Fluorinated monomer–styrene copolymer latex particles: I. kinetic studies in a soap-free aqueous medium

Soap-free emulsion copolymerization of 2, 2, 2-trifluoroethyl acrylate (3FEA) with styrene was carried out by using potassium persulfate as an initiator, and the effects of the weight fraction of 3FEA in the monomer feed on the kinetics and the particle size were investigated. Monomer conversions were followed by a gravimetric method, revealing that the overall polymerization rate increased exponentially with an increase in the weight fraction of 3FEA. According to dynamic light scattering measurement, the final particle size was found to decrease with an increase in the weight fraction of 3FEA. The number of particles for 3FEA homopolymerization was roughly twice as large as that at the fraction of 0.9, although both fractions had the almost same polymerization rates. These results indicate that soap-free emulsion homopolymerization of 3FEA would proceed not only inside the polymer particles but also in the aqueous phase throughout the polymerization.     

The effects of epimerization at the 3(1)-position of bacteriochlorophylls c on their aggregation in chlorosomes of green sulfur bacteria. Control of the ratio of 3(1) epimers by light intensity

R- and S-epimerization at the 3(1) position of bacteriochlorophyll (BChl) c and the formation of rod-like aggregates in chlorosomes of green sulfur bacteria were markedly affected in Chlorobium (Cb.) tepidum and Cb. limicola by cultivation under various light intensities (photon fluence rate). The stronger the light, the higher the ratio of the S-epimer to the R-epimer for each homolog of BChl c in the bacteria. S[P,E] BChl cF and S[I,E] BChl cF were found to be the major S-epimers in Cb. tepidum and Cb. limicola, respectively. R[P,E] BChl cF decreased markedly compared to R[E,E] BChl cF in Cb. tepidum, whereas no observable change in the ratio of R[P,E]/R[E,E] was detected for Cb. limicola. With increase in light intensity the Qy absorption maximum of the bacteria shifted to shorter wavelengths. In vitro spectroscopic studies of the aggregates showed a marked difference in the formation of aggregates from R- and S-epimers of BChl c; the S-epimers formed aggregates much more slowly than did the R-epimers. These results suggest that the ratio of the epimers of BChl c might significantly affect the aggregation of BChl in the chlorosome. We propose different roles for the R- and S-epimers in chlorosomes of Cb. limicola and Cb. tepidum.     

Hydrogen Effect on Coke Removal and Catalytic Performance in Pre-Carburization and Methane Dehydro-Aromatization Reaction on Mo/HZSM-5

1. Introduction As an effective utilization of methane, the methane dehydro-aromatization was focused in the last decade [1-28]. Over the Mo/HZSM-5 bi- functional catalyst at high reaction temperature, methane can be converted into light aromatics (ben- zene and naphthalene) and hydrogen. Mo active species can activate the C—H bond of methane; and HZSM-5 supplies the acid sites for the oligomeriza- tion and cyclization of hydrocarbons to form aromat- ics, and suppresses the deeper condens…     

A concept for controlling singlet oxygen (1 Delta g) yields using nitroxide radicals: phthalocyaninatosilicon covalently linked to nitroxide radicals

In this study, we have investigated the singlet oxygen ((1)Delta(g)) generation mechanism using phthalocyaninatosilicon (SiPc) covalently linked to nitroxide radicals (NRs), and we succeeded in increasing the singlet oxygen quantum yield (Phi(Delta)) by linking the NRs. This originates from both an increase in the triplet quantum yield and excited-state lifetimes long enough to utilize photochemical reactions. Because the electron exchange interactions with paramagnetic species were known to result only in very fast excited-state relaxation, leading to a decrease in photochemical reaction yields, this increase in Phi(Delta) is an unusual and precious example for increasing photochemical reaction yields by electron exchange interactions with paramagnetic species. In addition, our experiments and theoretical analyses show that the spin-selective energy transfer rate constant is not influenced by linking the NRs and can be evaluated by the product of spin-statistical factors and matrix elements between the initial and final states.     

