Theoretical analysis of the performance of a model supercapacitor consisting of metal oxide nano-particles

The factors influencing the electrochemical behaviour of a supercapacitor have been partly examined in this work. The effects of so-called intrinsic parameters, i.e. exchange current density, unit cell length and double layer (DL) capacitance; as well as the so-called application parameters, i.e. cell current, on the cell potential discharge time have been considered. The contributions of each type of capacitors, DL capacitor and faradaic supercapacitor under various states of operation and material have been analyzed, and the competing (compensating) effects of the two types of capacitors as regards to the discharge and power characteristics manifested by current–potential and energy–power (Ragone plots) are elucidated.     

Capillary electrophoresis with wavelength-resolved laser-induced fluorescence detection

Capillary electrophoresis (CE) enables rapid separations with high separation efficiency and compatibility with small sample volumes. Laser-induced fluorescence detection can result in extremely low limits of detection in CE. Single-channel fluorescence detection, however, furnishes little qualitative information about a species being detected, except for its CE migration time. Use of multidimensional information often enables unambiguous identification of analytes. Combination of CE with information-rich wavelength-resolved fluorescence detection is analogous with ultraviolet-visible diode-array detection and furnishes both qualitative and quantitative chemical information about target species. This review discusses recent advances in wavelength-resolved laser-induced fluorescence detection coupled with CE, with an emphasis on instrument design.     

Preparation and characterization of nitrogen-doped titanium dioxides

A type of high visible-light active titanium oxinitride(TiO2-xNx) powder was prepared by a simple proc-ess:the calcination of the hydrated titanium dioxide at the atmosphere of ammonia-argon using a tu-bular electric furnace at high temperatures. The hydrated titanium dioxide was synthesized as the precursor of TiO2-xNx using titanic acid as raw material,which came from sulfate technique of produc-ing titanium white. The effects of temperature and reaction time on the nitrogen content,grain size and crystal structure were studied. The visible-light activity and photocatalysis capability of the powder were also investigated.     

Structural and electrochemical studies of novel bis(mu-methoxo)diiron complexes: observation of Fe(III)Fe(IV) and Fe(IV)Fe(IV) states resonating with phenoxyl radicals

Novel diiron complexes with an Fe2(mu-OMe)2 core were studied as models of the active site of nonheme iron-containing enzymes. X-ray crystal structures of the complexes showed the existence of two types of ligand folding-parallel and twisted-both of which have four virtually equivalent phenolato groups sticking out from the Fe2O2 rhombic plane. Cyclic voltammetry measurements revealed two or more distinct redox waves in a region of relatively high potential, in addition to known Fe(II)/Fe(III) redox waves in a region of lower potential. These new peaks were assigned to the high-valence state of iron atoms, that is, Fe(III)Fe(IV) and Fe(IV)Fe(IV), resonating with the phenoxyl radical(s). The split width of the redox waves ranged from 0.14 to 0.20 eV, which may be a measure of the electronic interaction of the phenolate groups through the Fe2(mu-OMe)2 core.     

Rhodamine B amine as a highly sensitive fluorescence derivatization reagent for saccharides in reversed-phase liquid chromatography

6-Rhodamine B amine functions as a highly sensitive fluorescence derivatization reagent for mono- and oligosaccharides; it reacts with the reducing end of saccharides under acidic conditions. The fluorescent derivatives of five monosaccharides can be separated within 25 min by reversed-phase liquid chromatography with isocratic elution. The detection limits (S/N = 3) for mono-, di-, and oligosaccharides are 7-51, 13, and 9-35 fmol/20 microl injection, which correspond to analyte concentrations of 35-255, 65, 45-175 nM, respectively. We have applied this derivatization method successfully to the analysis of the components of oligosaccharides in glycoproteins (ribonuclease B and fetuin) following their acidic or enzymatic hydrolysis. The results from these analyses are in good agreements with the reported values established previously.     

Nitrosation of Phenolic Compounds: Effects of Alkyl Substituents and Solvent

Summary.  Nitrosation reactions of phenol, o-cresol, 2,6-dimethylphenol, o-tert-butylphenol, 2-hydroxyacetophenone, and 2-allylphenol in water and water/acetonitrile were studied. Kinetic monitoring of the reactions was accomplished by spectrophotometric analysis of the nitrosated products at 345 nm. The dominant reaction was C-nitrosation via a mechanism consisting of an attack on the nitrosatable substrate by NO⁺/NO₂H₂ ⁺ followed by a slow proton transfer. The values of the rate constants of phenolic C-nitrosation were increased by electron donating substituents, and a good Hammett correlation was observed with ρ = −6.1. The results also revealed the strong effect of pH and the permitivity of the reaction medium on the rate constant, whose maximum values were observed for pH ≈ 3, decreasing strongly for higher pH values. The study in water/acetonitrile with up to 25% acetonitrile showed that it is possible to inhibit the reaction strongly by increasing the percentage of the organic component. The conclusions drawn show that (i) it is possible to predict the rate of nitrosation of phenolics as a function of the meta-substituents on the phenol ring and (ii) the nitrosation of phenolics can be strongly inhibited by increasing the pH of the reaction medium as well as by lowering its dielectric constant. Received July 13, 2001. Accepted (revised) September 18, 2001     

