Selective reduction of tertiary alkyl,benzyl, and allyl halides to hydrocarbons using lithium 9,9-di-n-butyl-9-borabicyclo[3.3.1]nonanate

The title 9-borabicyclo[3.3.1]nonane(9-BBN) ate complex (1) brings about selective removal of tertiary alkyl, benzyl and allyl halides to give the corresponding hydrocarbons in excellent yields without concomitant attack on secondary, primary and aryl derivatives. The reduction of cis- and trans - 4 - t - butyl - 1 - methylcyclohexyl chlorides (2) with 1 gives 4 - t - butyl - 1 - methylcyclohexanes (3) with partial inversion of configuration in cyclohexane, while that in benzene gives thermodynamically stable trans-3 predominantly. The reactions of 1,1 - dimethyl - 5 - hexenyl chloride (4) and 1,7,7 - trimethylbicyclo[2.2.1]hept - 2 - yl chloride (8) with 1 proceed with the rearrangements characteristic to a carbonium ion intermediate. The reduction of 1 - ethyl - 1 - methylpentyl chloride with 1 follows a second-order rate equation.     

Ligand-exchange ion chromatographic determination of malic acid enantiomers in apple juice with photometric detection.

An ion chromatographic separation with photometric detection using a chiral copper(II) complex as the eluent has been developed for the resolution of enantiomers of malic acid in commercially available apple juices. The results obtained by this method were in good agreement with those by an enzymatic method with separation by high-performance liquid chromatography.     

High pressure and high temperature investigations in the system MgOSiO2H2O

The system MgOSiO₂H₂O was investigated at pressures between 40 and 95 kbar and at temperatures between 500 and 1400°C. The reaction products were examined by X-ray, optical and thermal analysis techniques and the density of phase A discovered by Ringwood and Major was also measured. It was found that phase A was hydrated and its chemical formula was H₆Mg₇Si₂O₁₄. When the $\text{Mg}\text{Si}$ ratio of the system is 2, phase A + clinoenstatite, and forsterite are stable at temperatures lower and higher than a boundary curve T (°C) = 10P (kbar), respectively. When the $\text{Mg}\text{Si}$ ratio of the system is 3, phase A + phase D (which is completely different from the phases, A, B and C discovered by Ringwood and Major, and any other known phases of magnesium silicate) and phase D + brucite are stable at temperatures lower and higher than a boundary curve T(°C) = 10P (kbar) + 200. Phase A has approximately an hexagonal symmetry and the space group and the lattice parameters are determined as P6₃ or $\text{P6}{}_3\text{m}$ and a = 7.866(2) Å and c = 9.600(3) Å, respectively. The measured density is 2.96 ± 0.02 g/cm³. The optical observations show that phase A is biaxial positive crystal with refractive indices α = 1.638 ± 0.001, β = 1.640 ± 0.002, and γ = 1.649 ± 0.001. Some interpretation is given on the inconsistency between the symmetry determined by the X-ray diffraction and the optical observation. The new phase D belongs to the space group $\text{P2}{}_1\text{c}$ with lattice parameters a = 7.914(2)Å, b = 4.752(1) Å, c = 10.350(2) Å and β = 108.71(5)° and is a biaxial crystal with refractive indices α = 1.630 ± 0.002, β = 1.642 ± 0.002 and γ = 1.658 ± 0.001.     

Adsorption properties of activated carbon from waste newspaper prepared by chemical and physical activation

Adsorption properties of activated carbons prepared from waste newspaper by chemical and physical activation were investigated using water vapor, ammonia, methane, and methylene blue (MB) as adsorbents. The water vapor adsorption isotherms show type V behavior and the maximum vapor adsorption of the chemically and physically activated products is about 1050 and 450 ml/g, respectively. The higher water vapor adsorption of the chemically activated products is attributed to the higher specific surface area (S(BET)) and greater hydrophilic activity (arising from the surface oxygen-containing functional groups) than in the physically activated products. The adsorption of ammonia and methane was measured by temperature-programmed desorption (TPD). NH(3) adsorption is found to be higher in the chemically activated product than in the physically activated product while methane adsorption is slightly higher in the physically activated products even though these have lower S(BET) values. In the MB adsorption, the chemically activated products show higher adsorption (390 mg/g) than the physically activated product. These results are suggested to be related to the surface characteristics.     

Photoreaction of anthracenyl phosphine oxides: Usual reversible photo- and heat-induced emission switching,and unusual oxidative PC bond cleavage

Anthracenyl(diphenyl)phosphine oxide and dianthracenylphenylphosphine oxide as photoactive compounds have been synthesized. Anthracenyl group of these compounds indicate the multi-functional roles such as an emission component, a photodimerization component, and a leaving group. When the light irradiation was performed under an oxygen atmosphere, photo-oxidative PC bond cleavage to leave the antharacenyl group was observed. Moreover, phosphonyl radical was produced and then PP bond formation to form diphosphane was observed.     

