Enantioselective desymmetrization of meso-N-(heteroarenesulfonyl)aziridines with TMSN3 catalyzed by chiral Lewis acids

A catalytic enantioselective desymmetrization of meso-N-(heteroarenesulfonyl)aziridines with TMSN₃ using chiral Lewis acids afforded products with high enantioselectivity. As proof of the utility of this procedure, the precursor of selective κ-opioid agonist (1S,2S)-(−)-U-50,488 was synthesized.     

Fabrication and electron transport properties of epitaxial films of electron-doped 12CaO·7Al2O3 and 12SrO·7Al2O3

Epitaxial growth and electron doping of 12CaO·7Al₂O₃ (C12A7) and 12SrO·7Al₂O₃ (S12A7) are reported. The C12A7 films were prepared on Y₃Al₅O₁₂ (YAG) single-crystal substrates by pulsed laser deposition at room temperature and subsequent thermal crystallization. X-ray diffraction patterns revealed the films were grown epitaxially with the orientation relationship of (001)[100] C12A7 || (001)[100] YAG. For S12A7, pseudo-homoepitaxial growth was attained on the C12A7 epitaxial layer. Upon electron doping, metallic conduction was achieved in the C12A7 film and the S12A7/C12A7 double-layered films. Analyses of optical absorption spectra for the S12A7/C12A7 films provided the densities of free electrons in each layer separately. Hall measurements exhibited larger electron mobility in the S12A7/C12A7 film than those in C12A7 and S12A7 films, suggesting free electrons may be accumulated at the S12A7/C12A7 interface due presumably to a discontinuity of the cage conduction bands.     

Real-space finite-difference approach for multi-body systems: path-integral renormalization group method and direct energy minimization method

The path-integral renormalization group and direct energy minimization method of practical first-principles electronic structure calculations for multi-body systems within the framework of the real-space finite-difference scheme are introduced. These two methods can handle higher dimensional systems with consideration of the correlation effect. Furthermore, they can be easily extended to the multicomponent quantum systems which contain more than two kinds of quantum particles. The key to the present methods is employing linear combinations of nonorthogonal Slater determinants (SDs) as multi-body wavefunctions. As one of the noticeable results, the same accuracy as the variational Monte Carlo method is achieved with a few SDs. This enables us to study the entire ground state consisting of electrons and nuclei without the need to use the Born-Oppenheimer approximation. Recent activities on methodological developments aiming towards practical calculations such as the implementation of auxiliary field for Coulombic interaction, the treatment of the kinetic operator in imaginary-time evolutions, the time-saving double-grid technique for bare-Coulomb atomic potentials and the optimization scheme for minimizing the total-energy functional are also introduced. As test examples, the total energy of the hydrogen molecule, the atomic configuration of the methylene and the electronic structures of two-dimensional quantum dots are calculated, and the accuracy, availability and possibility of the present methods are demonstrated.     

Electrochemical properties of thin TiO2 electrode on Li1 + xAlxGe2 − x(PO4)3 solid electrolyte

A fabrication of all-solid-state thin-film rechargeable lithium ion batteries by sol-gel method is expected to achieve both the simplification and cost reduction for fabrication process. TiO₂ thin film electrode was prepared by PVP (polyvinylpyrrolidone) sol-gel method combined with spin-coating on Li_1 + xAl_xGe_2 − x(PO₄)₃ (LAGP) solid electrolyte which has wide electrochemical window. The thin film was composed of anatase TiO₂ that is the most active phase for Li insertion and extraction and contacted well with LAGP substrate. In the cyclic voltammogram, a redox couple was observed at 1.8 V vs. Li/Li⁺ assigned to Li insertion/extraction into/from anatase TiO₂, indicating that the thin film worked as electrode for lithium battery. The charge and discharge test in various charge and discharge rates revealed that the discharge process (delithiation) is thought to be faster than charge process (lithiation). It is attested that the sol-gel process, which derives both simplification and cost reduction for fabrication process, can be applied to thin film battery using LAGP solid electrolyte.     

Czochralski-growth of germanium crystals containing high concentrations of oxygen impurities

Oxygen-containing germanium (Ge) single crystals with low density of grown-in dislocations were grown by the Czochralski (CZ) technique from a Ge melt, both with and without a covering by boron oxide (B₂O₃) liquid. Interstitially dissolved oxygen concentrations in the crystals were determined by the absorption peak at 855 cm⁻¹ in the infrared absorption spectra at room temperature. It was found that oxygen concentration in a Ge crystal grown from melt partially or fully covered with B₂O₃ liquid was about 10¹⁶ cm⁻³ and was almost the same as that in a Ge crystal grown without B₂O₃. Oxygen concentration in a Ge crystal was enhanced to be greater than 10¹⁷ cm⁻³ by growing a crystal from a melt fully covered with B₂O₃; with the addition of germanium oxide powder, the maximum oxygen concentration achieved was 5.5×10¹⁷ cm⁻³. The effective segregation coefficients of oxygen in the present Ge crystal growth were roughly estimated to be between 1.0 and 1.4.     

