Peroxy radicals as motional probes at the end of isolated polystyrene chains and on the cellulose surfaces in vacuum

The isolated polystyrene chains spin-labeled with peroxide radical at the free end (IPSOO) in which the chain roots were covalently bonded to the surface of microcrystalline cellulose (MCC) powder were produced by mechanochemical polymerization of styrene initiated by MCC mechanoradicals. The IPSOO was used as motional probes at the ends of isolated polystyrene chains tethered on the surface of MCC powder. Two modes for the molecular motion of IPSOO were observed. One was a tumbling motion of IPSOO on the MCC surface, defined as a train state, and another was a free rotational motion of IPSOO protruding out from the MCC surface, defined as a tail state. The temperature of tumbling motion (T _tum ) of IPSOO at the train state was at 90 K with anisotropic correlation times. T _tum (90 K) is extremely low compared to the glass transition temperature (T _g ^b ; 373 K) of polystyrene in the bulk. At temperatures above 219 K, the IPSOO was protruded out from the MCC surface, and freely rotated at the tail state. The train–tail transition temperature (T _train–tail ) was estimated to be 222 K. T _tum (90 K) and T _train–tail (222 K) are due to the extremely low chain segmental density of IPSOO on the MCC surface under vacuum. The interaction between IPSOO and the MCC surface is a minor contributing factor in the mobility of IPSOO on the surface under vacuum. It was found that peroxy radicals are useful probes to characterize the chain mobility reflecting their environmental conditions.     

Synthesis and smectogenic properties of novel phloroglucinol-based star-shaped liquid crystals containing three peripheral alkyloxylated Schiff base arms

A series of symmetrical trimeric liquid crystalline compounds of which the molecular structure with a central core of 1,3,5-benzene attached by three rod-like mesogenic Schiff base moieties via the propylene spacers and ether linkages has successfully been synthesised and characterised by infra red and nuclear magnetic resonance spectroscopic techniques. All the star-shaped compounds in this series exhibit predominantly SmC phase except the analogue possessing terminal C₈H₁₇ group. It is apparent that the members with even parity from C₁₀H₂₁ to C₁₆H₃₃ show enantiotropic SmC phase while the member with longest terminal chain of C₁₈H₃₇ is inclined to monotropic smectogen. The X-ray diffraction measurements reveal that the tilted smectic layer structures of the SmC phase are confirmed to have an obvious sharp peak at small angles of 2θ ～ 1.03°–1.48° with d-spacing values of 4.01–4.58 nm, which are corresponding to tilt angles of ～48° in the SmC phase.     

Synthesis and properties of polyfluoro(silyl)acetylene nanoparticles by reaction of fluoro(silyl)acetylenes with triethylamine

Fluoro(silyl)acetylenes, which were prepared by reaction of 1,1-difluoroethylene with silyl chlorides, reacted with triethylamine to give dark-brown colored polyfluoro(silyl)acetylene powders in excellent to moderate isolated yields. In contrast, the corresponding nonfluorinated acetylene was unable to react with triethylamine at all to afford poly(silyl)acetylene under similar conditions. Polyfluoro(silyl)acetylenes thus obtained were nanometer size-controlled cubic fine particles with a good dispersibility and stability in a variety of solvents. These polyfluoro(silyl)acetylene nanoparticles exhibited clear absorption and emission spectra related to the conjugated units in polymer main chain. Furthermore, these polyfluoro(silyl)acetylene nanoparticles were applied to the surface modification of poly(methyl methacrylate) [PMMA] film to exhibit a higher oleophobicity imparted by fluorine on their surface, compared to that on the reverse side.

Intramolecular Benzyne–Phenolate [4+2] Cycloadditions

An intramolecular benzyne–phenolate [4+2] cycloaddition is reported. Benzyne precursors, having vicinal halogen‐sulfonate functionalities, linked with a phenol(ate) by various tether groups undergo efficient intramolecular [4+2] cycloaddition by treatment with either Ph₃MgLi or nBuLi for halogen–metal exchange to form various benzobarrelenes.     

Ni‐Catalyzed [4+3+2] Cycloaddition of Ethyl Cyclopropylideneacetate and Dienynes: Scope and Mechanistic Insights

A detailed study of the Ni‐catalyzed [4+3+2] cycloaddition reaction between ethyl cyclopropylideneacetate and dienynes has been conducted, resulting in the development of a new method for the synthesis of compounds containing nine‐membered rings. We studied the reactivity of various dienynes, together with their substituent and conformational effects. The mechanism of the reaction was probed by examining the stoichiometric reactions of the Ni complexes and dienynes.     

C3-symmetric trisimidazoline-catalyzed enantioselective bromolactonization of internal alkenoic acids

A method for conducting enantioselective bromolactonization reactions of trisubstituted alkenoic acids, using the C(3)-symmetric trisimidazoline 1 and 1,3-dibromo-5,5-dimethyl hydantoin as a bromine source, has been developed. The process generates chiral δ-lactones that contain a quaternary carbon. The results of studies probing geometrically different olefins show that (Z)-olefins rather than (E)-olefins are favorable substrates for the process. The method is not only applicable to acyclic olefin reactants but can also be employed to transform cyclic trisubstituted olefins into chiral spirocyclic lactones. Finally, the synthetic utility of the newly developed process is demonstrated by its application to a concise synthesis of tanikolide, an antifungal marine natural product.     