Phylogenetic analysis of picoplankton in Lake Biwa and application to legal medicine

Three strains of picoplankton designated as brown, green, and pink belonging to the Synechococcus genus in cyanobacteria (approximately 1 microm in size) are found ubiquitously in Lake Biwa, Japan. However, they could not be morphologically discriminated from other bacteria such as Proteobacteria and Bacillus by microscopy. In this study, we attempted to use the polymerase chain reaction (PCR) analysis of the 16S ribosomal DNA (rDNA) from picoplankton for the diagnosis of death by drowning. A segment of 16S rDNA was sequenced in order to investigate their phylogenetic relationships and to design the specific primers. The PCR products from three picoplanktons were compared with those from five other cyanobacteria, Melosira (diatom), Staurastrum (green alga), bacteria from Lake Baikal, and humans. The picogram order of template DNA from picoplankton was specifically amplified by the primers. When the template of picoplankton was mixed with human tissue, at least 10 ng of template DNA was needed to obtain a PCR product. The efficiency of PCR was increased more than hundredfold by isolating the picoplankton from human lung tissue. The specific PCR products of the picoplankton were obtained from a formalin-fixed drowning body (lung and liver) that was found in a downstream river and Lake Biwa. The PCR analysis of the picoplanktion 16S rDNA is considered useful for the diagnosis of death by drowning.     

PtBr2-catalyzed consecutive enyne metathesis-aromatization of 1-(1-methoxy-but-3-enyl)-2-(1-alkynyl)benzenes: dual role of the Pt catalyst

1,7-Enynes 1, connected through an aromatic ring and bearing a leaving methoxy group at the 4-position, underwent the PtBr(2)-catalyzed enyne metathesis followed by aromatization in one pot to afford vinyl naphthalenes 3 in good to acceptable yields. The cyclobutene intermediate 11a and another intermediate 2a were isolated, indicating that PtBr(2) acts as a dual role catalyst: (1) as a transition metal catalyst, it induces the enyne metathesis to produce 11a starting from 1a, and (2) as a Lewis acid catalyst, it facilitates elimination of MeOH from 2a to give the aromatized product 3a.     

New organosols of nickel sulfides,palladium sulfides,manganese sulfide,and mixed metal sulfides and their use in preparation of semiconducting polymer-metal sulfide composites

Organosols of NiS, PdS, and MnS in N,N-dimethylformamide were prepared by reaction of the metal acetate with H₂S. Organosols of mixed-metal sulfides (Zn _x Cd_1–x S, Hg _x Cd_1–x S, Hg _x Cu_1–x S, Cd _x Mn_1–x S, Hg _x Mn_1–x S, Hg _x Cd_1–x S, and Mn _x Zn_1–x S) were similarly obtained by reaction of mixtures of the metal salts with H₂S. The organosol of Zn_0.5Cd_0.5S contained particle with two particle size distributions centered at 6.5 nm and 29 nm, as revealed by Ar laser-scattering analysis. The metal sulfides are recovered by addition of Et₂O to the organosols. Zn _x Cd_1–x S thus obtained shows magnetic susceptibility in the range 0.5×10^–6–2.3×10^–6 emug^–1 depending on thex value. Addition of polymers to the organosols affords semiconducting films of metal sulfide-polymer composites.     

A novel oligothiophene derivative as a hole‐transport with emitting material for OLED

A novel oligothiophene derivative containing the triphenylamine moiety with high glass transition temperature (T_g; 135 °C), 5,5′‐{bis[4‐di(4‐thiophenyl)amino]phenyl}‐2,2′‐bithiophene (TTPA‐dimer) was synthesized by the dimerization of tris[4‐(2‐thienyl)phenyl]amine (TTPA) with a palladium catalysis. Some types of electroluminescent (EL) devices that use the amorphous material for a hole‐ and an electron‐transporting with an emitting layer were fabricated. These devices emitted a bright green‐yellowish light (λ_emi; around 510 nm) with a small full width at half maximum (FWHM) rather than that of Alq₃. The single layer EL device showed a maximum luminance of 221 cd/m² at 8 V (0.06 lm/W at 100 cd/m²). On the other hand, the double layer (TTPA‐dimer/Alq₃) EL device that used Alq₃ as the electron transport material was increased up to 10830 cd/m² at 12 V (0.89 lm/W at 300 cd/m²) and with a lower turn‐on voltage (3.2 V at 0.1 cd/m²) than other types of EL devices. Copyright © 2003 John Wiley & Sons, Ltd.     

Stereoselective acid-catalyzed homoallylic rearrangement of cyclopropylsilylmethanols: an efficient route to Z-homoallyl derivatives

Treatment of cyclopropylsilylmethanols derived from cyclopropyl silyl ketones with acid catalyst gives the corresponding silyl-substituted homoallyl derivatives in high yields with good stereoselectivity, independent of the substituents on the cyclopropyl ring. Cyclopropylsilylmethanols having a n-, s-butyl or phenyl group on the carbinyl carbon react to afford the E-homoallyl derivatives selectively. On the other hand, the reaction of cyclopropylsilylmethanols having a tert-butyl group gives Z-isomers exclusively. The following protiodesilylation of the resulting homoallyl derivatives proceeds with retention of configuration.