Gelation in free-radical terpolymerization of poly(allyl methacrylate) crosslinked polymer nanosphere with allyl benzoate and vinyl benzoate

Microgel-like poly(allyl methacrylate) (PAMA nanosphere) was prepared by the emulsion polymerization of AMA as the reactive crosslinked polymer nanosphere with abundant pendant allyl groups. The terpolymerization of PAMA nanosphere with allyl benzoate (ABz) and vinyl benzoate (VBz) was conducted in bulk using benzoyl peroxide as initiator at 80 °C. The gelation depended on the feed ABz/VBz molar ratio since the molecular weights of resulting poly(ABz-co-VBz)s that act as the bridges increased with an increase in the mole fraction of VBz in the feed monomer. Beyond the gel point, the sol was rapidly incorporated into the gel and the increasing tendency of the gel fraction became steeper from 70 to 95 mol% of VBz as a reflection of increased chain length of bridge between PAMA nanospheres. Moreover, the swelling ratio became lower with increasing the mole percentage of VBz in the feed monomer. These results would support the preferential incorporation of PAMA nanosphere into the gel and the longer bridge can capture more nanospheres to give a much shrunken gel.     

A novel separation technique of diastereomeric esters of pyridylethanols by extraction: formal total synthesis of PNU-142721, HIV-1 reverse transcriptase inhibitor

The separation of diastereomeric esters derived from (±)-pyridylethanols and 3β-acetoxyetienic acid were achieved by an extraction technique using diethyl ether and aqueous hydrochloric acid. A formal total synthesis of PNU-142721 was effectively carried out to prepare the chiral, non-racemic synthon 1-furo[2,3-c]pyridin-5-yl-ethanol (1) by means of this technique. The structure optimized using MOPAC calculations on each diastereomer suggested the presence of intramolecular CH/π interaction in only the (S)-isomer of the diastereomers.     

Rapid racemization of chiral non-racemic sec-alcohols catalyzed by (η-C5(CH3)5)Ru complexes bearing tertiary phosphine-primary amine chelate ligands

A ternary catalyst system of Cp*RuCl(cod)-2-diphenylphosphinoethylamine-KOt-Bu (Cp*=η⁵-C₅(CH₃)₅, cod=1,5-cyclooctadiene) causes rapid racemization of chiral non-racemic sec-alcohols, which results from the reversible hydrogen transfer between sec-alcohols and ketones. Both tertiary phosphine and primary amine functionalities in the ligand are responsible for the high rate.     

Chemo-enzymatic Synthesis of Novel Oligo-N-acetyllactosamine Derivatives having a β(1-4)–β(1-6) Repeating Unit by Using Transition State Analogue Substrate

Chitinase-catalyzed hydrolytic and transglycosylating behavior of 1,2-oxazoline derivative of N-acetyllactosamine (LacNAc-oxa) 1 has been investigated. An extremely rapid hydrolysis (ring-opening of the oxazoline moiety) could be observed, suggesting that 1 behaves as a transition state analogue substrate for chitinase A1 (Bacillus circulans WL-12). This disaccharide monomer 1 was found to polymerize under basic conditions, giving rise to novel oligosaccharides having a β(1-4)–β(1-6) repeating unit in the main chain. The degree of polymerization of the resulting oligosaccharides was up to 5. This is the first example of enzymatic glycosylation reaction forming a β(1-6) bond catalyzed by chitinase.     

Parallel synthesis of tandem Ugi/Diels-Alder reaction products on a soluble polymer support directed toward split-pool realization of a small molecule library

A series of parallel reactions were carried out for the tandem Ugi/Diels-Alder reaction on our MPEG-O-CH₂- platform. Ninety-six out of a 100 entries were successful to give complex heterotricycles. The stereoselectivity was found not to be influenced by the building blocks used for amine and carboxylic acid components. An unexpected side pathway was found but was suppressed by employing appropriate reaction conditions. The reaction was also performed on solid phase, by which a larger library is potentially realized by employing the split-pool method.     

Pre-concentration of traces of tin by coprecipitation with yttrium hydroxide for electrothermal atomisation atomic absorption spectrometry

Summary Trace amounts of tin were concentrated by coprecipitation and determined by electrothermal atomisation atomic absorption spectrometry. Yttrium hydroxide coprecipitated quantitatively 0.1–3 g of tin from 50–500 ml of sample solution at pH 9.5–11.2. The atomic absorbance of tin increased about twice by using an impregnated graphite tube with yttrium. The impregnated graphite tube, furthermore, improved the reproducibility of the measurement of tin. A linear calibration graph was obtained in the range of 0.004–0.12 g/ml of tin. Twenty-three foreign ions did not interfere seriously. The method was applicable to the determination of tin in zinc metal.     

