A novel covalent functionalisation of poly (styrene-alt-maleic anhydride) with 4-amino benzo-9-crown-3 ether

The grafting of 4-amino benzo-9-crown-3 ether to poly (styrene-alt-maleic anhydride) has been described. The covalent grafting of crown ether has led to a considerable increase in the solubility of polymer in organic solvents such as dimethyl sulphoxide, dimethylformamide and tetrahydrofuran. The highest solubility was attained in DMF and DMSO. The covalently bonded 4-benzo-9-crown-3 ether allowed the hosting of Li⁺. The covalently grafted crown ether to polymer was identified by infrared spectroscopy and thermogravimetric analysis methods.     

Synthesis of Alkyl (5-Oxo-2-thioxo-[1,3,4]thiadiazinan-6-ylidene)acetates by the Reaction of N-Aminorhodanine,Dialkyl Acetylenedicarboxylates,and Triphenylphosphine

Protonation of the reactive zwitterionic intermediate produced from the reaction between triphenylphosphine and dialkyl acetylenedicarboxylates by N-aminorhodanine followed by the addition of the conjugate anion of N-aminorhodanine on the produced vinylphosphonium cation leads to alkyl (5-oxo-2-thioxo-[1,3,4]thiadiazinan-6-ylidene)acetates in good yields.     

Modified dispersive liquid-liquid microextraction for pre-concentration of benzene, toluene, ethylbenzene and xylenes prior to their determination by GC

We have developed a modified method for the extraction and preconcentration of benzene, toluene, ethylbenzene and xylenes (BTEX) in aqueous samples. It based on dispersive liquid-liquid microextraction along with solidification of floating organic microdrops. The dispersion of microvolumes of an extracting solvent into the aqueous occurs without dispersive solvent. Various parameters have been optimized. BTEX were quantified via GC with FID detection. Under optimized conditions, the preconcentration factors range from 301 to 514, extraction efficiencies from 60 to 103 %, repeatabilities from 2.2 to 4.1 %, and intermediate precisions from 3.5 to 7.0 %. The relative recovery for each analyte in water samples at three spiking levels is >85.6 %, with a relative standard deviation of <7.4 %.

Diammonium Hydrogen Phosphate: An Efficient and Versatile Catalyst for the One‐Pot Synthesis of Tetrahydrobenzo[b]pyran Derivatives in Aqueous Media

Diammonium hydrogen phosphate was used as a mild, efficient, neutral, and cheap catalyst for the synthesis of various 4H‐benzo[b]pyran derivatives via a one‐pot, three‐component condensation of aromatic aldehydes, active methylene compounds, and dimedone in aqueous media.     

Determination of organochlorine pesticides in river water using dispersive liquid–liquid microextraction and gas chromatography–electron capture detection

Dispersive liquid–liquid microextraction (DLLME) coupled with gas chromatography–electron capture detection (GC–ECD), has been developed for the extraction and determination of 14 organochlorine pesticides (hexachlorocyclohexanes (α-HCH, β-HCH and δ-HCH), Lindane (γ-HCH), Aldrin, Dieldrin, Endrin, Heptachlor, Heptachlor epoxide, α-Chlordane, β-Chlordane and p,p′-DDT, p,p′-DDD, p,p′-DDE) in river water samples. Factors relevant to the microextraction efficiency, such as the kind of extraction and disperser solvent, their volume and the salt effect was investigated and optimised. In this method the appropriate mixture of extraction solvent (13.5 µL carbon disulphide) and disperser solvent (0.50 mL acetone) were rapidly injected into the aqueous sample by syringe. The values of the detection limit of the method were in the range of 0.05–0.001 µg L^?1, while the relative standard deviations for five replicates varied from 2.7 to 9.3%. A good linearity (0.9894 ≤ r ² ≤ 0.9998) and a broad linear range (0.01–200 µg L^?1) were obtained. The method exhibited enrichment factors ranging from 647 to 923, at room temperature. The relative standard deviations varied from 2.7 to 9.3% (n = 5). The relative recoveries of each pesticide from water samples at spiking levels of 2.00 and 10.0 µg L^?1 were 88.0–111.0% and 95.8–104.1%, respectively. Finally, the proposed method was successfully utilised for the preconcentration and determination of the organochlorine pesticides in the Jajrood River water samples.     

Evaluation of the corrosion inhibition effect of micro/nanocapsulated polymeric coatings: a comparative study by use of EIS and Tafel experiments and the area under the Bode plot

In this paper we propose an approach for ranking self-healing polymeric coatings containing micro/nanocapsules in order of corrosion-protection effectiveness on exposure to 3.5 % (w/w) NaCl solution. The results indicated that development of electrochemical cells was inhibited by the active components of the ruptured embedded inhibitor micro/nanocapsules which were released into a scratch inflicted in the polymeric coating on steel surface. Undamaged surface film of test and control specimens exposed to the solution had excellent corrosion-inhibition performance, as reflected by results from both electrochemical impedance spectroscopy and polarization tests. Moreover, three coatings containing capsules synthesized at three different agitation rates with the same thickness were compared to determine the optimum rate. For the optimum rate the optimum thickness was then determined. The areas under Bode plots were determined and used as useful values for evaluation and ranking the coatings. It was found that the area under the Bode plot is a good criterion for evaluating polymeric coating degradation during immersion. There was good agreement between the results of this work and those from electrochemical tests.     

