Analysis of antitumor active OSW-1 and its analogues by liquid chromatography coupled with electrospray and atmospheric pressure chemical ionization quadrupole mass spectrometry

Three cholestane glycosides including OSW-1 with antitumor activity and two new analogues with modified steroidal side chains, thienyl OSW-1 and silylated thienyl OSW-1, were synthesized. Analyses were performed using optimized, reversed-phase liquid chromatography (LC) with electrospray ionization and atmospheric pressure chemical ionization quadrupole mass spectrometry (MS). The ionization mode and polarity, cone voltage, and chromatographic conditions were evaluated. The optimum LC/MS conditions to obtain valuable ions, indispensable for identifying the structures, are described. The key fragmentation pathways, which will be useful for confirming the detailed structures of steroidal glycosides, are also proposed.     

Revisiting the morphology development of solvent-swollen composite polymer particles at thermodynamic equilibrium

Morphology of polystyrene (PS)/poly(methyl methacrylate) (PMMA)/toluene droplets, in which phase separation proceeds, dispersed in SDS aqueous solution was examined. It changed from ex-centered PS-core/PMMA-shell to hemisphere with increasing SDS concentration. At low polymer weight fraction (wp), PS and PMMA phases contained non-negligible amount of PMMA and PS, respectively. The small amount of PS and PMMA in PMMA and PS phases, respectively, affected significantly the interfacial tension between polymer/toluene and aqueous solutions. Interfacial tension between PS and PMMA phases at low wp was measured by the spinning drop method, showing a quite low value ( approximately 10-2 mN/m). Predicted morphology obtained from calculation of minimum total interfacial free energy of the droplets using the interfacial tensions agreed well with the experimental observation.     

Preparation of multihollow polymer particles by seeded emulsion polymerization using seed particles with incorporated nonionic emulsifier

Emulsion polymerizations of styrene using poly(oxyethylene) nonylphenyl ether nonionic emulsifier were carried out at different emulsifier and initiator (potassium persulfate, KPS) concentrations to prepare polystyrene (PS) seed particles with incorporated nonionic emulsifier. Seeded emulsion polymerizations of styrene using the PS seed particles with different amounts of incorporated emulsifier were carried out to develop a novel method for the preparation of multihollow particles. When seed particles with a small amount of incorporated emulsifier were used, non-hollow spherical particles were prepared. However, multihollow particles were obtained in the case of seed particles with a large amount of incorporated emulsifier. Moreover, the higher the initiator concentration in the preparation of seed particles, the more effectively were hollow particles prepared. On the basis of the above results, a mechanism for the formation of multihollow structure was suggested.     

Excellent Redox Properties of Poly(thienylphenylamine)s

Triphenylamines with thienyl groups are electro‐oxidatively polymerized to yield the corresponding branched polymers on an electrode. The resulting polymers show significantly better redox properties, such as redox activity, catalytic activity, and conductivity when compared with for example the linear polymeric analog. The good properties of the branched polymers are based on the higher electronic conductivity (2–6 S/cm), since the branching provides multiple routes for charge carriers. The redox‐active polymers show high capacity (ca. 40 mC/cm²) and catalytic activity for the electron transfer of ferrocene on the electrode.     

Lamellar thickening in nascent poly(acrylonitrile) upon annealing

No systematic study has been reported on the lamellar thickening in atactic poly(acrylonitrile) (PAN) upon annealing because PAN, in the form of solution‐cast films or their drawn products, generally shows no small‐angle X‐ray scattering (SAXS) maximum corresponding to the lamellar thickness. In this work, PAN crystals were precipitated during the thermal polymerization of acrylonitrile in solution. The nascent PAN film, obtained by the filtration of the crystal suspension, exhibited a clear SAXS maximum revealing the lamellar structure. The lamellar thickening upon annealing of the nascent PAN films was studied in the temperature range 100–180 °C, where the degradation was minimal, as confirmed by the absence of an IR absorption band at 1605 cm⁻¹ ascribed to the cyclized nitrile groups. Above 190 °C, the degradation of the samples was significant, and the SAXS became too broad to determine the scattering maximum. The long period was significantly affected by the annealing time (t_a) and the temperature (T_a). Depending on t_a, three stages were observed for the lamellar thickening behavior. The lamellar thickness stayed constant in stage I (t_a = 0.5–3 min, depending on T_a), rapidly increased in stage II (t_a = 0.5–8 min), and stayed at a constant value characteristic for each T_a at yet longer t_a's in stage III. The lamellar thickness characteristic for T_a increased rapidly with increasing T_a at 165 °C (or higher), which was 152 °C lower than the estimated melting temperature of PAN (T_m = 317 °C). A possible mechanism for such lamellar thickening in PAN far below the T_m is discussed on the basis of the enhanced chain mobility in the crystalline phase above the crystal/crystal reversible transition at 165–170 °C detected by differential scanning calorimetry and wide‐angle X‐ray diffraction. The structural changes associated with annealing are also discussed. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2571–2579, 2000     

