A pilot study on improving the absorptivity of a thick microperforated panel absorber

Microperforated panel (MPP) absorbers are promising as a basis for the next-generation of sound absorbing materials. MPPs are typically made of a thin metal or plastic panel. However, thin limp panels are generally not suitable as an interior finish of room walls because they do not have sufficient strength, which prevents practical application of MPPs as an interior finish of room walls. In order to overcome the lack of appropriate strength required for room walls, it is possible to make an MPP out of a thick panel. However, thick MPPs are usually not efficient because the resistance and/or reactance become too high. In this study, trial production of thick MPPs and measurement of their normal absorption coefficients were carried out. Results show that efficient absorption can be given with a thick MPP by using a tapered perforation.     

Development of Very-Low-Temperature Millimeter-Wave Electron-Spin-Resonance Measurement System

We report the development of a millimeter-wave electron-spin-resonance (ESR) measurement system at the University of Fukui using a ³He/⁴He dilution refrigerator to reach temperatures below 1 K. The system operates in the frequency range of 125–130 GHz, with a homodyne detection. A nuclear-magnetic-resonance (NMR) measurement system was also developed in this system as the extension for millimeter-wave ESR/NMR double magnetic-resonance (DoMR) experiments. Several types of Fabry–Pérot-type resonators (FPR) have been developed: A piezo actuator attached to an FPR enables an electric tuning of cavity frequency. A flat mirror of an FPR has been fabricated using a gold thin film aiming for DoMR. ESR signal was measured down to 0.09 K. Results of ESR measurements of an organic radical crystal and phosphorous-doped silicon are presented. The NMR signal from ¹H contained in the resonator is also detected successfully as a test for DoMR.     

Topological Superconductivity in Cu(x)Bi(2)Se(3)

A topological superconductor (TSC) is characterized by the topologically protected gapless surface state that is essentially an Andreev bound state consisting of Majorana fermions. While a TSC has not yet been discovered, the doped topological insulator Cu(x)Bi(2)Se(3), which superconducts below ～3 K, has been predicted to possess a topological superconducting state. We report that the point-contact spectra on the cleaved surface of superconducting Cu(x)Bi(2)Se(3) present a zero-bias conductance peak (ZBCP) which signifies unconventional superconductivity. Theoretical considerations of all possible superconducting states help us conclude that this ZBCP is due to Majorana fermions and gives evidence for a topological superconductivity in Cu(x)Bi(2)Se(3). In addition, we found an unusual pseudogap that develops below ～20 K and coexists with the topological superconducting state.     

Ultrashort pulse generation using fiber FM laser

Ultrashort optical pulse generation using a fiber FM laser is presented and analyzed in detail. Fiber FM laser operation is realized using a fiber ring with an internal phase modulator and an erbium-doped fiber amplifier. To compress FM laser pulses, an external dispersive single-mode fiber is employed. Furthermore, by external intensity modulation, the pulse background is removed. The background ratio of the generated ultrashort pulse is calculated and compared with the experimental results. The experimental results show an output optical pulse width of 1.77 ps and a spectral bandwidth of 0.5 THz.     

Bistable Optical Devices Using Laser Diodes Coupled to Interference Filters

A bistable optical device was demonstrated by using the longitudinal mode hopping of the laser diode and the narrow transmission spectrum of an interference filter. The device is capable of converting changes in the wavelength of the laser diode into changes in intensity by transmitting it through the filter. Exclusive OR operation was observed with the use of triple signal outputs. In addition, an optical switch-off phenomenon was confirmed by directly injecting a pulse 500 ps wide into an external dye laser.     

The synthesis and crystal structure of a new diprotonated Schiff base cryptand

Abstract

The synthesis and crystal structure of the diprotonated cryptand derived from the reaction of tren and 2,6-diacetyl pyridine is reported. The imino nitrogens of the Schiff base linkages are directed so that the dicarbimine functions are in trans, trans geometry relative to the pyridine C-N bond. This configuration has not previously been reported in related pyridine-derived Schiff base macrocycles.     

Command surfaces, 20. Fixation of surface-assisted homogeneous alignment of nematic liquid crystals by cationic photopolymerization

The surface-assisted alignment of a nematic liquid crystal yields a persistent ordered structure upon cationic photopolymerization of liquid-crystalline epoxides. Linearly polarized light irradiation of a photocrosslinkable polymer containing azobenzene moieties played a crucial role in this procedure since the photoinduced alignment is not deteriorated by heating for polymerization.     

Synthesis and reactions of optically pure cyclohexyl(o-methoxyphenyl)phosphine-borane and t-butyl-(o-methoxyphenyl)phosphine-borane

Cyclohexyl(o-methoxyphenyl)menthyloxyphosphineborane and t-butyl(o-methoxyphenyl)menthyloxyphosphine-borane were prepared from dichlorocyclohexylphosphine and t-butyldichlorophosphine by successive treatments with (−)-menthol, o-methoxyphenylmagnesium bromide, and borane-THF complex. The separated pure diastereomers of each of the compounds underwent reaction with lithium naphthalenide to afford optically pure cyclohexyl(o-methoxyphenyl)phosphine-borane and t-butyl(o-methoxyphenyl)phosphine-borane, respectively. These secondary phosphine-boranes reacted readily with various electrophiles in the presence of bases with virtually net retention of configuration. A new chiral phosphine ligand, (S,S)-1,2-bis[cyclohexyl(o-methoxyphenyl)phosphino]ethane was synthesized via the optically pure phosphine-boranes.     

Stereospecific and asymmetric polymerization of 1-phenyldibenzosuberyl methacrylate with radical and anionic initiators

Stereospecific and asymmetric (helix-sense-selective) polymerization of 1-phenyldibenzosuberyl methacrylate (PDBSMA) was performed with radical and anionic initiators. A highly isotactic polymer having triad isotacticity greater than 97% was obtained by radical polymerization with (i-PrOCOO)₂ at 40°C. The radical polymerization of PDBSMA in (+)- and (-)-menthol gave (-)-and (+)-polymers, respectively, whose optical activity is ascribed to the prevailing one-handed helical conformation of a polymer chain. The radical copolymerization of PDBSMA with a small amount of an optically active monomer, (+)-phenyl-2-pyridyl-o-tolylmethyl methacrylate, afforded an optically active copolymer with the prevailing one-handed helical structure of PDBSMA sequences. Asymmetric anionic polymerization of PDBSMA was carried out with the complex of N, N′-diphenylethylenediamine monolithium amide and a chiral ligand, (+)-1-(2-pyrrolidinylmethyl)pyrrolidine in toluene at −78°C. The obtained polymer was highly isotactic and optically active due to nearly 100% one-handed helical structure.     

New fabrication approach to develop a high birefringence photo-crosslinked film based on a sulfur-containing liquid crystalline molecule with large temperature dependence of birefringence

ABSTRACT

We present a new fabrication approach to achieve a high birefringence film by means of photopolymerization based on an alkylthio-containing rod-like liquid crystalline molecule exhibiting large temperature dependence of birefringence. We designed a new reactive mesogen having alkylthio linkages (BPM–S). It was found that BPM–S had a larger increment of birefringence with decreasing temperature, relative to commercially available alkoxy analog LC242. This result could be thought to be due to enhanced intermolecular attractive interaction for an alkylthio mesogen implied by the proximity of laterally neighboring molecules and cybotactic nematic tendency based on wide-angle X-ray measurement. The uniaxially-aligned photo-polymerized film for BPM–S showed higher birefringence than that for LC 242.