatives in summer were lower than in winter, the emission of these compounds may be increased by use of a heater and other variables present in winter. Profiles of the compounds, correlations between the compounds, and factors that affected indoor pollution (determined by multiple regression analysis) were investigated. These results suggested that indoor benzene predominantly penetrated from outdoors and that other benzene derivatives were emitted from indoor sources, such as paint solvents and kerosene heaters.     

Structure and physical properties of 1D magnetic chalcogenide, jamesonite (FePb4Sb6S14)

Monoclinic FePb(4)Sb(6)S(14) phase, jamesonite, which is a candidate material as a S = 2 Haldane compound, has been synthesized by the direct reaction of elements under dry conditions with sealed evacuated quartz tubes. The congruent melting point was determined at 592 degrees C by DTA measurements. Shiny metallic gray needle crystals grow on the surface of bulk heated at 550 degrees C. The elongated direction of each needle crystal is parallel to the c-axis. The crystal structure refinement (P2(1)/a, a = 15.750(6) A, b = 19.125(3) A, c = 4.030(4) A, beta = 91.68(8) degrees, V = 1213(1) A(3), Z = 2, D(c) = 5.651 g/cm(3), R(1) = 3.16%) reveals the presence of two rod substructures elongated parallel to the c-axis. One is the lozenge-shaped Bi(2)Te(3)-type (or called SnS archetype), [Pb(4)Sb(6)S(13)]. The other is the novel single magnetic one-dimensional (1D) straight chain, [FeS(6)]. This compound shows intrinsic semiconductor behavior in the electric conductivity measurements. The optical band gap, 0.48 eV, is estimated by near-IR diffuse reflectance measurements. In the magnetic susceptibility measurements, this compound shows 1D-Heisenberg antiferromagnetic behavior with a broad peak at approximately 33.5 K, where Fe(2+) takes the high-spin state, t(2g)(4)e(g)(2). A possibility for the S = 2 Haldane system is discussed.     

Fuzzy adaptive least squares and its use in quantitative structure-activity relationships

Fuzzy adaptive least squares (FALS), a pattern recognition method designed to correlate molecular structure with activity rating, has been developed. A novel feature of FALS is that the degree to which each sample belongs to an activity class is given using a membership function. The algorithm involves an iterative modification of forcing factors to maximize the sum of the membership function values over all samples. This paper first describes the method and calculation procedure of FALS89 (1989 version of FALS), and then shows its application to the correlation of structure with a potency rating of anticarcinogenic mitomycin derivatives and arginine-vasopressin antagonists. FALS89 applied to these samples showed considerably high reliability in both recognition and leave-one-out prediction.     

Application of X-ray fluorescence holography to the analysis of the interior and surface of an yttrium oxide thin film

We report on the characterization of a thin film of yttrium oxide by X-ray fluorescence holography. The sample has a layered structure with an YO base layer and an oxidized Y₂O₃ surface. Both layers are clearly observed in the atomic image reconstructions, and their local structure is analyzed. We show that by using incident energies close to the absorption edge of the fluorescing atom, it becomes possible to observe the thin surface layer clearly, even next to a base layer containing the same fluorescing element.     

Reaction of α,β‐unsaturated ketones with cerium(IV) salts in alcohol

Reaction of α,β‐unsaturated ketones with cerium(IV) salts or lanthanide triflates in alcohols gave good yields of the corresponding β‐alkoxy compounds. In the case of 2‐cyclopentenone and 2‐cyclohexenone, the 1,1,3‐trialkoxy acetal derivatives were obtained preferentially accompanied by β‐alkoxyketone, except 2‐cycloheptenone. However, in the reaction of 2‐cycloheptenone with alcohol using cerium(IV) sulfate (CS)‐molecular sieve, 1,1,3‐trialkoxy derivatives were obtained. Also, in the cases of 1‐penten‐3‐one, 4‐hexen‐3‐one and 3‐hepten‐2‐one, 1,1,3‐trialkoxy derivatives were obtained preferentially. Copyright © 2006 John Wiley & Sons, Ltd.     

In Vitro Thermal and Ethanol Adaptations to Improve Vinegar Fermentation at High Temperature of Komagataeibacter oboediens MSKU 3

Applied Biochemistry and Biotechnology - High temperature and high ethanol concentrations obviously affect vinegar fermentation. The thermotolerant and ethanol-resistant strains are expected to...     

Structural isomer effects on the morphology of block copolymer/metal salts hybrids

The structural isomer effects on phase behavior of block copolymer/FeCl₃ hybrids were investigated by comparing structures of two series of blends based on polystyrene‐b‐poly(4‐vinylpyridine) (PS‐P4VP) and polystyrene‐b‐poly(2‐vinylpyridine) (PS‐P2VP), with the same molecular weight and the same composition. By conbining fourier transform infrared (FT‐IR) spectroscopy and differencial scaninng calorimetry, successful achievements of selective dispersion of FeCl₃ into poly(vinylpyridine) phase via coordination were verified. Complementary morphological observation by transmission electron microscopy and small‐angle X‐ray scattering (SAXS), it has been clarified that phase behavior for two isomer series is considerably different. That is, neat PS‐P4VP formed thicker cylindrical domains than that of neat PS‐P2VP due to much stronger Flory‐Huggins interaction parameter χ, χ_PS‐P4VP » χ_PS‐P2VP. As for PS‐P2VP/FeCl₃ hybrids, morphological transition can be taken place at the smaller amount of metal salt; furthermore, P2VP blend series form lamellar structures with evidently larger periodic length at the same amount of metal salt. This is probably caused by the event that excess metal salt also contributes to lamellar expansion by localizing at the center of P2VP lamellar phase. Moreover, the saturation limit of introduced metal salt in P2VP was smaller than that in P4VP due to the steric hindrance for a lone pair electrons on nitrogen atoms directed to the main chain of P2VP. These results can be explained by the structural isomer effects on the conformation of the P2VP chains at coordinated state with FeCl₃, that is, P2VP chains prefer to form the intramolecular coordination due to the short range interaction so as to make themselves stiffer, whereas P4VP chains tend to adopt the long range interaction including intra‐ and intermolecular coordinations. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 377–386     

Dissociation of core-valence doubly excited states in NO followed by atomic Auger decay

The decay processes of core-valence doubly excited states near the N K edge of NO have been studied using electron spectroscopy. Electron yields measured as a function of photon energy and kinetic energy enable the clear identification of atomic Auger lines associated with the dissociation of doubly excited states. The atomic Auger lines exhibit Doppler profiles, allowing the entire reaction scheme of such dissociation processes to be determined.