A novel redox system consisting of π-conjugated polymers and transition metals

Coordination of π-conjugated polymers to transition metals constructs a novel redox system due to interchangeable various oxidation states of the polymers, which permits transition metals to interact with each other through a π-conjugate chain. The redox characteristics were found to depend on the electronic interaction with metals and the doping. A combination of copper(II) or iron(III) chloride and polyanilines afforded the complex catalysts with the higher oxidation capability for dehydrogenative oxidation. A catalytic system was also realized in the transition-metal-induced oxidation reaction, in which π-conjugated polymers serve as redox-active ligands participating in the reversible redox cycle. The Wacker oxidation of terminal olefins proceeded catalytically in the presence of a catalytic amount of polyaniline or polypyrrole derivative under oxygen.     

Enhancement of electroluminescence intensity in poly(3-alkylthiophene) with different alkyl side-chain length by doping of fluorescent dye

Electroluminescent diodes utilizing poly(3-alkylthiophene) (PAT) containing fluorescent dyes have been fabricated and their unique enhancement of emission characteristics have been studied. Remarkable enhancement of the electroluminescence efficiency has been observed for diodes with PAT doped with oxadiazole derivative (2-(4-biphenylyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole; PBD) and perylene derivative (N,N′ - Bis(2,5 - di - tert - butylphenyl) - 3,4,9,10 - perylenedi- carboximide; BPPC). The mechanism of emission enhancement by doping of PBD into PAT has been discussed with different alkyl side-chain lengths. © 1997 John Wiley & Sons, Ltd.     

A protocol for searching the most probable phase‐retrieved maps in coherent X‐ray diffraction imaging by exploiting the relationship between convergence of the retrieved phase and success of calculation

Coherent X‐ray diffraction imaging (CXDI) is a technique for visualizing the structures of non‐crystalline particles with size in the submicrometer to micrometer range in material sciences and biology. In the structural analysis of CXDI, the electron density map of a specimen particle projected along the direction of the incident X‐rays can be reconstructed only from the diffraction pattern by using phase‐retrieval (PR) algorithms. However, in practice, the reconstruction, relying entirely on the computational procedure, sometimes fails because diffraction patterns miss the data in small‐angle regions owing to the beam stop and saturation of the detector pixels, and are modified by Poisson noise in X‐ray detection. To date, X‐ray free‐electron lasers have allowed us to collect a large number of diffraction patterns within a short period of time. Therefore, the reconstruction of correct electron density maps is the bottleneck for efficiently conducting structure analyses of non‐crystalline particles. To automatically address the correctness of retrieved electron density maps, a data analysis protocol to extract the most probable electron density maps from a set of maps retrieved from 1000 different random seeds for a single diffraction pattern is proposed. Through monitoring the variations of the phase values during PR calculations, the tendency for the PR calculations to succeed when the retrieved phase sets converged on a certain value was found. On the other hand, if the phase set was in persistent variation, the PR calculation tended to fail to yield the correct electron density map. To quantify this tendency, here a figure of merit for the variation of the phase values during PR calculation is introduced. In addition, a PR protocol to evaluate the similarity between a map of the highest figure of merit and other independently reconstructed maps is proposed. The protocol is implemented and practically examined in the structure analyses for diffraction patterns from aggregates of gold colloidal particles. Furthermore, the feasibility of the protocol in the structure analysis of organelles from biological cells is examined.