Dynamic assembly of porphyrin wires trapped on a highly oriented pyrolitic graphite surface

Carefully designed porphyrin building blocks assemble through selective imidazole binding in various solvents to form linear multiporphyrin objects. From a dynamic mixture of monomers, dimers, and oligomers, linear objects were observed on a highly oriented pyrolitic graphite (HOPG) surface. On the surface, the objects' morphology clearly depended on the solvent used for deposition and was modified upon heating.     

First principles study of sulfuric acid anion adsorption on a Pt(111) electrode

A first principles theory combined with a continuum electrolyte theory is applied to adsorption of sulfuric acid anions on Pt(111) in 0.1 M H(2)SO(4) solution. The theoretical free energy diagram indicates that sulfuric acid anions adsorb as bisulfate in the potential range of 0.41 < U ≤ 0.48 V (RHE) and as sulfate in 0.48 V (RHE) < U. This diagram also indicates that sulfate inhibits formations of surface oxide and hydroxide. Charge analysis shows that the total charge transferred for the formation of the full coverage sulfate adlayer is 90 μC cm(-2), and that the electrosorption valency value is -0.45 to -0.95 in 0.41 < U ≤ 0.48 V (RHE) and -1.75 to -1.85 in U > 0.48 V (RHE) in good agreement with experiments reported in the literature. Vibration analysis indicates that the vibration frequencies observed experimentally at 1250 and 950 cm(-1) can be assigned, respectively, to the S-O (uncoordinated) and symmetric S-O stretching modes for sulfate, and that the higher frequency mode has a larger potential-dependence (58 cm(-1) V(-1)) than the lower one.     

Ruthenium‐Catalyzed Transfer‐Hydrogenative Cyclization of 1,6‐Diynes with Hantzsch 1,4‐Dihydropyridine as a H2 Surrogate

The transfer‐hydrogenative cyclization of 1,6‐diynes with Hantzsch 1,4‐dihydropyridine as a H₂ surrogate was performed in the presence of a cationic ruthenium catalyst of the type [Cp′Ru(MeCN)₃PF₆]. Exocyclic 1,3‐dienes or their 1,4‐hydrogenation products, cycloalkenes, were selectively obtained, depending on the substrate structure and the reaction conditions.     

Solution‐processable colorless polyimides derived from hydrogenated pyromellitic dianhydride with controlled steric structure

This work presents novel colorless polyimides (PIs) derived from 1R,2S,4S,5R‐cyclohexanetetracarboxylic dianhydride (H″‐PMDA). Isomer effects were also discussed by comparing with PI systems derived from conventional hydrogenated pyromellitic dianhydride, that is, 1S,2R,4S,5R‐cyclohexanetetracarboxylic dianhydride (H‐PMDA). H″‐PMDA was much more reactive with various diamines than H‐PMDA, and the former led to PI precursors with much higher molecular weights. The results can be explained from the quite different steric structures of these isomers. The thermally imidized H″‐PMDA‐based films were colorless regardless of diamines because of inhibited charge‐transfer interaction. In particular, the H″‐PMDA/4,4′‐oxydianiline system simultaneously achieved a very high T_g exceeding 300 °C, high toughness (elongation at break > 70%), and good solution processability. In contrast, the H‐PMDA‐based counterparts were essentially insoluble. The outstanding solubility of the former probably results from disturbed chain stacking by its nonplanar steric structure. An advantage of chemical imidization process is also proposed. In some cases, a copolymerization approach with an aromatic tetracarboxylic dianhydride was effective to improve the thermal expansion property. The results suggest that the H″‐PMDA‐based PI systems can be promising candidates for novel high‐temperature plastic substrate materials in electronic paper displays. A potential application as optical compensation film materials in liquid crystal displays (LCD) is also proposed in this work. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and cation-binding properties of poly-and bis(thiacrown ether)s

Poly- and bis(thiacrown ether) derivatives in which some oxygen atoms of benzocrown ether moiety are replaced by sulfur atoms have been synthesized. Their cation-binding abilities were investigated by using the solvent extraction method. The poly- and bis(benzothiacrown ether)s showed great affinity for silver ion, being more excellent in the affinity than the corresponding monocyclic analogs. They, however, possess very poor cation-binding ability for alkali and alkaline-earth metal ions. The poly- and bis(thiacrown ether)s also bind mercuric ions effectively, whereas the corresponding monomeric analogs do not at all.     

A p‐Quinodimethane‐Bridged Porphyrin Dimer

A p‐quinodimethane (p‐QDM)‐bridged porphyrin dimer 1 has been prepared for the first time. An unexpected Michael addition reaction took place when we attempted to synthesize compound 1 by reaction of the cross‐conjugated keto‐linked porphyrin dimers 8 a and 8 b with alkynyl/aryl Grignard reagents. Alternatively, compound 1 could be successfully prepared by intramolecular Friedel–Crafts alkylation of the diol‐linked porphyrin dimer 14 with concomitant oxidation in air. Compound 1 shows intense one‐photon absorption (OPA, λ_max=955 nm, ε=45400 M ^?1 cm^?1) and a large two‐photon absorption (TPA) cross‐section (σ⁽²⁾_max=2080 GM at 1800 nm) in the near‐infrared (NIR) region due to its extended π‐conjugation and quinoidal character. It also exhibits a short singlet excited‐state lifetime of 25 ps. The cyclic voltammogram of 1 displays multiple redox waves with a small electrochemical energy gap of 0.86 eV. The ground‐state geometry, electronic structure, and optical properties of 1 have been further studied by density functional theory (DFT) calculations and compared with those of the keto‐linked dimer 8 b . This research has revealed that incorporation of a p‐QDM unit into the porphyrin framework had a significant impact on its optical and electronic properties, leading to a novel NIR OPA and TPA chromophore.     