Iranian chemist’s efforts to provide various effective methods for the synthesis of xanthenes

Xanthenes and their derivatives as very important classes of organic compounds are key structural elements of many biologically active compounds. These materials are important heterocyclic nucleus of various dyes and drugs. Because of their wide range of pharmacological, industrial and synthetic applications, many methods for the preparation of xanthenes are reported in the literature. In recent years, among the other chemists, introduction of new methods for the preparation of these types of compounds has attracted the attention of Iranian chemists. The result of these efforts is the introduction of appropriate, effective and efficient methods. In this paper, we have a brief review on these methods and their main advantages and important applicabilities.     

Analysis of tamoxifen and its main metabolites in plasma samples of breast cancer survivor female athletes: Multivariate and chemometric optimization

A sensitive method based on liquid chromatography combined with a diode array detector was developed and validated to simultaneously determine tamoxifen, and its active metabolites N-desmethyltamoxifen, 4-hydroxytamoxifen, and endoxifen in human plasma samples. The green and sustainable vortex-assisted dispersive liquid-phase microextraction technique based on the natural hydrophobic deep eutectic solvent was used for the extraction and preconcentration of the analytes. Chemometrics and multivariate analysis were used to optimize the independent variables including the type and volume of deep eutectic solvent, extraction time, and ionic strength. Under optimal conditions, calibration curves were linear in a suitable range with the lower limits of quantification (0.8–10.0 μg/L), which covered the relevant concentrations of the analytes in plasma samples for a clinical study. Intra- and interday precision evaluated at three concentrations for the analytes were lower than 8.2 and 12.1%, respectively. Accuracy was in the range of 94.9–104.7%. The applicability of the developed method on human plasma samples illustrated the range 45.1–72.8, 98.4–128.3, 0.9–1.2, and 2.7–6.1 μg/L for tamoxifen, N-desmethyltamoxifen, 4-hydroxytamoxifen, and endoxifen, respectively. The validated method can be effective for the pharmacokinetics, pharmacodynamics, and therapeutic drug monitoring studies of tamoxifen and its main metabolites in biological fluids.     

Synthesis of Fe3O4-supported Schiff base Cu (II) complex: a novel efficient and recyclable magnetic nanocatalyst for one-pot three-component synthesis of quinolin-5-one,chromene-3-carbonitrile and phthalazine-5,10-dione derivatives

Research on Chemical Intermediates - In this research, synthesis and characterization of a novel Schiff base Cu (II) complex immobilized on Fe3O4@SiO2 nanoparticles are reported. Then, the...     

Crystal and Molecular Structures of Mononuclear Coordinated Copper(I) Complexes with Thio-triazole and Thio-triazine based Schiff base Ligands

Reaction of 4-amino-5-methyl-1,2,4-triazol-3(2H)-thione (AMTT) and 4-amino-6-methyl-3-thio-3,4-dihydro-1,2,4-triazin-5(2H)-one (AMTTO) with 2-hydroxybenzaldehyde led to the synthesis of corresponding Schiff base ligands [(Z)-4-((2-hydroxybenzylidene)amino)-3-methyl-1H-1,2,4-triazole-5(4H)-thione ( L1 ) and (Z)-4-((2-hydroxybenzylidene)amino)-6-methyl-3-thioxo-3,4-dihydro-1,2,4-triazin-5(2H)-one ( L2 )]. Treatment of synthesized Schiff base ligands with CuCl provided the complexes [Cu(L1)₃Cl] ( 1 ) and [Cu(L2)₂Cl] ( 2 ). Synthesized complexes were characterized by elemental analyses, IR spectroscopy and X-ray diffraction studies. Complex 1 consists of a metal ion coordinated with one chloride ion and three Schiff base ligands via sulfur atoms in a distorted tetrahedral environment, whereas 2 consists of a metal ion coordinated with one chloride ion and two sulfur atoms from two different Schiff base ligands in a trigonal planar arrangement. Crystal data for 1 at –153 °C revealed an orthorhombic space group Fdd2, a = 34.8088(7), b = 33.8156(8), c = 11.6142(2) Å, Z = 16, R₁ = 0.0357; for 2 at –178 °C the symmetry was triclinic, space group P1 , a = 7.27520(10), b = 15.4620(2), c = 23.7985(4) Å, α = 72.1964(13), β = 86.5208(12), γ = 89.8597(11)°, Z = 4, R₁ = 0.0359.