A novel separation technique of diastereomeric esters of pyridylethanols by extraction: formal total synthesis of PNU-142721, HIV-1 reverse transcriptase inhibitor

The separation of diastereomeric esters derived from (±)-pyridylethanols and 3β-acetoxyetienic acid were achieved by an extraction technique using diethyl ether and aqueous hydrochloric acid. A formal total synthesis of PNU-142721 was effectively carried out to prepare the chiral, non-racemic synthon 1-furo[2,3-c]pyridin-5-yl-ethanol (1) by means of this technique. The structure optimized using MOPAC calculations on each diastereomer suggested the presence of intramolecular CH/π interaction in only the (S)-isomer of the diastereomers.     

CpRuIIPF6/quinaldic acid-catalyzed chemoselective allyl ether cleavage. A simple and practical method for hydroxyl deprotection

A cationic CpRu(II) complex in combination with quinaldic acid shows high reactivity and chemoselectivity for the catalytic deprotection of hydroxyl groups protected as allyl ethers. The catalyst operates in alcoholic solvents without the need for any additional nucleophiles, satisfying the practical requirements of operational simplicity, safety, and environmental friendliness. The wide applicability of this deprotection strategy to a variety of multifunctional molecules, including peptides and nucleosides, may provide new opportunities in protective group chemistry. [structure: see text]     

In situ AFM studies on self-assembled monolayers of adsorbed surfactant molecules on well-defined H-terminated Si(111) surfaces in aqueous solutions

The formation of self-assembled monolayers (SAMs) of adsorbed cationic or anionic surfactant molecules on atomically flat H-terminated Si(111) surfaces in aqueous solutions was investigated by in situ AFM measurements, using octyl trimethylammonium chloride (C8TAC), dodecyl trimethylammonium chloride (C12TAC), octadecyl trimethylammonium chloride (C18TAC)) sodium dodecyl sulfate (STS), and sodium tetradecyl sulfate (SDS). The adsorbed surfactant layer with well-ordered molecular arrangement was formed when the Si(111) surface was in contact with 1.0x10(-4) M C18TAC, whereas a slightly roughened layer was formed for 1.0x10(-4) M C8TAC and C12TAC. On the other hand, the addition of alcohols to solutions of 1.0x10(-4) M C8TAC, C12TAC, or SDS improved the molecular arrangement in the adsorbed surfactant layer. Similarly, the addition of a salt, KCl, also improved the molecular arrangement for both the cationic and anionic surfactant layers. Moreover, the adsorbed surfactant layer with a well-ordered structure was formed in a solution of mixed cationic (C12TAC) and anionic (SDS) surfactants, though each surfactant alone did not form the well-ordered layer. These results were all explained by taking into account electrostatic repulsion between ionic head groups of adsorbed surfactant molecules as well as hydrophobic interaction between their alkyl chains, which increases with the increasing chain length, together with the increase in the hydrophobic interaction or the decrease in the electrostatic repulsion by incorporating alcohol molecules into the adsorbed surfactant layer, the decrease in the electrostatic repulsion by increasing the concentration of counterions, and the decrease in the electrostatic repulsion by alternate arrangement of cationic and anionic surfactant molecules. The present results have revealed various factors to form the well-ordered adsorbed surfactant layers on the H-Si(111) surface, which have a possibility of realizing the third generation surfaces with flexible structures and functions easily adaptable to circumstances.     

Synthesis, Characterization, and Crystal Structure of a (&mgr;-Oxo)bis(&mgr;-acetato)diiron(III) Complex with a Dinucleating Hexapyridine Ligand, 1,2-Bis[2-(bis(2-pyridyl)methyl)-6-pyridyl]ethane. The First Example of a Discrete (&mgr;-Oxo)bis(&mgr;-acetato)diiron(III) Complex with a Dinucleating Ligand

A mononucleating tripyridine ligand, 2-(bis(2-pyridyl)methyl)-6-methylpyridine (L(1)), and a dinucleating hexapyridine ligand, 1,2-bis[2-(bis(2-pyridyl)methyl)-6-pyridyl]ethane (L(2)), have been prepared. The reaction of a carbanion of 2,6-lutidine with 2-bromopyridine affords L(1) which is converted to L(2) quantitatively by treating with tert-butyllithium and 1,2-dibromoethane. (&mgr;-Oxo)bis(&mgr;-acetato)diiron(III) complexes [Fe(2)(O)(OAc)(2)(L(1))(2)](ClO(4))(2) (1) and [Fe(2)(O)(OAc)(2)L(2)](ClO(4))(2) (2) have been synthesized and characterized by means of infrared, UV/vis, mass, and M?ssbauer spectroscopies and by measuring magnetic susceptibility and cyclic voltammograms. All the spectral data are consistent with the (&mgr;-oxo)bis(&mgr;-acetato)diiron(III) core structure in both 1 and 2. A relatively strong molecular ion peak at m/z 865 corresponding to [{Fe(2)O(OAc)(2)L(2)}(ClO(4))](+) in a FAB mass spectrum of 2 suggests the stabilization of the (&mgr;-oxo)bis(&mgr;-acetato)diiron(III) core structure by L(2) in a solution state. The compound 2.DMF.2-PrOH.H(2)O, chemical formula C(44)Cl(2)Fe(2)H(51)N(7)O(16), crystallizes in the monoclinic space group C2/c with a = 22.034(6) ?, b = 12.595(5) ?, c = 20.651(7) ?, beta = 121.49(2) degrees, and Z = 4. The cation has 2-fold symmetry with the bridging oxygen atom on the 2-fold axis: Fe-(&mgr;-O) = 1.782(5) ?, Fe-O-Fe = 123.6(6) degrees, and Fe.Fe = 3.142(3) ?. The diiron(III) core structure of 2 seems to be stabilized by encapsulation of the ligand. Compound 2 is the first example of a discrete (&mgr;-oxo)bis(&mgr;-acetato)diiron(III) complex with a dinucleating ligand.