Fully automated reagent peak‐free liquid chromatography fluorescence analysis of highly polar carboxylic acids using a column‐switching system and fluorous scavenging derivatization

In this study, we combined a column‐switching system with a fluorous scavenging derivatization method to develop a fully automated reagent peak‐free LC fluorescence detection protocol for the analysis of highly polar carboxylic acids. In this method, highly polar carboxylic acids were derivatized with fluorescent 1‐pyrenemethylamine in the presence of 1‐ethyl‐3‐(3‐dimethylaminopropyl)carbodiimide and 1‐hydroxy‐1H‐benzotriazole. Residual excess of the unreacted reagent was tagged with 2‐(perfluorooctyl)ethyl isocyanate and then removed selectively using a fluorous column‐switching system placed in front of an analytical reversed‐phase column. The signal of the fluorous‐tagged unreacted reagent was completely absent in the resulting chromatograms; therefore, it did not interfere with the quantification of each acid especially those eluted before 20 min. The detection limits (S/N = 3) for the examined acids were in the range from 4.0 to 22 fmol per injection. We have applied this method to comparative analysis of highly polar carboxylic acids in urine samples obtained from diabetes mellitus type‐II model mice and their control.     

Time Courses and Time‐Resolved Spectra of Firefly Bioluminescence Initiated by Two Methods of ATP Injection and Photolysis of Caged ATP

The time‐dependent characteristics of firefly bioluminescence initiated by manual injection of adenosine triphosphate (ATP) into buffer solution containing luciferin (Ln), luciferase (Luc) and Mg²⁺ were measured with a resolution of 10 ms, and compared with those obtained by photolysis of caged ATP. The time course depends on pH; both rise and decay rates decrease when pH is lowered from 7.8 to 6.8. In contrast, the parameter λ in the kinetic formula related to diffusion of ATP is almost independent of pH. The pH dependence of the time course of bioluminescence can be explained by the same pH tendency as the rate of ATP binding at the active site of Luc. The time‐resolved spectra can be decomposed into two Gaussian components with maxima at 2.2 and 2.0 eV. At pH 7.8, the band at 2.2 eV is more intense than that at 2.0 eV for all three concentration conditions. At lower pH, the band at 2.2 eV becomes weaker than that at 2.0 eV. The intensity ratio of the 2.0 and 2.2 eV bands is constant for duration time of 600 s for both injection and photolysis experiments, and the above conclusions are unaffected by the concentration ratio [Ln]/[Luc].     

Ubiquitous strategy for probing ATR surface-enhanced infrared absorption at platinum group metal-electrolyte interfaces

A versatile two-step wet process to fabricate Pt, Pd, Rh, and Ru nanoparticle films (simplified as nanofilms hereafter) for in situ attenuated total reflection Fourier transform infrared (ATR-FTIR) study of electrochemical interfaces is presented, which incorporates an initial chemical deposition of a gold nanofilm on the basal plane of a silicon prism with the subsequent electrodepostion of desired platinum group metal overlayers. Galvanostatic electrodeposition of Pt, Rh, and Pd from phosphate or perchloric acid electrolytes, or potentiostatic electrodeposition of Ru from a sulfuric acid electrolyte, yields sufficiently "pinhole-free" overlayers as evidenced by electrochemical and spectroscopic characterizations. The Pt group metal nanofilms thus obtained exhibit strongly enhanced IR absorption. In contrast to the corresponding metal films electrochemically deposited directly on glassy carbon and bulk metal electrodes, the observed enhanced absorption for the probe molecule CO exhibits normal unipolar band shapes. Scanning tunneling microscopic (STM) images reveal that fine nanoparticles of Pt group metals are deposited around wavy and stepped bunches of Au nanoparticles of relatively large sizes. This ubiquitous strategy is expected to open a wide avenue for extending ATR surface-enhanced IR absorption spectroscopy to explore molecular adsorption and reactions on technologically important transition metals, as exemplified by successful real-time spectroscopic and electrochemical monitoring of the oxidation of CO at Pd and that of methanol at Pt nanofilm electrodes. The spectral features of free water molecules coadsorbed with CO on Pt, Pd, Rh, and Ru are also discussed.     

Tunable surface-enhanced infrared absorption on au nanofilms on si fabricated by self-assembly and growth of colloidal particles

Au colloids were used to fabricate nanoscale-tunable Au nanofilms on silicon for surface-enhanced IR absorption bases in both ambient and electrochemical environments. This wet process incorporates the self-assembly of colloidal Au monolayer using 3-aminopropyl trimethoxysilane as the organic coupler with subsequent chemical plating in an Au(III)/hydroxylamine solution. FTIR spectroscopy in transmission mode of the probe species SCN- was used to evaluate the apparent surface enhancement in IR absorption of 2D Au colloid arrays and chemically plated Au particles. The nanostructure of Au films was examined by atomic force microscopy. The IR and AFM results show that the apparent surface enhancement factor (1-2 orders of magnitude) increases with increasing sizes and/or contact, and the severe aggregation of Au nanoparticles may cause the bipolar band shape. Cyclic voltammetry on the Au nanofilm obtained by the above nucleation and growth strategy exhibits a feasible electrochemical stability and behavior. In situ ATR-FTIR measurement of p-nitrobenzoic acid adsorption demonstrates that the as-grown Au film yields rather promising surface enhancement as well.