Factors affecting physicochemical properties of liposomes prepared with hydrogenated purified egg yolk lecithins by the microencapsulation vesicle method

We examined hydrogenated purified egg yolk lecithins, having practical advantages over non-hydrogenated ones, as liposomal membrane materials. Liposomes were prepared by the microencapsulation vesicle (MCV) method in which liposomes are formed through two-step emulsification and dispersion. Three types of purified egg yolk lecithins with different iodine values were examined after being dissolved in one of three lipid solvents. The liposome size increased as the temperature during the second emulsification increased, being closer to the boiling temperature of the solvent. The preparation temperature in relation to the transition temperature of each lecithin was also a factor affecting liposome sizes. As for the encapsulation efficiencies of the model compound calcein in liposomes, they differed mainly depending on the solubility of each lecithin in a lipid solvent and it was more obvious in hydrogenated lecithins. A high preparation temperature resulted in lower encapsulation efficiencies, suggesting that leakage of encapsulated calcein was facilitated at high temperature in the MCV methods. There was a significant correlation between liposome sizes and encapsulation efficiencies in non-hydrogenated purified egg yolk lecithin but not in hydrogenated ones. When using hydrogenated purified egg yolk lecithins as liposomal membrane materials, it was suggested that a lipid solvent should be chosen so that a lecithin completely dissolves under the preparation condition in order to achieve a higher encapsulation efficiency. Smaller liposome particles were obtained when the second emulsification was performed at a lower temperature compared with the boiling point of the lipid solvent. These findings can be applied to control encapsulation efficiencies and particle sizes in each particular liposome preparation enclosing therapeutic agents.     

Simultaneous discrimination of diastereotopic groups and faces: the first example in intramolecular [3+2] and [2+2+1] cycloaddition reactions

To explore a novel concept for controlling diastereoselectivity, systematic studies on the sense and degree of diastereotopic groups and face selections in intramolecular [3 + 2] (nitrile oxide and nitrone) and [2 + 2 + 1] (Pauson-Khand) cycloadditions have been conducted. Optically pure methyl (S)-3,4-O-isopropylidene-3,4-dihydroxybutanoate (5) and methyl (S)-2,3-O-isopropylidene-2,3-dihydroxypropanoate (6) were converted to substrate aldehydes (1-4) that bear geminal allyl groups and four types of controllers with the intention of imparting a stereochemical bias to the allylic groups and their faces. The controllers involve 1,2-bis(tert-butyldimethylsiloxy), 1,3-bis(tert-butyldimethylsiloxy), 1,2-acetonide, and 1,3-acetonide groups, which are referred to as 1,2-(TBDMSO)(2), 1,3-(TBDMSO)(2), 1,3-dioxolane, and 1,3-dioxane, respectively. Twelve runs of cycloaddition reactions as combinations between the three types of reactions and the four types of substrates were performed to provide bicyclo[4.3.0] or -[3.3.0] adducts of synthetic importance in which isoxazolidine, isoxazoline, or cyclopentenone segments were fused. For every case, high levels of diastereoselectivity have been achieved: >99% (in eight cases), 82%, and 76% for the discrimination of diastereotopic groups and 68-->99% for the discrimination of diastereotopic faces. On the basis of the absolute structures of the cycloadducts, plausible stereochemical models are proposed.     

Correlation between the structure of water in the vicinity of carboxybetaine polymers and their blood-compatibility

The structure and hydrogen bonding of water in the vicinity of carboxybetaine homopolymer (poly[1-carboxy-N,N-dimethyl-N-(2'-methacryloyloxyethyl)methanaminium inner salt] (PolyCMB), and a random copolymer of CMB and n-butyl methacrylate, Poly(CMB-r-BMA), with various molecular weights were analyzed in their aqueous solutions and thin film with contours of O-H stretching of Raman and attenuated total reflection infrared (ATR-IR) spectra, respectively. The relative intensity of the collective band (C value) corresponding to a long-range coupling of O-H stretchings of the Raman spectra for aqueous solution of Poly(CMB-r-BMA) was very close to that for pure water, which is in contrast with the smaller C value in aqueous solution of ordinary polyelectrolytes. The number of hydrogen bonds collapsed by the presence of one monomer residue (N(corr) value) of PolyCMB and Poly(CMB-r-BMA) (CMB, 45 mol %) (M(w), 1.14 x 10(4) and 1.78 x 10(4), respectively) could be calculated from the C value. The N(corr) values were much smaller than those for ordinary polyelectrolytes and close to those for nonionic water-soluble polymers such as poly(ethylene glycol) and poly(N-vinylpyrrolidone). Furthermore, a water-insoluble Poly(CMB-r-BMA) with a large BMA content (M(w) = 347 kD, CMB 27 mol %) could be cast as a thin film (thickness, ca. 10 microm) on a ZnSe crystal for the ATR-IR analyses. At an early stage of sorption of water into the Poly(CMB-r-BMA) film, the O-H stretching band of IR spectra for the water incorporated in the film was similar to that for free water, which is in contrast with the drastic change in the O-H stretching band of water incorporated in polymer films such as poly(methyl methacrylate) (PMMA) and poly(n-butyl methacrylate) (PBMA). The theoretical vibrational frequency for water molecules hydrating a betaine molecule calculated by using a density functional method supported the experimental results. The adhesion of human platelets to Poly(CMB-r-BMA) films was much less than that to PMMA and PBMA. With an increase in the content of CMB residue, the number of platelets adhered to the Poly(CMB-r-BMA) film drastically decreased and then gradually increased, probably due to the increase in the roughness of the film surface. These results suggest that the carboxybetaine monomer residues with a zwitterionic structure do not significantly disturb the hydrogen bonding between water molecules in both aqueous solution and thin film systems, resulting in the excellent blood-compatibility of the carboxybetaine polymers.     

