Stress development during drying of calcium carbonate suspensions containing carboxymethylcellulose and latex particles

Stress development during drying of coatings produced from aqueous dispersions of calcium carbonate particles in the presence and absence of organic binders was studied using a controlled-environment stress apparatus that simultaneously monitored drying stress, weight loss, and relative humidity. Specifically, the influence of two organic binders on drying stress evolution was investigated: (1) carboxymethylcellulose, a water-soluble viscosifying aid, and (2) a styrene-butadiene latex emulsion of varying glass transition temperature. The stress histories exhibited three distinct regions. First, a period of stress rise was observed, which reflected the capillary tension exerted by the liquid on the particle network. Second, a maximum stress was observed. Third, it was followed by a period of either stress decay or rise depending on the organic species present. Significant differences in stress histories were observed between coatings containing soluble and nonsoluble binders. Maximum drying stresses (sigmamax) of 0.2-0.5 MPa were observed for coatings produced from pure calcium carbonate or calcium carbonate-latex suspensions, whereas coatings with carboxymethylcellulose exhibited substantially higher sigmamax values of 1-2 MPa. Upon drying, these coatings were quite hygroscopic, such that cyclic variations in relative humidity induced large cyclic changes in residual stress.     

An alternative efficient redox couple for the dye-sensitized solar cell system

A series of new cobalt complexes [Co(LLL)(2)X(2)] were synthesized and evaluated as redox mediators for dye-sensitized nanocrystalline TiO(2) solar cells. The structure of the ligand and the nature of the counterions were found to influence the photovoltaic performance. The one-electron-transfer redox mediator [Co(dbbip)(2)](ClO(4))(2) (dbbip = 2,6-bis(1'-butylbenzimidazol-2'-yl)pyridine) performed best among the compounds investigated. Photovoltaic cells incorporating this redox mediator yielded incident photon-to-current conversion efficiencies (IPCE) of up to 80%. The overall yield of light-to-electric power conversion reached 8 % under simulated AM1.5 sunlight at 100 W m(-2) intensity and more than 4% at 1000 W m(-2). Photoelectrodes coated with a 2 microm thick nanoporous layer and a 4 microm thick light-scattering layer, sensitized with a hydrophobic ruthenium dye, gave the best results.     

Zur reaktionsweise von triafulvenen mit azomethinyliden

The reaction of the azomethine ylides 2a–c with cyclopropenones 3 and of 2a with methylene cyclopropenes 7 leads via (3+3)-cycloaddition to pyridones-4 5 and 1,4 - dihydro - N - methyl - 4 - methylene - pyridines 8, respectively. The merocyanine systems 8 exhibit marked solvatochromic and thermochromic properties.     

The photoreactions of recombinant phytochrome from the cyanobacterium Synechocystis: a low-temperature UV-Vis and FT-IR spectroscopic study

The interconvertible photoreactions of recombinant phytochrome from Synechocystis reconstituted with phycocyanobilin were investigated by light-induced optical and Fourier-transform infrared (FT-IR) difference spectroscopy at low temperatures for the first time. The photochemistry was found to be deferred below -100 degrees C for the transformation of red-absorbing form of phytochrome (Pr)-->far-red-absorbing form of phytochrome (Pfr), and no formation of an intermediate similar to the photoproduct of phytochrome A obtained at -140 degrees C (lumi-R) was observed. Two intermediates could be stabilized below -40 degrees C and between -40 and -20 degrees C, and were denoted as meta-Ra and meta-Rc, respectively. Above -20 degrees C Pfr was obtained. In the reverse reaction two intermediates could be stabilized below -60 degrees C (lumi-F) and between -60 and -40 degrees C (meta-F). The FT-IR difference spectra of the late Pr-->Pfr photoreaction show great similarities to the spectra obtained from oat phytochrome A suggesting similar conformation of the chromophore and interactions with its protein environment, whereas deviations in the spectra of meta-Ra were observed. A large band around 1700 cm-1 in the difference spectra between the intermediates and Pr which is tentatively assigned to the C19=O group of the prosthetic group indicates the Z,E isomerization around the C15=C16-methine bridge of the chromophore during the formation of meta-Ra. In the difference spectra of the parent states only small differences are observed in this region suggesting that the frequency of the carbonyl group is similar in Pr and Pfr. Since the FT-IR difference spectra between lumi-F and Pfr show great similarities to the spectra of the parent states, it is assumed that during the formation of lumi-F the chromophore largely returns into the primary Pr conformation. The FT-IR spectra recorded in a medium of 2H2O generally show a downshift of the significant bands due to the isotope effect. The appearance of a characteristic band around 935 cm-1 in all 2H2O spectra suggests an assignment to an N-2H bending vibration of the chromophore.     

Transition metal nitrosyls as nitrosylation agents : II.Photo-nitrosylation of η5-C5H5V(CO)3L(L = CO,Pz3) by [Co(NO)2Br]2

η⁵-C₅H₅V(NO)₂CO is prepared in 40% yield by the photo-reaction between η⁵-C₅H₅V(CO)₄ and [Co(NO)₂Br]₂.η⁵-C₅H₅V(NO)₂CO reacts by an S_N1 mechanism with various phosphines PZ₃ to yield η⁵-C₅-H₅V(NO)₂PZ₃. The phosphine complexes are also obtained by photo-induced ligand interchange between η⁵-C₅H₅V(CO)₃PZ₃ and [Co(NO)₂Br]₂, or η⁵-C₅H₅V(CO)₄ and Co(NO)₂Br(PZ₃). In all cases, the main cobalt species formed is Co(NO)(CO)₃. While the one-bond vanadiumphosphorus coupling constants of most of the phosphine complexes are virtually the same (ca 410 Hz),the chemical shift values δ(⁵¹V) (?1328 to ?973 ppm rel. VOCl₃) decrease in the order PF₃ > CO > P(OR)₃ > P(alkyl)₃ > PPh₃ > PPh(NEt₂)₂, reflecting the decreasing π-acceptor ability of the ligands. δ(⁵¹V) also decreases in the series of alkylphosphines PR₃ (R = Me, Et, Prⁿ, Buⁱ, Prⁱ, BU^t) as the cone angle of PR₃increases.     

