Vapor hydration of SON68 glass from 90 °C to 200 °C: A kinetic study and corrosion products investigation

Corrosion of nuclear waste glass in unsaturated conditions is expected to occur upon the closure of the repository galleries during disposal cell saturation in the proposed French disposal site. The objectives of the present work were to determine the alteration kinetics of the SON68 reference in such conditions. Vapor hydration tests were conducted using thin, polished SON68 glass coupons contained in stainless steel autoclaves. Temperatures ranged between 90 °C and 200 °C and the relative humidity (RH) was maintained at 91 ± 1%. Additional experiments at 175 °C and 80, 85, 90 and 95% RH were also conducted to assess the role of RH on the glass corrosion rate. The nature and extent of corrosion have been determined by characterizing the reacted glass surface with scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy dispersive X-ray spectroscopy (EDS). Elemental profiling of the glass hydrated at 90 °C was studied by TOF-SIMS. The chemical composition of the external layer depends on experimental conditions. The hydration rate at 90 °C (TOF-SIMS analysis) is 10 × higher than the generally accepted final rate of SON68 in water at 90 °C (~ 10^? 4 g m^? 2 d^? 1). This may indicate that the glass hydration process cannot be simulated by experiments in aqueous solution with a high S/V ratio. Subsequent leaching (corrosion in an aqueous solution) of samples weathered in water vapor showed dissolution rate values higher than those of pristine glass. This result indicates that mobile elements are trapped within the alteration products during the hydration step and it gives insight into mobility variations of the considered elements.     

Close-packed colloidal crystalline arrays composed of silica spheres coated with titania

Titania coated monodisperse silica spheres have been synthesized and fabricated as a close-packed colloidal crystalline array. We have demonstrated that the coated colloidal sphere can be used to control the peak position of the optical stop band through variation of the coating thickness. The titania coated silica spheres were prepared by the layer-by-layer assembly coating process, which reciprocally laminates the cationic polyelectrolyte and the anionic titania nanosheets on a monodisperse silica spheres, and were sintered to change the titania nanosheets to anatase. The Bragg diffraction peak of the colloidal crystalline array shifted to the long wavelength region with an increase of thickness of the titania layer. Angle-resolved reflection spectra measurements clarified that the red shift was caused by increasing of the refractive index with increase of the thickness of the layer. The current work suggests new possibilities for the creation of advanced colloidal crystalline arrays with tunable optical properties from tailored colloidal spheres.     

Magnetic alteration of crystallite alignment converting powder to a pseudo single crystal

The powder crystallites of L-alanine, selected for demonstration purposes, suspended in a photocurable resin were subjected to a frequency-modulated rotating magnetic field, and the achieved three-dimensional alignment was fixed by photopolymerization of the resin. The obtained sample exhibited the X-ray diffraction pattern that was comparable to the pattern of an equivalent actual original single crystal. This was achieved for the first time by the simultaneous alignment of the two magnetic axes, i.e., the easy and hard magnetization axes with respect to the space coordinates. A theoretical estimation indicates that a better alignment of the sample can be obtained if the sample preparation conditions are improved.     

Soluble-insoluble-soluble transitions of aqueous poly(N-vinylacetamide-co-acrylic acid) solutions

Several poly(N-vinylacetamide-co-acrylic acid)s with various copolymer compositions have been synthesized, and their unique phase-transition behavior in aqueous salt (Na2SO4 or NaCl) solutions was investigated. Copolymers containing more than 51 mol % N-vinylacetamide (NVA) show reentrant soluble-insoluble-soluble transitions with increasing temperature. The soluble-insoluble transition temperature (T(p1)) increased linearly with increasing NVA content, whereas the insoluble-soluble transition temperature (T(p2)) was almost constant irrespective of the NVA content. Potentiometric titration of the copolymer solutions suggested that the acrylic acid (AA) carboxyl groups form hydrogen bonds with the NVA amide groups even under soluble conditions. Dehydration of the NVA amides and their consequent hydrogen bonding with the AA carboxyl groups during the soluble-insoluble transition process was indicated by FTIR measurements. Addition of salt (Na2SO4 or NaCl) to the aqueous media reduces the solvent quality and enhances the intra- and interchain interactions of the copolymers. Thus, T(p1) was observed to decrease and T(p2) was observed to increase with increasing salt concentration. However, the addition of urea to the media reverses the concentration dependence of T(p1) and T(p2) by disturbing the intra- and interchain interactions of the copolymers.     