Synthesis of end‐functionalized poly(phenylacetylene)s with well‐characterized palladium catalysts

End‐functionalized poly(phenylacetylene)s were synthesized by the polymerization of phenylacetylene (PA) using the well‐defined palladium catalysts represented as [(dppf)PdBr(R)] {dppf = 1,1′‐bis(diphenylphosphino)ferrocene}. The Pd catalysts having a series of R groups such as o‐tolyl, mesityl, C(Ph)?CPh₂, C₆H₄‐o‐CH₂OH, C₆H₄‐p‐CN, and C₆H₄‐p‐NO₂ in conjunction with silver triflate polymerized PA to give end‐functionalized poly(PA)s bearing the corresponding R groups in high yields. The results of IR and NMR spectroscopies and MALDI‐TOF mass analyses proved the introduction of these R groups at one end of each polymer chain. The poly(PA) bearing a hydroxy end group was applied as a macroinitiator to the synthesis of a block copolymer composed of poly(PA) and poly(β‐propiolactone) moieties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and properties of carbamate‐ and amine‐containing poly(phenylacetylenes)

The 3‐ and 4‐aminophenylacetylenes protected by t‐butoxycarbonyl (t‐Boc) and 9‐fluorenylmethoxycarbonyl (Fmoc) groups ( 3a – 6a ) were synthesized and polymerized using [(nbd)RhCl]₂ ( 1 ) and [(nbd)Rh⁺‐η⁶‐PhB^?Ph₃] ( 2 ) catalysts. The t‐Boc‐containing polymers [poly( 3a ) and poly( 4a )] were obtained in high yield (82–91%). Among the Fmoc‐protected monomers, the para‐derivative polymerized well [poly( 6a ); yield = 85–94%], whereas its meta‐substituted analogue did not afford high molecular weight polymer in good yield [poly( 5a ); yield = 10–15%]. The use of KN(SiMe₃)₂ as a cocatalyst in conjunction with 1 led to a dramatic increase in the molecular weight of the polymers. The acid‐ and base‐catalyzed removal of the t‐Boc and the Fmoc groups, respectively, generated primary amine‐containing polymers [poly( 3b )–poly( 6b )] which cannot be obtained directly by the polymerization of the corresponding monomers. The solubility characteristics of the polymers bearing protected amino groups were quite different from those of the unprotected ones, the former being soluble in polar solvents, whereas the latter displayed poor solubility even in polar protic or highly polar aprotic solvents. The attempts to accomplish the free‐standing membrane fabrication by solution casting were successful only for poly( 3a ), and an augmentation in the gas permeability and CO₂/N₂ permselectivity was discerned in comparison with the unsubstituted poly(phenylacetylene) and poly(m‐t‐butyldimethylsiloxyphenylacetylene). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1853–1863, 2009     

Crystallographic analysis of a pair of isolable atropisomers of 2-aryl substituted indoline derivatives

The crystal and molecular structures of isomeric compounds of 1-(4′-chlorobenzoyl)-2-(2″-hydroxynaphthyl)-3,3-Dimethylindoline have been determined by single crystal X-ray analyses as a pair of diastereomeric atropisomers due to restricted rotation about a Csp³-Csp² bond.     

Novelty Filtering Using Phase Conjugate Wave in Organic Dye-Doped Polymer Films

A real-time detection of a moving object was demonstrated by taking the subtraction between cross-polarized phase conjugate waves with fast and slow response times with two kinds of dye-doped phase conjugators. One consists of superposed films of an erythrosin-B-doped film and a methyl-orange-doped film, and the other is a film dispersed with both dyes. The relative phase between cross-polarized phase conjugate waves by the both dye-dispersed films was stable.     

Efficient Synthesis,Structure, and Complexation Studies of Electron‐Donating Thiacalix[n]dithienothiophene

A series of thiacalix[n]dithiothiophenes (n=4–10) was prepared by a facile method and X‐ray analysis was used to determine the molecular structures of square‐ (4‐mer) and pentagonal‐shaped macrocycles (5‐mer). In the cyclic voltammograms, reversible multielectron redox processes, which are due to electronic delocalization, were observed at low oxidation potentials. The cyclic 4‐mer acted as a “Janus‐head” cavitand for two C₆₀ molecules, whereas the 5‐ and 6‐mer formed stable 1:1 complexes with C₆₀ .