On-line column preconcentration for the determination of cobalt in sea water by flow-injection chemiluminescence detection

A flow-injection method for the determination of dissolved cobalt(II) in sea water has been studied based on a combination of column preconcentration using 8-quinolinol immobilized on silica gel, fluoride containing metal alkoxide glass (8HQ-MAF) and chemiluminescence detection with a gallic acid-hydrogen peroxide system. Co(II) is selectively recovered from an acidified sample with 8-quinolinol immobilized on silica gel. After elution with dilute hydrochloric acid the resultant eluent is mixed with the reagent solutions, heated to 60^°C and then introduced into the CL cell. The analysis time including the 2-min sample load was 8 min per sea water sample with a corresponding detection limit of 0.62 ngl^-1 (3). The average standard deviation calculated for 10 replicate measurements of artificial sea water samples with a concentration of 10 ngl^-1 cobalt was ±2.1%. The method has been tested with the standard reference sea waters NASS and CASS.     

Determination of rare earth elements in seawater by on-line column preconcentration inductively coupled plasma mass spectrometry

A home made column of commercially available iminodiacetate resin, Muromac A-1 (50–100 mesh) was used to concentrate rare earth elements (REEs) (15 elements: Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu) in seawater. An automated low pressure flow analysis method with on-line column preconcentration/inductively coupled plasma mass spectrometry (ICP-MS) is described for the determination of REEs in seawater. Sample solutions (adjusted to pH of 3.0) passed through the column. After washing the column with water, the adsorbed elements were subsequently eluted into the plasma with 0.7 M nitric acid. Calibration curves were accomplished by means of purified artificial seawater with a sample loading time of 120 s. Detection limits (DLs) of the on-line column preconcentration/ICP-MS by eight replicate operations were between 0.040 and 0.251 pg ml⁻¹ for REEs in the artificial seawater. The precision was less than 8.9% for REEs and one sample can be processed in 7 min using a 7 ml of sample. The proposed method was applied to determine REEs in coastal seawater of Hiroshima Bay, Japan.     

Effects of a Single Exposure to UVB Radiation on the Activities and Protein Levels of Copper-Zinc and Manganese Superoxide Dismutase in Cultured Human Keratinocytes

Abstract— Ultraviolet B irradiation has been believed to decrease or impair the activity of reactive oxygen species (ROS) scavenging enzymes such as superoxide dismutase (SOD) in the skin. It has been recently reported that two isozymes of SOD, namely copper-zinc SOD (Cu-Zn SOD) and manganese SOD (Mn SOD), exist in mammalian cells and that the two enzymes play different roles in living systems. The aim of this study was to investigate changes in SOD activities and protein levels in cultured human keratinocytes after acute UVB irradiation. In addition, the protein levels of Cu-Zn SOD and Mn SOD were quantified separately. A single exposure to UVB irradiation produced an increase in SOD activity and protein level that peaked immediately after UVB irradiation, after which a decline was observed, with subsequent recovery to baseline levels 24 h after irradiation. In individual assays of Mn SOD and Cu-Zn SOD, the amount of Mn SOD protein decreased and then gradually recovered 24 h after irradiation. In contrast, the amount of Cu-Zn SOD protein increased immediately after UVB irradiation, and then gradually declined. To evaluate the mechanisms of these changes, we examined the effects of the cytokines, interleukin-1α (IL-1α) and tumor necrosis factor-α (TNF-α), which can be secreted from keratinocytes after UVB irradiation, on the SOD activity and protein levels in keratinocytes. Interleukin-la and TNF-α enhanced both the SOD activity and protein level of Mn SOD, while these cytokines had no effect on Cu-Zn SOD protein levels in cultured human keratinocytes after incubation for 24 h. Furthermore, when neutralizing antibodies against IL-1α and TNF-α were added separately or together to the culture medium before UVB irradiation, the recovery of total SOD activity and Mn SOD protein level were markedly inhibited 24 h after irradiation. Our results suggest that significant increases in SOD activity and protein level occur as a cutaneous antioxidant defense mechanism that protects against the cytotoxicity as a result of UVB irradiation, and that this increase in SOD is attributed to Cu-Zn SOD. The Cu-Zn SOD and Mn SOD protein levels changed in a different manner after UVB irradiation. The former may participate in an early phase and the latter in a late phase defense mechanism directed against oxidant cytotoxicity through UVB irradiation. In addition, the recovery of Mn SOD to baseline levels 24 h after UVB irradiation seems to be mediated through cytokines such as IL-1α and TNF-α, which are secreted from keratinocytes.     

New odorless method for the Corey-Kim and Swern oxidations utilizing dodecyl methyl sulfide (Dod-S-Me)

Development of the odorless dodecyl methyl sulfide (Dod-S-Me, 1) as an alternative for dimethyl sulfide (DMS) and new odorless methods for the Corey-Kim and Swern oxidations are described. These reactions have been developed with a view toward green chemistry, utilizing Dod-S-Me (1) and common solvents instead of dichloromethane.