Enzymatic generation of the antimetabolite gamma,gamma-dichloroaminobutyrate by NRPS and mononuclear iron halogenase action in a streptomycete

Four adjacent open reading frames, cytC1-C4, were cloned from a cytotrienin-producing strain of a Streptomyces sp. by using primers derived from the conserved region of a gene encoding a nonheme iron halogenase, CmaB, in coronamic acid biosynthesis. CytC1-3 were active after expression in Escherichia coli, and CytC4 was active after expression in Pseudomonas putida. CytC1, a relatively promiscuous adenylation enzyme, installs the aminoacyl moieties on the phosphopantetheinyl arm of the holo carrier protein CytC2. CytC3 is a nonheme iron halogenase that will generate both gamma-chloro- and gamma,gamma-dichloroaminobutyryl-S-CytC2 from aminobutyryl-S-CytC2. CytC4, a thioesterase, hydrolytically releases the dichloroaminobutyrate, a known streptomycete antibiotic. Thus, this short four-protein pathway is likely the biosynthetic source of this amino acid antimetabolite. This four-enzyme system analogously converts the proS-methyl group of valine to the dichloromethyl product regio- and stereospecifically.     

Pressure effect on the electrical conductivity and superconductivity of beta-(BDA-TTP)2I3

The pressure-induced electrical conductivity properties of beta-(BDA-TTP)2I3 have been investigated; the salt exhibits a dramatic change in the conductivity behaviour above ca. 10 kbar and undergoes a superconducting transition with an onset near 10 K.     

Total synthesis of (-)-5,6,11-trideoxytetrodotoxin and its 4-epimer

[reaction: see text] The first total synthesis of 5,6,11-trideoxytetrodotoxin (1) and its 4-epimer were achieved. The synthesis is characterized by the stereoselective construction of the quaternary amino carbon center at C8a by an asymmetric transferring Strecker synthesis and the highly efficient conversion of cyanohydrin 4 to 1 via intramolecular cyclization reactions.     

Novel analytical applications of porphyrin to HPLC post-column flow injection system for determination of the lanthanides

A novel indirect substitution spectrophotometric methodology using porphyrin is developed for the determination of some metals that do not react with porphyrin directly. The methodology is concerned with a multistep reaction system, which consists of 3 complexation reactions that occur in a sequence of EDTA with metal, EDTA with Cu(II) and porphyrin with Cu(II). The complexation reaction of Cu(II) with a cationic porphyrin, meso-tetrakis (4-N-trimethylaminophenyl)-porphine (ttmapp), which has a high molar absorptivity about 5 × 10⁵ l mol⁻¹ cm⁻¹, serves for spectrophotometric detection. This methodology was verified through individual determinations of 14 species of lanthanides following a batchwise procedure, which was further developed to an automatic procedure on a HPLC post-column flow injection system for simultaneous analysis of the lanthanides. Compared with the conventional post-column derivatization method using 4-(2-pyridylazo) resorcinol (PAR), the analytical sensitivity was greatly improved in this method and the results also showed good linearity.     

Palladium-catalyzed stereospecific synthesis of 2,6-disubstituted tetrahydropyrans: 1,3-chirality transfer by an intramolecular oxypalladation reaction

PdCl2(CH3CN)2 (10 mol %) catalyzed reactions of non-3-ene-2,8-diols 1 and 2 gave 2,6-disubstituted tetrahydropyrans 3 and 4 in excellent yields with high diastereoselectivities (>20:1). Intramolecular cyclizations of the hydroxy nucleophile to the chiral allylic alcohol take place efficiently under mild conditions. A new stereogenic center is generated on the tetrahydropyran ring by 1,3-chirality transfer from the chiral allylic alcohol via a syn-SN2' type process. Cis tetrahydropyran 3E was formed from syn-2,8-diols 1a and 2a, and trans tetrahydropyran 4E was formed from anti-2,8-diol 1b, stereospecifically. Cis tetrahydropyran bearing a cis alkene 3Z was obtained from 2b at -40 degrees C, while 4E was formed from 2b in the presence of catalytic amount of water at -40 degrees C. The face selectivity of these cyclizations can be rationalized by taking a favorable conformation of the intermediary Pd pi-complex with allylic alcohols, escaping the allylic strain and 1,3-diaxial interactions. A stereocontrolled synthesis of optically pure 2-alkenyl-6-methyltetrahydropyran 17 was achieved efficiently in four steps from 6-silyloxy-1-heptyne 13 with an aldehyde and included asymmetric alkynylation, partial reduction of alkyne, deprotection of the silyl group, and the stereospecific cyclization.