Preparation and characterization of Co(II), Ni(II) and Cu(II) complexes of a ligand containing 1,3,4-thiadiazole groups

(1R,2R)-1,2-bis-(5-amino-1,3,4-thiadiazole-2-yl)ethane-1,2-diol (L) has been prepared by the reaction of thiosemicarbazide with (2R,3R)-(+)-tartaric acid (I) and phosphorous oxychloride, and its complexes with Co(II), Ni(II) and Cu(II) have been obtained. The structures of the ligand and its complexes have been established by i. r., ¹H- and ¹³C-n.m.r. spectra, u.v.–vis–nir spectroscopy, elemental analyses, T.g.-D.t.a. and magnetic susceptibility measurements.     

The effect of thermal pretreatment on the electrochemical response for palladium in aqueous media

Previous work on the electrochemistry of palladium in aqueous acid solution demonstrated the existence of two multilayer hydrous oxide reduction peaks, one at ca. 0.24 V and another at ca. 0.55 V vs. RHE, plus the presence of a reversible active surface state transition at ca. 0.24 V. In the present work with thermally activated palladium it was observed that, in agreement with the hydrous oxide reduction behaviour of the system, there is a second active state transition at E≥ca. 0.45 V. In most of its reactions in aqueous acid solution, apart from its unusual capacity to absorb hydrogen, palladium exhibits properties very similar to those of platinum; however, palladium seems to be more prone to dissolution and subsurface oxygen formation. Also the premonolayer oxidation responses of these two metals are often different as the more active state of the palladium surface is not as readily generated as that of platinum. The electrocatalytic properties of palladium, as reported earlier, correlate quite well with the hydrous oxide and premonolayer oxidation behaviour of this electrode system. Electronic Publication     

Screening method for organic aciduria by spectrofluorometric measurement of total dicarboxylic acids in human urine based on intramolecular excimer-forming fluorescence derivatization

A simple screening method of organic aciduria by spectrofluorometric measurement of total dicarboxylic acids in human urine is described. This method is based on an intramolecular excimer-forming fluorescence derivatization with a pyrene reagent, 4-(1-pyrene)butanoic acid hydrazide (PBH). Dicarboxylic acids in urine were converted to the corresponding dipyrene-labeled derivatives by reaction with PBH in the presence of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide and pyridine, and the derivatives afforded intramolecular excimer fluorescence (420-540 nm) which can clearly be discriminated from the normal fluorescence (360-420 nm) emitted from reagent blanks. The technique is so selective that it permits spectrofluorometric measurement of total amount of dicarboxylic acids by the direct derivatization of diluted urine samples. The same reaction mixture has also served as a liquid chromatographic (LC) sample for the separative determination of individual dicarboxylic acids. The spectrofluorometric data did not contradict with the LC data. These methods were usefully applied to preliminary screening test of glutaric aciduria. In conclusion, the present derivatization method allows rapid and direct determination of total amount of dicarboxylic acids in human urine samples.     

Tetranuclear Pt<Subscript>2</Subscript>Cu<Subscript>2</Subscript> Complex with a Staircase-Shaped Chain Aggregate in the Solid State

The reaction of the tetranuclear cyanide aquo complex [{Pt(CN)₄Cu(bipy)(H₂O)}₂]· 2H₂O with aqueous ammonia produces the new tetranuclear ammino-containing product [{Pt(CN)₄Cu(bipy)(NH₃)}₂] (1), with terminal cyanide groups and with NH₃ coordinated to the Cu atom. The distorted trigonal bipyramidal coordination about copper in 1 differs from the square-pyramidal coordination present in the starting material. The bipyridine ligand in 1 is nearly perpendicular to the tetranuclear core of the molecule, as opposed to its coplanar disposition in the aquo complex. The two platinum atoms of the tetranuclear core in 1 form Pt···Pt interactions of 3. 2390(8) Å with platinum atoms of neighboring molecules, producing an echelon-shaped supramolecular chain held together by staggered (CN)₄Pt···Pt(CN)₄ linkages, an aggregate structure which does not have a precedent in chemistry derived from the Pt(CN)₄ building block.