Reactions of group IV organometallic compounds : XXVII. Some reactions of [(trimethylsilyl)imino]phosphorane

The reaction of [(trimethylsilyl)imino]methyldiphenylphosphorane: Ph₂MePNSiMe₃ (I) with several acid anhydrides or alkyl isocyanates took place by the simple cleavage of silicon-nitrogen bond. In contrast the interaction of (I) with phenyl isocyanate, isothiocyanate or carbon disulphide led to addition-elimination reactions of the Wittig type. Detailed investigation in the case of phenyl isocyanate indicated the usual elimination of Ph₂MePO is suppressed by the strong affinity of the trimethylsilyl group for anionic oxygen atom.     

Stereoselective ring-opening polymerization of racemic lactide using aluminum-achiral ligand complexes: exploration of a chain-end control mechanism

Stereoselective polymerization of racemic lactide (rac-LA) was examined using Al-achiral ligand complexes. By introduction of substituents in aromatic rings of Schiff base ligands, a higher selectivity was obtained without any chiral auxiliaries in the catalyst via a chain-end control mechanism. The T(m) values (T(m) 170-192 degrees C) were comparable to or higher than that of homochiral polymer, poly(L-LA) (T(m) 162 degrees C), and a thermally more stable polylactide than poly(L-LA) was prepared from rac-LA.     

Relationship between symmetry of porphyrinic pi-conjugated systems and singlet oxygen (1Delta g) yields: low-symmetry tetraazaporphyrin derivatives

We have investigated the excited-state properties and singlet oxygen ((1)Delta(g)) generation mechanism in phthalocyanines (4M; M = H(2), Mg, or Zn) and in low-symmetry metal-free, magnesium, and zinc tetraazaporphyrins (TAPs), that is, monobenzo-substituted (1M), adjacently dibenzo-substituted (2AdM), oppositely dibenzo-substituted (2OpM), and tribenzo-substituted (3M) TAP derivatives, whose pi conjugated systems were altered by fusing benzo rings. The S(1)(x) and S(1)(y) states (these lowest excited singlet states are degenerate in D(4)(h) symmetry) split in the low-symmetry TAP derivatives. The excited-state energies were quantitatively determined from the electronic absorption spectra. The lowest excited triplet (T(1)(x)) energies were also determined from phosphorescence spectra, while the second lowest excited triplet (T(1)(y)) states were evaluated by using the energy splitting between the T(1)(x) and T(1)(y) states previously reported (Miwa, H.; Ishii, K.; Kobayashi, N. Chem. Eur. J. 2004, 10, 4422-4435). The singlet oxygen quantum yields (Phi(Delta)) are strongly dependent on the pi conjugated system. In particular, while the Phi(Delta) value of 2AdH(2) is smallest in our system, that of 2OpH(2), an isomer of 2AdH(2), is larger than that of 4Zn, in contrast to the heavy atom effect. The relationship between the molecular structure and Phi(Delta) values can be transformed into a relationship between the S(1)(x) --> T(1)(y) intersystem crossing rate constant (k(ISC)) and the energy difference between the S(1)(x) and T(1)(y) states (DeltaE(S)(x)(T)(y)). In each of the Zn, Mg, and metal-free compounds, the Phi(Delta)/tau(F) values (tau(F): fluorescence lifetime), which are related to the k(ISC) values, are proportional to exp(-DeltaE(S)(x)(T)(y)), indicating that singlet oxygen ((1)Delta(g)) is produced via the T(1)(y) state and that the S(1)(x) --> T(1)(y) ISC process follows the energy-gap law. From the viewpoint of photodynamic therapy, our methodology, where the Phi(Delta) value can be controlled by changing the symmetry of pi conjugated systems without heavy elements, appears useful for preparing novel photosensitizers.