Luminescent organoboron quinolate polymers

The synthesis of well-defined luminescent organoboron polymers via a novel three-step procedure starting from silylated polystyrene is reported. Highly selective borylation of poly(4-trimethylsilylstyrene) (PS-Si), followed by replacement of the bromine substituents in poly(4-dibromoborylstyrene) (PS-BBr) with substituted thienyl groups (R = H, 3-hexyl, 5-hexyl), and final introduction of the 8-hydroxyquinolato moiety yields a series of new organoboron quinolate polymers in 67-83% isolated yield. The hexyl-substituted polymers are highly soluble and solution-processable yielding thin films that efficiently emit light at 513-514 nm upon excitation at 395 nm.     

Intercalation of 1,2-Alkanediols into α-Zirconium Hydrogenphosphate

Intercalation compounds of α-Zr(HPO₄)₂ · H₂O with 1,2-alkanediols (from C3 to C16) have been prepared by replacing 1-propanol in α-Zr(HPO₄)₂ · 2C₃H₇OH with the desired 1,2-alkanediols by a treatment in a microwave field. It was found that the intercalates contain 1.5 molecules of diol per formula unit. The diol molecules are placed between the host layers in a bimolecular way with their aliphatic chains tilted at an angle of 51°. The diol molecules are anchored in the interlayer space by H-bonds. A mixed intercalate, containing 1,2-butanediol and 1,2-decanediol in a roughly equimolar ratio, is formed when the α-Zr(HPO₄)₂ · 2C₃H₇OH intercalate, suspended in a mixture of 1,2-butanediol and 1,2-decanediol, is exposed to microwave radiation. No new phase containing both types of the guest molecules was observed when the 1-propanol intercalate, suspended in a mixture of 1-propanol and 1,2-octanediol, is exposed to microwave radiation.     

Verflüchtigung von Spaltproduktjod aus Festem UCl4

It is possible to volatilize about 95% (at temperatures between 200°C and 600°C) of the iodine, which has been produced by irradiating solid UCl₄ with thermal neutrons. The delay times for iodine are decreasing from 2 hrs (at 200°C) to 7 sec (at 600°C). The release of the iodine is improved by using an inert carrier gas. When adding AgCl to the UCl₄ before irradiation is carried out, the release of iodine is suppressed at temperatures lower than 400°C. The adding of KI leads to a more rapid release of iodine at low temperatures.      

Vibrational and lifetime line broadenings in ESCA

The line profile of the narrow, symmetric 1s line from neon, recorded with the new ESCA instrument with X-ray monochromatization, is analyzed. The natural linewidth of this line is found to be 0.23 ± 0.02 eV, in good agreement with theoretical calculations of the oscillator strengths for Auger transitions and X-ray emission. Spectra from molecules show frequently asymmetric core electron lines under high resolution. This rules out previous explanations based on a chemical influence on the natural lifetime. Contrary to earlier assumptions, vibrational excitations are shown to be important in core electron spectra. For methane, the vibrational energy spacing is large enough to allow the vibrational lines to be partly resolved. Recent results from accurate PNO CI calculations on methane agree well with the experimental findings. The Franck-Condon transitions in the C1s and N1s lines from CO and N₂ are shown to be well described in the harmonic approximation and approximating the potential curves of the highly excited core hole states with the potential curve for the ground state of NO⁺, X¹ Σ⁺. Knowledge of vibrational excitations in core electron spectra is shown to be valuable in the analysis of high resolution X-ray emission spectra of free molecules.     

The ion product of H2O,dissociation constants of H2CO3 and pitzer parameters in the system Na+/H+/OH−/HCO 3 − /CO 3 2- /ClO 4 − /H2O at 25°C

The ion product of water and the dissociation constants of carbonic acid have been determined in 0.1, 1.0, 3.0, and 5.0M NaClO₄ at 25°C. The ion product of water K _w ^' has been evaluated by emf measurements with a combined glass electrode in NaClO₄ solutions containing 0.001–0.1M HCLO₄ or NaOH. The product K _H ^' K _l ^' K ₂ ^' of the Henry constant for CO₂ and the dissociation constants for H₂CO₃ have been determined by titration of carbonate solutions equilibrated with pCO₂ =10^–3.52 atm, and K ₂ ^' has been evaluated by potentiometric titration and by measuring the H⁺ concentration at fixed HCO ₃ ^– and CO ₃ ^2- concentrations. The ion interaction (Pitzer) equations are applied to describe the constants K _w ^' , K ₂ ^' and K _H ^' H ₁ ^' K ₂ ^' as a function of the NaClO₄ concentration. The experimental data are used to evaluate the mixing parameters _{i/ClO 4} and _{i/ClO 4} ^-/Na⁺ fori = OH ^-,HCO ₃ ^- andCO ₃ ^2-